Materials 

Yarn: Gazzal Jeans – 1 skein of main color, + additional colors. 

Safety eyes: 2 pieces. 

Eyelashes, glue (crystal moment). 

Hook № 1.5. 

Transparent crystal moment glue. 

Filling – any. 

Markers or marking thread. 

Wire – 2mm wrapped – 110cm, 2mm unwrapped – 30cm. 

Abbreviations 

MR – magic ring 

ch – chain 

sc – single crochet 

hdc – half double crochet 

dc – double crochet 

inc – increase (work 2 sc in one stitch) 

dec – decrease (work 2 sc together) 

FLO – front loop only 

BLO – back loop only 

3-in-1 – work 3 sc in one stitch. 

sl st – slip stitch. 

PATTERN

Mouth 

Rnd 1: 6 in MR. 

Rnd 2: (inc) x 6 (12). 

Rnd 3-4: 12 sc. 

Fold in half and crochet through both walls 6 sc. 

Lower Legs (Feet) 

First, crochet the toes (3 pieces). 

Rnd 1: 6 in MR. 

Rnd 2-3: 6 sc. 

On the third toe, do not cut the yarn, continue crocheting. 

Rnd 4: 6 sc on the first toe, 3 sc on the third toe, 6 sc on the second toe, 3 sc on the third toe (18). 

Rnd 5: 18 sc. 

Rnd 6: (4 sc, dec) x 3 (15). 

Insert wire (19cm). 

Rnd 7: (3 sc, dec) x 3 (12). 

Rnd 8: 12 sc. 

Rnd 9: (2 sc, dec) x 3 (9). 

Rnd 10: (1 sc, dec) x 3 (6). Fill the paw with filler. 

Rnd 11-25: 6 sc (15 rows). Fasten off, cut the thread. Crochet the second leg. 

Upper Legs (Arms) 

First, crochet the fingers (3 pieces). 

Rnd 1: 4 in MR. 

Rnd 2-3: 4 sc. 

On the third finger, do not cut the yarn, continue crocheting. 

Rnd 4: 4 sc on the first finger, 2 sc on the third finger, 4 sc on the second finger, 2 sc on the third finger (12). 

Rnd 5: 12 sc. Insert wire (10cm + 3cm + 3cm). 

Rnd 6: (2 sc, dec) x 3 (9). 

Rnd 7: (1 sc, dec) x 3 (6). 

Rnd 8-17: 6 sc (10 rows). Fasten off, cut the thread. Crochet the second arm. 

Face 

Rnd 1: 6 in MR. 

Rnd 2: (inc) x 6 (12). 

Rnd 3: (1 sc, inc) x 6 (18). 

Rnd 4: (2 sc, inc) x 6 (24). 

Rnd 5: (3 sc, inc) x 6 (30). 

Rnd 6: (4 sc, inc) x 6 (36). 

Rnd 7-8: 36 sc. 

Rnd 9: 20 sc; 5 hdc in one FLO; 10 sc; 5 hdc in one FLO; 4 sc (40). 

Rnd 10: 20 sc; 1 sc BLO; 10 sc; 1 sc BLO; 4 sc (36). 

Rnd 11: (10 sc, dec) x 3 (33). 

Rnd 12: 33 sc. 

Rnd 13: (9 sc, dec) x 3 (30). 

Rnd 14: 5 sc; 6 sc in the loops of the mouth; 19 sc (30). 

Rnd 15-16: 30 sc. 

Rnd 17: 12 sc; (2 sc, inc) x 6 (36). 

Rnd 18: 12 sc; (3 sc, inc) x 6 (42). 

Rnd 19: 8 sc; 8 ch (skip 2 stitches); 32 sc (48). 

Rnd 20: 8 sc; 8 sc in ch; 32 sc (48). 

Rnd 21-22: 48 sc. 

Rnd 23: (6 sc, dec) x 6 (42). 

Rnd 24: 42 sc. 

Rnd 25: (5 sc, dec) x 6 (36). 

Shape a wire frame (37cm). Wrap with adhesive tape; insert into the head. 

Fill with filler. 

Rnd 26: (3 sc, dec) x 6 (24). 

Rnd 27: (2 sc, dec) x 6 (18). 

Rnd 28: (1 sc, dec) x 6 (12). 

Rnd 29: (dec) x 6 (6). Cut the thread, pull the loops together. 

Eyes 

White part 

Rnd 1: 3 ch; from the 2nd stitch from the hook – 3-in-1; in the next stitch – 3-in-1 (6). 

Rnd 2: (1 sc, 3-in-1, 1 sc) x 2 (10). 

Rnd 3: 2 sc; inc; 4 sc; inc; 2 sc (12). 

Fasten off, leaving a tail for sewing. 

Eyelids 

Rnd 1: 6 ch; from the 2nd stitch from the hook – 5 sc. 

Rnd 2: 5 sc along with the loops of the white part. 

Cut the thread, leaving a tail for sewing. Fill a little, sew the eyes to the head. 

Glue the pupils (safety eyes) and eyelashes. 

Ears (Make 2) 

Additional color (inner part) 

Rnd 1: 5 ch; from the 2nd stitch from the hook – 3 sc; 3-in-1; 3 sc along the second side. Ch, turn. 

Rnd 2: 4 sc; 3-in-1; 4 sc (11). Cut the thread. 

Crochet the second part with the main color. Do not cut the thread. Crochet around both parts with sc. Cut the thread, leaving a tail for sewing. Fold in half and make a couple of slip stitches. Crochet the second ear. Sew to the head. 

Body 

Join the thread to the chains of the back of the head. 

Rnd 1: 4 sc; 2 sc on the chains of the 17th row of the head; 4 sc (10). 

Rnd 2-5: 10 sc (4 rows). 

Rnd 6: (4 sc, inc) x 2 (12). 

Rnd 7-8: 12 sc. 

Rnd 9: (5 sc, inc) x 2 (14). 

Rnd 10: 14 sc. 

Rnd 11: (6 sc, inc) x 2 (16). 

Rnd 12: (7 sc, inc) x 2 (18). 

Rnd 13: (2 sc, inc) x 6 (24). 

Rnd 14: (3 sc, inc) x 6 (30). 

Rnd 15: 9 sc; 3 sc together with 3 loops of the arm; 12 sc; 3 sc together with 3 loops of the arm; 3 sc (30). 

Rnd 16: 9 sc; 3 sc around the arm; 12 sc; 3 sc around the arm; 3 sc (30). 

Fill. Twist the wire, wrap with adhesive tape. 

Rnd 17: (4 sc, inc) x 6 (36). 

Rnd 18: 36 sc. 

Rnd 19: 18 sc; (1 sc, inc) x 3; 12 sc (39). 

Rnd 20: 18 sc; (2 sc, inc) x 3; 12 sc (42). 

Rnd 21: 42 sc. 

Rnd 22: 20 sc; (2 sc, inc) x 3; 13 sc (45). 

Rnd 23: 45 sc. 

Rnd 24: 20 sc; (3 sc, inc) x 3; 13 sc (48). 

Rnd 25-28: 48 sc (4 rows). 

Rnd 29: 15 sc; 3 sc together with the loops of the leg; 25 sc; 3 sc together with the loops of the leg; 2 sc (48). 

Rnd 30: 15 sc; 3 sc around the leg; 25 sc; 3 sc around the leg; 2 sc (48). 

Rnd 31: 6 sc; inc; 22 sc; dec; 17 sc (48). Twist the wire, wrap with adhesive tape. Fill. 

Rnd 32: 17 sc; dec; (11 sc, dec) x 2; 3 sc (45). 

Rnd 33: 7 sc; inc; 13 sc; dec; 3 sc; dec; 4 sc; dec; 3 sc; dec; 6 sc (42). 

Rnd 34: 8 sc; inc; 13 sc; dec; 2 sc; dec; 3 sc; dec; 2 sc; dec; 5 sc (39). 

Rnd 35: 9 sc; inc; 10 sc; (dec, 3 sc) x 3; dec; 2 sc (36). 

Rnd 36: 9 sc; inc; 16 sc; dec; 8 sc (36). 

Rnd 37: 10 sc; inc; 10 sc; (dec, 2 sc) x 3; dec; 1 sc (33). 

Rnd 38: 10 sc; inc; 15 sc; dec; 5 sc (33). 

Rnd 39: 21 sc; (2 sc, dec) x 3 (30). 

4 hdc. 

Rnd 40: 7 sc; inc; 8 sc; dec; (2 sc, dec) x 3; (27). 

Rnd 41: 8 sc; inc; 8 sc; dec; 1 sc; (sk 2, 1 sc) x 2; 1 sc; dec (24). 

Rnd 42: 18 sc; (dec) x 3 (21). 

Rnd 43: 9 sc; inc; 9 sc; dec (21). 

2 hdc. Don’t forget about filling. 

Rnd 44: 15 sc; (dec) x 3 (18). 

Rnd 45: 8 sc; inc; 7 sc; dec (18). 

Rnd 46: 18 sc. 

5 hdc. 

Rnd 47: 4 sc; inc; 6 sc; (dec) x 2; 3 sc (17). 

Rnd 48: 12 sc; dec; 3 sc (16). 

Rnd 49: 5 sc; inc; 5 sc; (dec) x 2; 1 sc (15). 

Rnd 50: 15 sc. 

3 hdc. 

Rnd 51: 2 sc; inc; 5 sc; (dec) x 2; 3 sc (14). 

Rnd 52: 14 sc. 

Rnd 53: 4 sc; inc; 4 sc; (dec) x 2; 1 sc (13). 

Rnd 54: 10 sc; dec; 1 sc (12). 

1 hdc. 

Rnd 55: 4 sc; inc; 3 sc; (dec) x 2 (11). 

Rnd 56: 9 sc; dec (10). 

Rnd 57: (dec, 3 sc) x 2 (8). 

Rnd 58: 8 sc. 

Rnd 59: (dec, 2 sc) x 2 (6). 

Rnd 60: 6 sc. Pull the loops together. 

Form the spikes. 

Leaving 1 row from the eyes, join the additional color thread. 

3 ch; in the same loop 4 hdc. 

Pull out the hook, insert it into the stitch of the chains, and pull out the loop (spike). 

Repeat throughout the tail every 2-3 rows. 

Horns (Make 2) 

Rnd 1: 4 in MR. 

Rnd 2: inc; 3 sc (5). 

Rnd 3: inc; 4 sc (6). 

Fasten off, cut the thread, leaving a tail for sewing. 

Crochet the second horn. Sew them on. 

Wings (Make 2) 

Crochet according to the scheme with an additional color. 

Crochet around the wings with sc. Sew them on. 

Heart

Crochet according to the scheme with an additional color. Sew on the belly. 

Ball – Heart 

Rnd 1: 6 in MR. 

Rnd 2: (inc) x 6 (12). 

Rnd 3: (1 sc, inc) x 6 (18). 

Rnd 4-5: 18 sc. 

Crochet the second part. 

Connect the parts. 

Rnd 6-7: 36 sc. 

Rnd 8: (4 sc, dec) x 6 (30). 

Rnd 9: (3 sc, dec) x 6 (24). 

Rnd 10: (2 sc, dec) x 6 (18). 

Insert wire (30cm). 

Fill. 

Rnd 11: (4 sc, dec) x 3 (15). 

Rnd 12: (3 sc, dec) x 3 (12). 

Rnd 13: (2 sc, dec) x 3 (9). 

Rnd 14: (1 sc, dec) x 3 (6). 

Rnd 15: (incFLO) x 6 (12). 

Fasten off, cut the thread. 

Grease the wire with glue, wrap it with thread. 

Insert into the handle. 

The dragon is ready. 

The post Create Your Own Dragon Moxie Amigurumi: Free Pattern for a Magical Friend! appeared first on En.amigurumitariflerim.com.

Materials

Gold yarn
Cream yarn
Turquoise yarn
Black felt
White felt
Brown felt
White cotton yarn (smaller gauge used for toes and finger claws)
Cream embroidery thread (antenna)
Black embroidery thread (underbelly stripes and nostrils)
Fibrefill
Tapestry needle
Scissors
3mm and 2mm crochet hooks
Wire (optional, for wing and leg support. Not really optional for the antenna. You can also add wire to the arms and neck if you want to be able to pose those.)

I used 4 Seasons Marvel 8 ply acrylic wool, but I am in New Zealand so it’s unlikely that you will be able to find this yarn wherever you are! It shouldn’t matter which brand you use, just try to use all the colours from the same range so that you don’t have an issue with the different coloured pieces not matching up. You may also need to change your hook size dependent on your yarn brand. Different yarns will create slightly different sized toys at the end. My finished Dragonite measured 11 x 8 x 9 inches.

Abbreviations

US crochet terms
sc: Single crochet
hdc: Half-double crochet
hdcinc: Half-double crochet increase (2hdc in the same stitch)
dc: Double crochet
ss: Slip stitch
ch: Chain
inc: Increase (2sc in the next stitch)
dec: Decrease (I use invisible decrease when crocheting in the round as I think they look tidier)
[…] x 2: Repeat the instructions within the square brackets 2 times (or whatever the number is)
(…): Number of stitches in that round/row

Instructions will be crocheting in the round and with the 3mm hook unless specified otherwise.

PATTERN

Crochet Instructions

crochet the following pieces:

1 x Body in gold yarn
1 x Tail in gold yarn
2 x Legs in gold yarn

Head

Make 1 using gold yarn
Round 1: ch6, 4sc, 3sc into the next ch, 3sc, inc (12)
Round 2: inc, 3sc, 3inc, 3sc, 2inc (18)
Round 3-7: 18sc (18)
Round 8: 2sc, 2hdc, 2hdcinc, 3hdc, 10sc (19)
Round 9: inc, sc, 6inc, 11sc (26)
Round 10: 1sc, inc, 5sc, 6inc, 4sc, inc, 8sc (34)
Round 11: sc, inc, 23sc, inc, 8sc (36)
Round 12-16: 36sc (36)
Round 17: [2sc, dec, 2sc] x 6 (30)
Round 18: [3sc, dec] x 6 (24)
Round 19: [sc, dec, sc] x 6 (18)
Round 20: [sc, dec] x 6 (12)
Round 21: 6dec (6)
Slip stitch to finish off then using your yarn needle, thread the needle back and forth through the front loops and pull tight to close the hole. Push the needle through to the other side of the head and cut the yarn.
Sew this onto the top of the neck, making sure you put more of an angle on the muzzle pointing down than the charizard pattern (who has the snout sticking straight out). Embroider on two slits for the nostrils using the black embroidery thread.

Horn

Make 1 using gold yarn and the 2mm hook
Round 1: 4sc in a magic circle (4)
Round 2: [1sc, inc] x 2 (6)
Round 3: [1sc, inc] x 3 (9)
Slip stitch to finish it off and leave a tail to sew the horn to the head.
I sewed the horn about 3 rows up from the finished end of the head.

Feet

Repeat the following process for Toes and Foot twice, using gold and white yarn with both crochet hook sizes

Toes

Make 3 using white yarn (I used a cotton yarn that had a slightly smaller gauge just to keep the shape a bit neater with a sharper spike) and the 2mm hook
Round 1: 4sc in a magic circle (4)
Round 2: [1sc, inc] x 2 (6)
Round 3: [1sc, inc, 1sc] x 2 (8)
Round 4: 8sc (8)
Slip stitch to finish off and cut yarn for the first two toes leaving a small tail you can still sew a few stitches with. For the third toe, instead of slip stitch to finish off, change colour to gold yarn and change to the 3mm hook.

Foot continued from toe…

Using gold yarn
Round 5: 4sc into the third toe, 4sc into the second toe, 8sc all around the first toe, 4sc on the second toe, 4sc on the third toe (24)
Round 6: [1sc, dec, 1sc] x 6 (18)
Use the small tail ends from the toes to sew up the holes between each toe.
Round 7: [2sc, dec, 2sc] x 3 (15)
Round 8: 15sc (15)
Round 9: [3sc, dec] x 3 (12)
Round 10-11: 12sc (12)
Round 12: [1sc, dec, 1sc] x 3 (9)
Round 13-14: 9sc (9)
Stuff the foot a little.
Round 15: 1sc, 4dec (5)
Slip stitch to finish off and weave in and out of front loops and pull to close up the hole.
If using wire, thread some through the foot and up into the leg. Sew each foot to the leg. I put the heels quite far forward on my Dragonite to get the foot looking more different than Charizards.
Underbelly
Make 1 using cream yarn (note: this is not crocheted in the round and will be in rows)
Round 1: ch5, 4sc (4)
Round 2-3: ch1, turn, 4sc (4)
Round 4: ch1, turn, inc, 2sc, inc (6)
Round 5-8: ch1, turn, 6sc (6)
Round 9: ch1, inc, 4sc, inc (8)
Round 10: ch1, 8sc (8)
Round 11: ch1, turn, inc, 6sc, inc (10)
Round 12: ch1, turn, inc, 8sc, inc (12)
Round 13: ch1, turn, 12sc (12)
Round 14: ch1, turn, inc, 10sc, inc (14)
Round 15: ch1, turn, 14sc (14)
Round 16: ch1, turn, inc, 12sc, inc (16)
Round 17: ch1, turn, 16sc (16)
Round 18: ch1, turn, inc, 14sc, inc (18)
Round 19: ch1, turn, 18sc (18)
Round 20: ch1, turn, inc, 16sc, inc (20)
Round 21-27: ch1, turn, 20sc (20)
Round 28: ch1, turn, dec, 16sc, dec (18)
Round 29: ch1, turn, dec, 14sc, dec (16)
Round 30: ch1, turn, dec, 12sc, dec (14)
Round 31-39: ch1, turn, 14sc (14)
Round 40: ch1, turn, dec, 10sc, dec (12)
Round 41-43: ch1, turn, 12sc (12)
Round 44: ch1, turn, dec, 8sc, dec (10)
Round 45: ch1, turn, 14sc, dec, 14sc (9)
Round 46: ch1, turn, 9sc (9)
Round 47: ch1, turn, 14sc, dec, 3sc (8)
Round 48: ch1, turn, 8sc (8)
Round 49: ch1, turn, 3sc, dec, 3sc (7)
Round 50-52: ch1, turn, 7sc (7)
Round 53: ch1, turn, 3sc, dec, 2sc (6)
Round 54-56: ch1, turn, 6sc (6)
Round 57: ch1, turn, 2sc, dec, 2sc (5)
Round 58-61: ch1, turn, 5sc (5)
Round 62: ch1, turn, 2sc, dec, sc (4)
Round 63-67: ch1, turn, 4sc (4)
Round 68: ch1, turn, sc, dec, sc (3)
Round 69-71: ch1, turn, 3sc (3)
Round 72: ch1, turn, sc, dec (2)
Round 73: ch1, turn, 2sc (2)
Round 74: ch1, turn, dec (1)
Border: ch1, sc around the edge to make the border. Finish off.
Slip stitch to finish off and leave a long tail for sewing onto the body.
Sew this onto the body, making sure it goes all the way from up against the head to the end of the tail.
Embroider the stripes onto the underbelly, I spaced mine 3 rows apart.

Arms

Make 2 using gold yarn
Round 1: ch5, 3sc, 3sc into the same stitch, 2sc up the other side of the chain, inc (10)
Round 2: inc, 3sc, 2inc, 3sc, inc (14)
Round 3-4: 14sc (14)
Round 5: 5sc, dec, 5sc, dec (12)
Round 6: 12sc (12)
Round 7: 4sc, dec, 4sc, dec (10)
Round 8-15: 10sc (10)
We will now start working in rows
Round 16: 3sc, ss (4)
Round 17: turn, sc into last sc of the last round, 3sc, ss (5)
Round 18: turn, 3sc, ss (4)
Round 19: turn, sc into last sc of last round, 2sc
Finish off. Lightly stuff the arm.
Sew the arms to the body. I sewed mine about 6 rows down from the head.

Finger claws

Make 6 using white (smaller gauge) wool and the smaller 2mm crochet hook
Round 1: 4sc in a magic circle (4)
Round 2: [1sc, inc] x 2 (6)
Finish off and leave a small tail to sew to the arm. Sew three claws onto the starting end of each arm.

Antenna

I started by making the wire antenna to help me decide how long I wanted to have them (hopefully you have more luck deciding on your wire shape than I did so you wire isn’t as munched up as mine ). Make sure to bend the ends around so that they won’t poke through the crocheted parts. I also ended up painting my wire white so I couldn’t see the green of the wire through the embroidery thread.

Make 2 using cream embroidery thread and the smaller 2mm crochet hook
Round 1: 4sc in a magic circle (4)
Round 2-19: 4sc (4)
Slip stitch to finish off.

Thread the wire through the head and then thread each antenna onto the wire and sew onto the head. I have 3 rows between the top of the eyes and the antenna and 7 stitch holes between the two ends of wire.

Wings

Make 2 using green yarn and 2 using gold yarn (note: these will be crocheted in rows)
Round 1: ch2, 1sc in second chain from hook (1)
Round 2: ch1, turn, 3sc into the same stitch (3)
Round 3: ch1, turn, hdcinc, 2sc (4)
Round 4: ch1, turn, 2sc, inc, hdcinc (6)
Round 5: ch1, turn, hdcinc, inc, 4sc (8)
Round 6: ch1, turn, hdcinc, inc, 4sc, inc, hdcinc (12)
Round 7: ch1, turn, hdcinc, 9sc, inc, hdcinc, ch8 (23)
Round 8: turn, 20sc, inc, hdcinc (24)
Round 9-11: ch1, turn, 24sc (24)
Round 12: ch1, turn, 8sc, hdc, 2dc, 2trc, 2dc, hdc, 2sc, 6hdc (24)

Round 13: ch2, turn, 2dc, hdc, sc, ss (5)
Round 14: turn, ss into the sc from Round 13, sc, hdc, trc (4)
Finish off and weave in the end of the green wing, don’t finish off one of the gold wings.

Before you go any further, using the 6 inch tail on the green wings, sew on a middle support wire (making sure you have a left wing and a right wing and don’t accidentally sew the wire on the same side twice!). The charizard pattern has more photos and instructions on what this should look like.

Bend a wire to the same shape as the outline of your wing (all sides except bottom part), this will be stitched on when you join the two colours together and then stuck into the body to help hold up and shape the wings.

For the gold wing still on your hook, attach the start of the wire to the gold wing using a small dot of glue, align a green wing (wire side against the gold wing to hide it on the inside of the wing), and crochet around the edge of the wing. If you crochet with the green side of the wing facing you, the tidier crochet stitch will be facing the front of the dragonite (which I’m assuming will be the side visible more often).

For the other gold wing (the one finished off earlier, not on your hook), you will need to pull up some gold yarn again and stitch the remaining two wings together like you did before with the wire but to get the edge stitch looking the same on both wings, you will need to start from the inside bottom edge of the wing. Don’t forget to leave a long tail to sew the wing to the body when starting with the gold yarn.

Hopefully that all made sense and I didn’t make it too confusing

Sew the wings onto the back of the body. I sewed mine around 10 rows down from the top of the neck and had 2 stitch holes between where the wire for the two wings was inserted into the body.

Eyes

I feel like I cheated a bit here, but I traced the eyes onto a piece of paper from a picture of Dragonite then cut out all the pieces in black, white and brown (the proper eye colour is more of a green/grey, but I was in lockdown because of the C Who Cannot Be Named and had to do it with what I had at home). I needle felted them on, but you could use craft glue to do this or sew them on too.

The post Big Dragon Amigurumi Free Pattern appeared first on En.amigurumitariflerim.com.

MATERIALS: The toy requires 3.5 mm crochet, rope and wire. 

Abbrevations:  

Mr – magic ring  

CH – chain  

Sl St – slip stitch  

Sc – single crochet  

Inc – increase  

Dec – decrease  

PATTERN

Head and Body: 

We knit around the wire. 

ROW 1: Magic ring into 6 sc. 

ROW 2: 1 sc, 1 inc, 2 sc, 1 inc, 1 sc (8). 

ROW 3: 2 sc, 1 inc, 2 sc, 1 inc, 2 sc (10). 

ROW 4: 10 sc. 

ROW 5: 3 sc, 1 inc, 2 sc, 1 inc, 1 sc (12). 

ROW 6: 12sc. 

ROW 7: 2 sc, 1 inc, 2 sc, 1 inc, 2 sc, 1 inc, 3 sc (15). 

ROW 8-9: 15sc. 

ROW 10: 4 sc, 1 inc, 2 sc, 1 inc, 2 sc, 1 inc, 4 sc (18). 

ROW 11: 5 sc, 1 inc, 2 sc, 1 inc, 3 sc, 1 inc, 5 sc (21). 

ROW 12-14: 21 sc. 

ROW 15: 1 sc, 1 dec, 6 sc, 1 dec, 7 sc, 1 dec, 1 sc (18). 

ROW 16: 1 dec, 14 sc, 1 dec (16). 

ROW 17-18: 16 sc. 

ROW 19: 1 inc, 4 sc, 1 dec, 2 sc, 1 dec, 4 sc, 1 inc (16). 

ROW 20: 1 sc, 1 inc, 3 sc, 1 dec, 2 sc, 1 dec, 3 sc, 1 inc, 1 sc (16). 

ROW 21: 3 sc, 1 dec, 6 sc, 1 dec, 3 sc (14). 

ROW 22-53: 14 sc 

ROW 54: 3 sc, 1 inc, 6 sc, 1 inc, 3 sc (16). 

ROW 55-58: 16 sc 

ROW 59: 4 sc, 1 inc, 6 sc, 1 inc, 4 sc (18). 

ROW 60-81: 16 sc 

ROW 82: * 5 sc, 1 inc *. Repeat until the end of the row. (21). 

ROW 83-86: 21 sc. 

ROW 87: * 6 sc, 1 inc *. Repeat until the end of the row. (24). 

ROW 88-146: 24 sc 

ROW 147: * 6 sc, 1 dec *. Repeat until the end of the row. (21). 

ROW 148-156: 21 sc. 

ROW 157: * 5 sc, 1 dec *. Repeat until the end of the row. (18). 

ROW 158-173 (15 rows): 18 sc 

SEQ 174: * 4 sc, 1 dec *. Repeat until the end of the row. (15). 

ROW 175-182: (8 rows) 15 sc. 

ROW 183: * 3 sc, 1 dec *. Repeat until the end of the row. (12). 

ROW 184-196: (13 rows) 12 sc. 

ROW 197: * 4 sc, 1 dec *. Repeat until the end of the row. (10). 

ROW 198-202: (5 rows) 10 sc. 

ROW 203: * 3 sc, 1 dec *. Repeat until the end of the row. (8). 

ROW 204: * 2 sc, 1 dec *. Repeat until the end of the row .. (6) 

ROW 205-211: (7 rows) 6 sc. 

ROW 212: 2 sc, 1 dec, 2 sc (5). 

ROW 213-215: (3 rows) 5 sc. 

ROW 216: 2 sc, 1 dec, 1 sc. 

Finish. 

Navel Strip. 

-3 ch, turn around. 

– 2 sc, 1 ch, turn around. Repeat 34 times. 

-1 sc, 1 inc, 1 sc. 1 ch, turn around. 

-3 sc, 1 ch, turn around. Repeat 29 times. 

-1 sc, 1 inc, 2 sc. 1 ch, turn around. 

-4 sc, 1 ch, turn around. Repeat 39 times. 

-1 sc, 1 dec, 1 sc. 1 ch, turn around. 

-3 sc, 1 ch, turn around. 

-1 sc, 1 dec. 

Pull -1 ch and go 1 row sc to all sides. Finish. 

Front Legs. With pink thread. 

ROW 1: Magic ring into 6 sc. 

ROW 2-7: 1 sc in each loop. 

ROW 8 * 2 sc, 1 inc *. Repeat until the end of the row (8). 

Go on white rope. 

ROW 9-12: 1 sc in each loop. 

ROW 13: * 3 sc, 1 inc *. Repeat until the end of the row (10). 

ROW 14: One sc in each loop 

ROW 15: * 4 sc, 1 inc *. Repeat until the end of the row (12). 

ROW 16-20: 1 sc in each loop. Finish. 

Rear Legs. With pink thread. 

ROW 1: 1 Magic ring into 6 sc. 

ROW 2-8: (7 rows) 6 sc. 

ROW 9: * 2 sc, 1 inc *. Repeat until the end of the row (8). 

Go on white rope. 

ROW 10-15: 8 sc. 

ROW 16: * 3 sc, 1 inc *. Repeat until the end of the row (10). 

ROW 17: 10 sc. 

ROW 18: * 4 sc, 1 inc *. Repeat until the end of the row (12). 

ROW 19-22: 12 sc. 

ROW 23: * 5 sc, 1 inc *. Repeat until the end of the row (14). 

ROW 24-27: 14 sc. 

Finish. 

Put the strings coming out of the legs into the body first, then sew the legs. 

Twist the end of the wire to provide more support. 

Ears. 

ROW 1: 4 ch, turn. 

ROW 2: 1 sc, 1 hdc, 2 dc in end loops.  

Finish. 

Feet. 

ROW 1: 5 ch. 

ROW 2: 4 sl-st. 

ROW 3: 5 ch. 

ROW 4: 4 sl-st 

ROW 5: 5 ch. 

ROW 6: 4 sl-st. 

ROW 7: 4 ch. 

ROW 8: 3 sl-st. 

Finish. 

* Wrap 2-3 layers of thread around the wire to make horns and whiskers. 

* For the mane, pass the threads along the back and comb them with a comb. 

The post Haku Dragon Amigurumi Free Pattern appeared first on En.amigurumitariflerim.com.