MATERIALS:

Pecherka yarn “Children’s novelty” 100% acrylic;

hook 2.5; lining fabric;

lightning (about 50 cm);

elastic; needle; beads;

threads

holofiber.

ABBREVIATIONS:

ch – chain

sl-st – slip stitch

sc – single crochet

hdc – half double crochet

dc – double crochet

inc – increase – two sc in one loop

dec – decrease – two sc knitted together

Carapace

I knitted, joining the rows of sl-st and making ch for lifting, you can also knit in the usual spiral rows.

We start with purple, change the rainbow colors in three rows.

1 row: 6 sc into magic ring

2 row: inc * 6 (12)

3 row: (sc, inc) * 6 (18)

4 row: (2 sc, inc) * 6 (24)

5 row: (3 sc, inc) * 6 (30)

6 row: (4 sc, inc) * 6 (36)

7 row: (5 sc, inc) * 6 (42)

8 row: (6 sc, inc) * 6 (48)

And so on, observing the sequence of adding loops in rows (up to 21 rows).

21 row (red): (19 sc, inc) * 6 (126)

22-23 rows (black): no change (126)

24 row (gray): behind the rear wall of the loop 126 sc

25-27 rows: no change (126)

28 row: 1 ch lift, 21 sc (incomplete row), knit finish, leave the thread for sewing.

ABDOMEN

We knit, alternating gray and black spiral rows.

1 – 21 rows according to the description of the shell

22-23 rows: no change (126)

24 row: 1 ch lift, 21 sc (incomplete row), knit finish, leave thread for sewing

Connect the carapace and abdomen from the inside, knitting 21 sc of the last incomplete rows.

LINING

We measure the radius of a flat knitted circle and cut two circles of the corresponding diameter from thick cardboard.

From the fabric cut two circles, a larger diameter than cardboard circles. Align the line “forward needle” along the edge. On the

stick the edge of the cardboard circles double-sided tape, tighten the fabric around the cardboard, fasten.

LIGHTNING

Take a zipper and carefully sew it on a typewriter (or manually). Check if everything opens, closes.

Sew lining circles with a hidden seam. Do not forget to fill the upper and lower parts of the shell a little!

The inside is small. An ugly hole between the circles must be closed! Let’s get the chain ch

of the desired length, we knit 4 rows of sc and sew a jumper between the circles, as if connecting them.

CURVE CLIP

1 row: with a black thread, clinging to the front wall of 24 rows, knit a row sc (126)

2 row: in each loop of the previous row we knit 3 dc. Alternating rainbow colors through 18 loops (126: 7 = 18)

FRONT LEGS

1 row: 6 sc into magic ring

2 row: inc * 6 (12)

3 row: (sc, inc) * 6 (18)

4 row: (2 sc, inc) * 6 (24)

5 row: (3 sc, inc) * 6 (30)

6-7 rows: no change (30)

8 row: (3 sc, dec) * 3, 15 sc (27)

9 row: (2 sc, dec) * 3, 15 sc (24)

10 row: 6 dec, 12 sc (18)

11-12 rows: no change (18)

13 row: 8 hdc, 10 sc (18)

14 row: 8 sc, sl-st (incomplete row) knitting finish, leave the thread for sewing.

Stuff, sew along the edges of the zipper.

Hind legs

1 row: 6 sc into magic ring

2 row: inc * 6 (12)

3 row: (sc, inc) * 6 (18)

4 row: (2 sc, inc) * 6 (24)

5 row: (3 sc, inc) * 6 (30)

6 row: no change (30)

7 row: (3 sc, dec) * 6 (24)

8 row: (2 sc, dec) * 6 (18) knit finish, leave the thread for sewing.

Stuff, sew so that the turtle stays steady.

TAIL

1 row: 5 sc into magic ring

2 row: no change (5)

3 row: 3 inc, 2 sc (8)

4-5 rows: no change (8)

6 row: (inc, 3 sc) * 2 (10)

7 row: 10 sc, finish knitting, leave the thread for sewing. Do not stuff!

HEAD

1 row: 6 sc into magic ring

2 row: inc * 6 (12)

3 row: (sc, inc) * 6 (18)

4 row: (2 sc, inc) * 6 (24)

5 row: (3 sc, inc) * 6 (30)

6 row: (4 sc, inc) * 6 (36)

7 row: (5 sc, inc) * 6 (42)

8 row: (6 sc, inc) * 6 (48)

9-13 rows: no change (48)

14 row: (6 sc, dec) * 3, 24 sc (45)

15 row: (5 sc, dec) * 3, 24 sc (42)

16 row: (5 sc, dec) * 6 (36)

17 row: (sc, dec) * 6, 2 sc, 14 sl-st, 2 sc (30)

18 row: two hdc knit together * 6, 2 sc, 14 sl-st, 2 sc (24)

19 row: 10 hdc, sc, 12 sl-st, sc (24)

20 row: 10 hdc, sc, 6 dec for the front wall of the loop, sc (18), knit 1 sc to offset the row

21-23 rows: 10 hdc, 8 sc (18)

24 row: 6 hdc, sc, sl-st, finish knitting, leave the thread for sewing.

Stuff your head, draw a muzzle, sew it under the frill to the gray part of the shell. Head with several stitches

pull your head to the shell so that it is raised up.

BERET

We knit two rows of each color.

1 row (purple): 6 sc into magic ring.

2 row: inc * 6 (12)

3 row (blue): (sc, inc) * 6 (18)

4 row: (2 sc, inc) * 6 (24)

5 row (blue): (3 sc, inc) * 6 (30)

6 row (green): (4 sc, inc) * 6 (36)

7 row: (5 sc, inc) * 6 (42)

8 row (yellow): (6 sc, inc) * 6 (48)

9 row: (7 sc, inc) * 6 (54)

10 row (orange): (8 sc, inc) * 6 (60)

11 row: (9 sc, inc) * 6 (66)

12 row (red): behind the back wall 60 sc

13-14 rows: 60 sc

15 row (purple): (9 sc, dec) * 6 (60)

16 row: (blue): (8 sc, dec) * 6 (54)

17 row (blue): (7 sc, dec) * 6 (48)

18 row (green): (6 sc, dec) * 6 (42)

19 row (yellow): (5 sc, dec) * 6 (36)

20 row (orange): behind the front wall of the loop 36 sc

21-22 rows (red): no change (36), knit finish, remove the thread.

Cut black threads (hair), attach them, clinging to the wrong side of the 21 rows.

Here is the Turtle with a secret and is ready!

The post Amigurumi Rainbow Bob Marley Turtle Free Crochet Pattern appeared first on En.amigurumitariflerim.com.