Our step-by-step guide will walk you through the process of creating your very own rainbow dog companion. Whether you’re an experienced crocheter or a beginner, this pattern is designed to be accessible to all skill levels. With a rainbow of colors and a touch of imagination, you’ll soon have a charming amigurumi dog to call your own.

Not only is this project a joy to create, but it also makes for a fantastic gift for friends and family of all ages. Handcrafted with love, your rainbow dog amigurumi will carry a piece of your heart in every stitch.

So, gather your crochet hooks, your vibrant yarn, and let’s embark on this colorful journey together. Follow our amigurumi dog free pattern, and in no time, you’ll have a rainbow dog amigurumi that will bring a smile to your face and warmth to your heart. Get started today and watch the magic unfold!

Abbreviations:

• ch: Chain
• sc: Single Crochet
• hdc: Half Double Crochet
• dc: Double Crochet
• tr: Treble Crochet
• sl st: Slip Stitch

Increases:

• inc: Increase (usually 2 sc in the same stitch)
• 2inc: Double Increase (usually 2 sc in the same stitch)
• 3inc: Triple Increase (usually 3 sc in the same stitch)

Decreases:

• dec: Decrease (usually sc2tog – single crochet 2 together)
• invdec: Invisible Decrease (invisible single crochet decrease)
• hdc2tog: Half Double Crochet 2 Together
• dc2tog: Double Crochet 2 Together

Other Abbreviations:

• st: Stitch
• tog: Together
• rep: Repeat
• rnd: Round
• MR: Magic Ring (also known as Magic Circle)
• FO: Fasten Off
• BLO: Back Loop Only
• FLO: Front Loop Only

PATTERN

Upper Legs 

1 Row: 2 ch, in the 2nd ch from the hook, 6 sc. 

2 Row: 6 inc. = 12 

3-14 Rows: 12 

15 Row: 4 sc, dec, sc, dec = 10 

16-21 Rows: 10 

Tail 

1 Row: 2 ch, in the 2nd ch from the hook, 6 sc. 

2 Row: 6 inc. = 12 

3 Row: (1 sc, inc)*6 times = 18 

4 Row: 18 

5 Row: (1 sc, dec)*6 times = 12 

Body 

(Work from the bottom up) 

1 Row: 2 ch, in the 2nd ch from the hook, 8 sc. 

2 Row: 8 inc. = 16 

3-9 Rows: 16 

Make 2 pieces (lower legs), then connect. 

In the original version, when connecting, you get 31 sc, and there’s a hole between the lower legs that needs to be sewn… which I don’t really like. In my version, you get 32 sc. I’ll show you how I do it later in the photo. I’ve made a slight change to the pattern, and then follow the instructions from the video tutorial. 

10 Row: Connect the pieces as follows: 7 sc on the 1st leg, 16 sc on the 2nd leg, and 9 on the 1st leg. 

11-19 Rows: 32 

20 Row: (6 sc, dec)*4 times = 28 

21 Row: 28 

22 Row: (2 dc, dec)*7 times = 21 

23 Row: 21 

24 Row: (1 dc, dec)*7 times = 14 

25,26 Rows: 14 

In the original version, it’s like this: 

10 Row: Connect the pieces: 7 sc on the 1st leg, 15 sc on the 2nd leg, and 9 on the 1st leg. 

11-19 Rows: 31 

20 Row: (3 sc, dec)*6 times, 1 sc = 25 

21 Row: 25 

22 Row: (2 dc, dec)*6 times, 1 sc = 19 

23 Row: 19 

24 Row: (1 dc, dec)*6 times, 1 sc = 13 

25,26 Rows: 13 

Head 

I crocheted it from the 20th stitch in reverse order. 

1-12 Rows: 54 ch, 54 sc in the chain of ch. 

13 Row: (6 sc, dec)*6 times = 48 

14 Row: 48 

15 Row: (5 sc, dec)*6 times = 42 

16 Row: 42 

17 Row: (4 sc, dec)*7 times = 35 

18 Row: (3 sc, dec)*7 times = 28 

19 Row: (2 sc, dec)*7 times = 21 

20 Row: (1 sc, dec)*7 times = 14 

21 Row: 7 dec = 7 

Ears 

1 Row: 2 ch, in the 2nd ch from the hook, 6 sc. 

2 Row: 6 inc. = 12 

3 Row: (1 sc, inc)*6 = 18 

4 Row: (2 sc, inc)*6 = 24 

5-7 Rows: 24 

8 Row: (2 sc, dec)*6 = 18 

9-11 Rows: 18 

12 Row: (1 sc, dec)*6 = 12 

13-23 Rows: 12 

Nose 

1 Row: 2 ch, in the 2nd ch from the hook, 7 sc. 

2 Row: 7 inc. = 14 

3 Row: (1 sc, inc)*7 = 21 

4,5 Rows: 21 

6 Row: (1 sc, dec)*7 = 14 

Patch on the Eye 

Work in rounds. 

5 ch, starting from the 2nd ch from the hook, work 4 sc, 

3 ch as a turning chain, 3 dc in the 5th ch of the chain, 1 sc in each of the next 4, 3 ch of the chain, 5 dc in the 2nd ch, 

1 sc in the base of the next three sc, 2 dc in the base of the 4th sc, 

then 2 sc in the base of each dc. 

The post Rainbow Dog Amigurumi Free Pattern: Create Your Own Colorful Companion! appeared first on En.amigurumitariflerim.com.

Materials:

– Yarn for toys beige, brown, pink, black, yellow, blue, green, white

colors. I used Vita Brilliant beige, blue and green (45% wool, 55% acrylic, 380

m / 100 g), Trinity Dream yellow, pink, brown and black colors (70% wool, 30%

bamboo, 180 m / 50 g).

– Yarn for the eyes of white, black, green colors. I used iris kirovsky.

– Hooks that fit your yarn.

– Thick cardboard for insoles in shoes. Or any other dense material.

– Wire, in case you will make a toy on the frame. It took me 80 centimeters.

When using yarn with the specified footage, the height of the toy is about 20 cm.

Abbreviations:

– sc – single crochet;

– dec – decrease;

– inc – increase;

– sl-st – connecting column;

– dc – column with 1 yarn;

– hdc – half crochet;

– ch is the air loop.

The toy is knitted in a spiral (except ears, bangs and a speck on the eye). When using a marker

while knitting, his position is not necessary to monitor. It is only needed into magic ring.

the beginning of the row.

PATTERN

Head

Knit beige yarn

1 6 sc into magic ring 6

2 6 inc 12

3 (1 sc, inc) * 6 18

4 (2 sc, inc) * 6 24

5 (3 sc, inc) * 6 30

6 (4 sc, inc) * 6 36

7 (5 sc, inc) * 6 42

8 (6 sc, inc) * 6 48

9-16 48 sc (8 rows) 48

17 17 sc, 2 dec, 6 sc, 2 dec, 17 sc

We put a marker on the place of the decreases. There will be eyes. 44

18-20 44 sc (3 rows) 44

21 20 sc, 4 inc, 20 sc

In this row at the site of increases will be located

upper spout 48

22 8 sc, inc, (3 sc, inc) * 2, 14 sc, inc, (3 sc, inc) * 2, 8 sc 54

23 8 sc, inc, (4 sc, inc) * 2, 16 sc, inc, (4 sc, inc) * 2, 8 sc 60

24-25 60 sc (2 rows) 60

26 13 sc, dec, 4 sc, dec, 6 sc, dec, 2 sc, dec, 6 sc, dec, 4 sc, dec, 13 sc 54

27 12 sc, dec, 4 sc, dec, 5 sc, 2 dec, 5 sc, dec, 4 sc, dec, 12 sc 48

28 (6 sc, dec) * 6 42

29 42sc 42

30 (5 sc, dec) * 6 36

31 (4 sc, dec) * 6 30

32 (3 sc, dec) * 6 24

33 (4 sc, dec) * 4 20

34-35 20 sc (2 rows) 20

36 20 sc 20

We make the necessary number of ps (I got 3) so that the beginning of the row moves to the middle

back of the head. You may find that the offset loops are not needed, or

will have to dissolve a couple of columns.

For a more even transition of the color of the offset loop, it is better to do not sc, but sl-st.

Stuff your head with filler.

Start knitting the torso

37 change to black thread 20 sc 20

38 20 sc, 2 sl-st 20

39 Change to the yellow thread (4 sc, inc) * 4 24

40 (1 sc, inc) * 12 36

41 (5 sc, inc) * 6 42

42-57 42 sc (16 rows) 42

58 42 sc for front half loops 42

59 42 sc, sl-st, thread cut, hide 42

Knit panties

60 We knit blue thread for the back half loops 58 rows 42 sc 42

61-65 42 sc (5 rows) 42

Now fold the knitting in half so that the area of ​​the face is in front.

The beginning of the next row should be in the middle of knitting. For this we do the necessary

the number of displacement loops, or dissolve a few columns (I needed 3 ps).

Insert the wire frame. Take a piece of wire, fold it in half and attach

shape as in the photo. If necessary, wrap the wire with adhesive tape or

molar tape.

The length of the wire is taken taking into account the length of the toy + a certain amount per foot. I have

the wire length was approximately 45 cm.

We stuff the carcass.

Next we will knit legs.

Remember to stuff the carcass as you knit.

Do not break the thread. Count back 21 loops. In the 21st loop we introduce a hook.

66 21 sc 21

67 (5 sc, dec) * 3 18

68-75 18 sc (8 rows) 18

76 We knit for the front half-loops (2 sc, inc) * 6 24

77 (3 sc, inc) * 6 30

78 30 sc, thread cut, hide 30

To tie the second leg, repeat from 66 to 78 rows.

After the pants are connected, we close the hole between the legs with the help of a thread with

a needle.

Boots 2 pcs.

We start with the sole, knit with white yarn.

1 Type 10 ch, then knit in a circle starting from

second from the hook loop.

8 sc, 3 sc in 1, 7 sc, 2 sc in 1 20

2 inc, 7 sc, 3 inc, 7 sc, 2 inc 26

3 1 sc, inc, 7 sc, (1 sc, inc) * 3, 7 sc, (1sc, inc) * 2

Cut out the insoles from cardboard under your sole.

Paste it at your convenience. I am this

did when the boot was fully tied. 32

4 For the rear half loops 8 sc, 3 hdc, 9 dc, 3 hdc, 9 sc 32

5 Change the thread to green. 7 sc, 4 hdc, 2 dec of dc, 1 dc, 2 dec of dc, 4 hdc, 8 sc 28

6 28 sc 28

7 9 sc, 4 dec, 11 sc 24

8 5 sc, (1 sc, dec) * 4, 7 sc 20

9 8 sc, 2 dec, 8 sc 18

10 18 sc, cut the thread, leave the tail for sewing, fill with filler 18

Now you need to attach the shoes to the body with a needle and left

the tip of the thread on the boot.

First you need to twist the wire in the shape of the insole.

It is more convenient to insert shoes and sew on one at a time.

Sew on, grabbing the boot loops and back half loops in the 76th row of legs.

Pens are available in two versions. The first option fits in two parts and is suitable for

frame toys, the second option is knitted as a single part and the handles can be attached to the body

thread mount. The second option is provided by Lena.

First option

Start knitting with beige yarn from your fingers. Necessary

tie 4 fingers.

1 5 sc into magic ring 5

2-3 5 sc (2 rows) 5

After the last finger is tied, the thread is not cut.

We knit in a circle, tying fingers to each other and

forming a pen. We connect three fingers, then we knit

fourth. For the right and left hand, we knit rows 6 and 7 along

in different ways.

4 2 sc of the first finger, 2 sc of the second finger, 4 sc of the third finger, 2 sc of the second

finger 2 sc of the first finger. 12

5 12 sc 12

For the right handle

6 3 sc, 2 sc knitting a finger from the inside and the handle together, 7 sc 12

7 3 sc, 3 sc fingers, 7 sc 13

8 11 sc, dec 12

For the left handle

6 * 7 sc, 2 sc knitting a finger from the inside and the handle together, 3 sc 12

7 * 7 sc, 3 sc fingers, 3 sc 13

8 11 sc, dec 12

Change the thread to black.

9-18 12 sc (10 rows) 12

Cut the thread, hide

We knit the sleeves with yellow thread.

1 12 ch short to the ring, 12 sc 12

2-6 12 sc (5 rows) 12

7 Connect the sleeve to the rest of the hand. 12 sc capturing the front half loops already

bound hands. 12

8 (2 sc, inc) * 4, sl-st, thread cut and hide 16

With a black thread in the first row of the yellow part of the sleeve, we knit the connecting posts, the thread

cut, leave the tip for sewing.

We make a wire frame. On the one hand we bend the wire and, if necessary

wrap with adhesive tape. We insert it and fill the handle with filler.

If it is more convenient for you to knit and stuff right away, then the frame must be made before knitting the handles.

It’s more convenient for me to fill the part after inserting the frame. For this I use tweezers.

Sew handles to the body.

To make the wire easier to enter the body, you can pierce through the needle

body in the place where the handles should be.

The second option.

This version of the handle fits with the formation of the elbow. To the 16th row we knit in the same way as in the first

option. Starting from the 16th row, we knit according to the following description:

Right knob

16 4 hdc, 8 sc for rear half loops 12

17 4 hdc, 1 sc, 5 sc for the front half loops 15 rows, 2sc 12

18 12 sc 12

19 12 sc, 4 ch, change the thread to yellow 12

20 (1 sc, inc) * 6 18

21 18 sc for rear half loops 18

22-23 18 sc 18

24 (1 sc, dec) * 6, fill with filler 12

25 6 dec 6

Pull the hole, hide the thread.

Attach the thread to the front half loops of the 20 row, knit 18 sc,

fasten the thread, hide the tip.

Left pen

16 2 sc, 4 hdc, 6 sc for rear half loops 12

17 2 sc, 4 hdc, 1 sc, 5 sc for front half loops 15 rows 12

18 12 sc 12

19 12 sc, 3 ch, change the thread to yellow 12

20 (1 sc, inc) * 6 18

21 18 sc for rear half loops 18

22-23 18 sc 18

24 (1 sc, dec) * 6, fill with filler 12

25 6 dec 6

Pull the hole, hide the thread.

Attach the thread to the front half loops of the 20th row, knit 18 sc, fasten the thread, tip

hide.

We attach the handles to the body.

The ears

It is necessary to link 4 parts. First we knit 2 pink details, then brown.

1 7 ch, starting from the second loop from the hook 6 sc, ch, turn knitting 6

2 inc, 4 sc, inc, ch, turn 8

3 8 sc, ch, turn 8

4 inc, 6 sc, inc, ch, turn 10

5 inc, 8 sc, inc, ch, turn 12

6-8 12 sc, ch, turn (3 rows) 12

9 dec, 8 sc, dec, ch, turn 10

10 10 sc, ch, turn 10

11 dec, 6 sc, dec, ch, turn 8

12 8 sc, ch, turn 8

13 dec, 4 sc, dec, ch, turn 6

14 6 sc, ch, turn 6

15 dec, 2 sc, dec, ch, turn 4

16 4 sc, ch, turn 4

17 2 dec, ch, turn 2

18 dec 1

After the brown part is tied, the thread is not cut. Knit in a circle, connecting pink

and brown details. 18 sc on the side, 6 sc on the bottom, 18 sc on the side, sl-st.

You can insert a wire frame in the ear if you want the ear to

keep fit. It is advisable to choose a thinner wire.

Bang. 3 different sized parts.

1 item

1 Knit beige thread in a circle. We dial 13 ch. We knit from the second from the hook loop 3 sc, 3

hdc, 2 dc, 3 hdc, 3 sc in 1 loop, 10 sc, 2 sc in the last loop, sl-st. We cut the thread

leaving the tip for sewing

2 Knit with a brown thread. We start with the first hdc of the previous row. 6 sl-st, 3 sc, (hdc, dc,

ch, dc, hdc) in one loop, 3 sc, 5 sl-st, cut the thread, hide it.

2 detail

1 Knit beige thread in a circle. We dial 12 ch. We knit from the second from the hook loop 3 sc, 2

hdc, 2 dc, 2 hdc, sc, 3 sc in 1 loop, 9 sc, 2 sc in the last loop, sl-st. We cut the thread

leaving the tip for sewing

2 Knit with a brown thread. We start with the second hdc of the previous row. 4 sl-st, 3 sc, (hdc, dc,

ch, dc, hdc) in one loop, 3 sc, 3 sl-st, cut the thread, hide it.

3 detail

1 Knit beige thread in a circle. We dial 11 ch. We knit from the second from the hook loop 2 sc, 2

hdc, 2 dc, 2 hdc, sc, 3 sc in 1 loop, 8 sc, 2 sc in the last loop, sl-st. We cut the thread

leaving the tip for sewing

2 Knit with a brown thread. We start from the first dc of the previous row. 4 sl-st, 2 sc, (hdc, dc,

ch, dc, hdc) in one loop, 2 sc, 3 sl-st, cut the thread, hide it.

A schematic representation of the first part is shown below.

Eyes

First we knit the brown part. Speck. 1 item.

1 Dial 4 ch. Starting from the second loop hook inc, 1 sc, inc. 5

2-7 5 sc, 1 ch lift, turn 5

8 Now we bind on the sides and top. 1 ch lift, on the side 6 sc; by

top of inc, 1 sc, inc; on the side 4 sc, 1 hdc, 1 dc, 1 half-column with

2 crochets. Cut the thread, leave the tip for sewing.

Now we knit a thinner thread. I have this iris. We need green, white and black

colors.

You can also use ready-made eyes, or make them from felt. As you wish.

White color 2 details

1 6 sc into magic ring 6

2 6 inc 12

3 (1 sc, inc) * 4, 2 sc, cut the thread, leave the tip for sewing.

Green color 2 details

1 10 sc into magic ring 10

Black color 2 details

1 6 sc into magic ring 6

Now you need to connect all parts of the eyes together. First we sew the black part to

green. Then green detail to white. It should be noted that we connect the green part to the white

not in the center, but on the side. Then a couple of stitches with white thread make a highlight on the eye.

You can also make a small contour around the white part with a brown thread.

Next, sew a speck. Then we sew the eyes. I don’t sew eyes, but stick them.

We embroider the eyebrows. Sew on ears, bangs. Embroider the nose. For nose it is advisable to take yarn

thicker. So the nose will be more voluminous. We embroider a mouth. We embroider a pattern on a sweater.

Our Friend is ready!)

The post Dog Barboskin Amigurumi Free Pattern appeared first on En.amigurumitariflerim.com.

You can find all free patterns amigurumi crochet toys on our website. 

Materials 

Gazzal Baby Cotton XL hand knitting ropes;  

White (3432XL) color rope  

Brown (3436XL) color rope  

Navy Blue (3438XL) color rope  

Light Brown (3434XL) color rope  

Red (3439XL) color rope  

Black (3433XL) color rope 

3 mm crochet 

Fiber 

Scissors 

10 mm safety eye 

Needle for sewing 

Abbreviations 

Mr = Magic ring 

sc = single crochet 

inc = Increase 

dec = decrease 

sl-st = slip-stitch 

dc =double crochet 

Pattern

Head 

Weave with light brown color rope. 

1) Magic ring into 6sc 

2) 6inc (12sc) 

3) (1sc, 1inc) * 6 (18sc) 

4) (2sc, 1inc) * 6 (24sc) 

5) (3sc, 1inc) * 6 (30sc) 

6) (4sc, 1inc) * 6 (36sc) 

7) (5sc, 1inc) * 6 (42sc) 

8) (6sc, 1inc) * 6 (48sc) 

9) (7sc, 1inc) * 6 (54sc) 

10-16) 54sc 

14-15. 10x between the rows of eyes to wear. 

17) (8sc, 1inc) * 6 (60sc) 

18) (9sc, 1inc) * 6 (66sc) 

19) (10sc, 1inc) * 6 (72sc) 

20-22) 72sc 

23) (10sc, 1dec) * 6 (66sc) 

24) (9sc, 1dec) * 6 (60sc) 

25) (8sc, 1dec) * 6 (54sc) 

26) (7sc, 1dec) * 6 (48sc) 

27) (6sc, 1dec) * 6 (42sc) 

28) (5sc, 1dec) * 6 (36sc) 

29) (4sc, 1dec) * 6 (30sc) 

30) (3sc, 1dec) * 6 (24sc) 

31) (2sc, 1dec) * 6 (18sc) 

32) (1sc, 1dec) * 6 (12sc) 

33) 6dec (6sc) 

MOUTH 

1) Magic ring into 6sc = (6sc) 

2) 6inc = 12sc 

3) (1sc1inc) * 6 = (18sc) 

4) (2sc1inc) * 6 = (24sc) 

5) (3sc1inc) * 6 = (30sc) 

6-7) (30sc) 

Leave the rope to sew, 

lightly fill with fiber. 

Handles (2 Pieces) 

Weave with light brown color rope. 

1) Magic ring into 6sc 

2) 6inc (12sc) 

3) (1sc, 1inc) * 6 (18sc) 

4-6) 18sc 

7) 3dec, 12sc (15sc) 

8) 2dec, 11sc (13sc) 

9) 1dec, 11sc (12sc) 

10-32) 12sc 

33) We take single crochet and close them 6sc. 

Shoes and Legs (2 Pcs) 

Weave with brown color rope. 

1) 8 chains, starting from chain 2, 6sc, 3sc, 5sc, 1inc (16sc) to the same frequent needle 

2) 1inc, 4sc, (inc) * 5, 4sc, (inc) * 2 (24sc) 

3) 7sc, (inc) * 10, 7sc (34sc) 

Weave white color with rope. 

4) 7sc, 20hdc, 7sc (34) as Blo 

Navy blue color weave with rope. 

5) 7sc, 20hdc, 7sc (34) 

6) 34sc 

7) 9sc, 8dec, 9sc (26sc) 

8) 7sc, 6dec, 7sc (20sc) 

9) 6sc, 4dec, 6sc (16sc) 

Weave white color with rope. 

10) as Blo (6sc, 1dec) * 2 (14sc) 

Weave with light brown color rope. 

11) Flo as 14sc 

12) 4sc, 1inc, 2sc, 1inc, 3sc, 1inc, 1sc, 1inc (18sc) 

13-21) 18sc 

22) Flo as 18sc 

23) 18sc to Blo part of the 22nd row 

24-34) 18sc 

Body 

Weave with light brown color rope. 

We pull the rope of the first leg and pull the rope of the second leg without pulling 3ch. 

1) First leg 18sc, 3ch, second leg 18sc, 3ch (42sc) 

2-3) 42sc 

4) 8sc, 2inc, 19sc, 2inc, 11sc (46sc) 

5-8) 46sc 

9) 10sc, 1dec, 20sc, 1dec, 11sc (44sc) 

10) 44sc 

11) 9sc, 1dec, 20sc, 1dec, 11sc (42sc) 

12-13) 42sc 

14) 6sc, 2dec, 18sc, 2dec, 10sc (38sc) 

15) 38sc 

16) 9sc, 1dec, 13sc, 1dec, 12sc (36sc) 

17-21) 36sc 

22) 8sc, 1dec, 17sc, 1dec, 7sc (34sc) 

23) 34sc 

24) 9sc, 1dec, 14sc, 1dec, 7sc (32sc) 

25) 32sc 

26) 8sc, 1dec, 14sc, 1dec, 6sc (30sc) 

27) (3sc, 1dec) * 6 (24sc) 

28) (2sc, 1dec) * 6 (18sc) 

29) (1sc, 1dec) * 6 (12sc) 

30-31) 12sc 

Ears (2 Pieces) 

Weave with light brown color rope. 

1) Magic ring into 6sc 

2) 6inc (12sc) 

3) (1sc, 1inc) * 6 (18sc) 

4) (2sc, 1inc) * 6 (24sc) 

5) (3sc, 1inc) * 6 (30sc) 

6) (4sc, 1inc) * 6 (36sc) 

7-15) 36sc 

16) (4sc, 1dec) * 6 (30sc) 

17-19) 30sc 

20) (3sc, 1dec) * 6 (24sc) 

21-27) 24sc 

7-8 from the top of the head, closing the ears with each other 12sc. sewing between rows. 

Shorts 

Red weave with color rope. 

1) Combine with 28ch, sl-st. 

2-3) 28sc 

Weave white color with rope. 

4) 28sc 

Red weave with color rope. 

5-8) 28sc 

We connect the second part with the first part without pulling the chain. 

9) First part 28sc, second part 28sc (56sc) 

10) 12sc, 1dec, 26sc, 1dec, 14sc (54sc) 

11) 9sc, 2dec, 13sc, 1dec, 10sc, 2dec, 12sc (49sc) 

12-14) 49sc 

15) 11sc, 1dec, 23sc, 1dec, 11sc (47sc) 

16-17) 47sc 

T-shirt 

Weave white color with rope. 

1) 25ch 

2) 24sc 

Red weave with color rope. 

3) (3sc, 1inc) * 6 (30sc) 

4) (4sc, 1inc) * 6 (36sc) 

5) (5sc, 1inc) * 6 (42sc) 

6) (6sc, 1inc) * 6 (48sc) 

7-10) 48sc 

11) Skip 6sc, 8ch, 12 single crochet, Skip 12sc, 8ch, 12 single crochet, 6sc 

12) (2sc, 1inc) * 2, 8sc on the chain, (2sc, 1inc) * 4, 8sc on the chain, (2sc, 1inc) * 2 (48sc) 

13-23) 48sc 

Weave white color with rope. 

24) 48sc 

Red weave with color rope. 

25-26) 48sc 

We dress up the T-shirt without sewing it, and then we sew it. 

Ball 

Weave white color with rope. 

1) Magic ring into 6sc 

2) 6inc (12sc) 

3) (1sc, 1inc) * 6 (18sc) 

4) (2sc, 1inc) * 6 (24sc) 

5) (3sc, 1inc) * 6 (30sc) 

6) (4sc, 1inc) * 6 (36sc) 

7-12) 36sc 

13) (4sc, 1dec) * 6 (30sc) 

14) (3sc, 1dec) * 6 (24sc) 

15) (2sc, 1dec) * 6 (18sc) 

16) (1sc, 1dec) * 6 (12sc) 

17) 6dec (6sc) 

Black Parts 

1) Magic ring into 5sc 

2) 5inc (10sc) 

3) (1sc, 1inc) * 5 (15sc) 

We leave rope to sew. 

Footballer dog Lucky ready! 

The post Football Player Dog Amigurumi Free Pattern appeared first on En.amigurumitariflerim.com.

Attention!

All parts of this toy are spiraled unless otherwise noted.

Use a marker or contrasting thread to keep track of where the new row starts.

The new row must end in front of the loop into which the marker is inserted.

If in the process of knitting the marker line has shifted to the right, then at the end of the row, knit an additional loop.

That is, if you notice that the marker has begun to deviate to the right, at the end of the row you need to knit one additional column and move the marker by one loop (now the “second” loop of the row will become the first).

This is called a “displacement loop” and is not included in the description.

ABBREVATİONS  

SC – single crochet   

Ch – chain   

inc – increase (make 2 sc from one)    

dec – decrease (2 sc to one)    

dbl.inc – double increase (make 3 sc from one)    

dbl.dec – double decrease (3 sc to one) 

MATERIALS 

Hook 1.5mm Clover (or other suitable size for the selected yarn) 

Variants of yarn used in this master class: 

Yarn Tender Mohair – 44g – 2 skeins (yarn length 175m / 25g; composition; 40% mohair, 60% acrylic.) 

+ additional thread KID ROYAL – less skein (500m / 50g; 62% kid mohair, 38% polyamide) 

Angora Real 40 Alize – Almost a skein (length 480m / 100g; composition: 40% wool, 60% acrylic) 

+ additional thread KID ROYAL – less skein (500m / 50g; 62% kid mohair, 38% polyamide) 

Holofiber filler 

Finished eyes (diameter depends on the size of the toy) 

Copper wire (200cm) І section 2.5 mm and 1.5 mm 

Long tightening needle. 

Strong thread (for tightening) 

Rolled adhesive plaster 

Toning alu o u means 

Instant glue gel. 

PATTERN

Ears (2 parts) 

The marker runs along the side of the ear. 

1st row: 6SC INTO MAGIC RING 

2nd row: 6inc = 12 

3 row: (1 sc, inc) * 6p = 18sc 

4th row: (2sc, inc) * 6p = 24sc 

5 row: hsc, (7sc, inc) * 3 = 27sc 

6 row: hsc, (8sc, inc) * 3 = 30sc 

7 row: hsc, (9sc, inc) * 3 = 33sc 

8-12 rows: 33sc (5 rows) 

13 row: dec, 31sc = 32sc 

14 row: (dec, 14sc) * 2 = З0sc 

15 row: 30sc 

16 row: (dec, 13sc) * 2 = 28sc 

17 row: 28sc 

18th row: (dec, 12sc) * 2 = 26sc 

Row 19: 26sc 

20 row: (dec, 11sc) * 2 = 24sc 

Rows 21-22: 24sc 

23 row: (dec, 10sc) * 2 = 22sc 

24-25 rows: 22sc 

26 row: (dec, 9sc) * 2 = 20sc 

27 row: 20sc 

28 row: (dec, 8sc) * 2 = 18sc 

Rows 29-30: 18sc 

Insert the wire into the ears. 

31 row: (dec, 7sc) * 2 = 16sc 

32 row: 16sc 

33 row: (dec, 6sc) * 2 = 14sc 

Rows 34-37: 14sc (4 rows) 

Cut the thread, fasten. 

TAIL 

Do not follow the marker. 

1st row: 6SC INTO MAGIC RING 

2-3 rows: 6sc 

4th row: (2sc, inc) * 2p = 8sc 

Rows 5-9: 8sc (5 rows) 

10 row: (Зsc, inc) * 2p = 10sc 

11-16 rows: 10sc (6 rows) 

17th row: (4sc, inc) * 2p = 12sc 

Rows 18-27: 12sc (10 rows) 

Cut the thread, fasten. Do not fill. 

UPPER FEET 

Fingers 8pcs, 4 for each paw. 

Thumb – 2 pcs. 

1st row: 6SC INTO MAGIC RING 

2nd row: (1sc, inc) * 3 = 9sc 

3 row: 9sc 

4th row: dec, 7sc = 8sc 

5 row: dec, 6sc = 7sc 

6 row: dec, 5sc = 6sc, Sl-st. 

Cut the thread, fasten. Do not fill. 

Fingers – 6 pieces 

1) row: 6sc into magic ring 

2) row: (1sc, 1inc) * 3 = 9sc 

3) row: 9sc 

4) row: dec, 7sc = 8sc 

5) row: dec, 6sc = 7sc 

6) row: dec, 5sc = 6sc 

7) row: 6sc 

Do not fill. 

do not cut the thread on the last finger, connect the parts and continue knitting the paw. 

RIGHT HAND 

The marker runs along the side of the handle, when deflected, knit an offset loop. 

Row 1: 3sc on 1st finger, 3sc on 2nd toe, 6sc on 3rd toe, 3sc 

2nd finger, 3sc 1st finger = 18sc 

2nd row: (2sc, inc) * 3, 9sc = 21sc 

Rows 3-5: 21 sc (3 rows) 

6 row: 18sc, 3sc on the finger and palm 

together (fold the details of the palm and finger right sides to each other and knit 3sc fingers and palms together (insert the hook from the wrong side of the finger) = 21sc 

7 row: 18sc, Зsc along the remaining loops of the finger = 21sc 

8 row: 21sc 

9th row: 1sc, (dec, 8sc) * 2p = 19sc 

Prepare the frame: take three pieces of wire with a cross section of 1.5 mm LONG POB cm each 

– for the first, third and thumb and one piece of wire with a cross section of 2.5 mm and a length of 20 cm 

– for the second finger. Insert the wire into the fingers, connect together and wrap with adhesive plaster. 

Add filler to the palm. 

Then continue knitting around the frame. Stuff elastic as you knit. 

10 row: dec, 6sc, dec, 9sc = 17sc 

11th row: 1sc, dec, 5sc, dec, 7sc = 15sc 

12-13 rows: 15sc 

14th row: 7sc, inc, 7sc = 16sc 

15 row: (inc, 7sc) * 2p = 18sc 

16-20 rows: 18sc (5 rows) 

21 row: (dec, 7sc) * 2p = 16sc 

22 row: 16 sc 

23 row: Зsc, 4inc, 9sc = 20sc Elbow 

Rows 24-26: 20sc (3 rows) 

27 row: Зsc, 4dec, 9sc = 16sc 

28 row: 3sc, 2dec, 9sc = 14sc 

29th row: (inc, 6sc) * 2p = 16sc 

30 row: (7sc, inc) * 2p = 18sc 

Row 31: 18sc 

32 row: 2sc, (inc, 7sc) * 2p = 20sc 

33-40 rows: 20sc (8 rows) 

41 row: (dec, 8sc) * 2p = 18sc 

Row 42: 18sc 

43 row: dec, 4sc, dec, 10sc = 16sc 

Put an additional marker in the 7th loop, and cut the thread, fasten. 

LEFT HAND 

The marker runs along the side of the handle, when deflected, knit an offset loop. 

1 row: 3sc on the 1st finger, 3sc on the 2nd finger, 6sc on the 3rd finger, 3sc Toreals on the 2nd finger, Зsc on the 1st finger = 18sc 

2nd row: 9sc, (inc, 2sc) * 3, = 21sc 

3-5 rows: 21sc (3 rows) 

6 row: Зsc on the finger and palm together (fold the details of the palm and finger 

right sides to each other and knit Зsc fingers and palms together (insert the hook from the wrong side of the finger), 18sc = 21sc 

7 row: Зsc along the remaining loops of the finger, 18sc = 21sc 

8 row: 21sc 

9th row: (8sc, dec) * 2p, 1sc = 19sc 

Insert the wire into the fingers, connect together and wrap with adhesive plaster. 

Add filler to the palm. 

Then continue knitting around the frame. 

Stuff elastic as you knit. 

10 row: 9sc, dec, 6sc, dec = 17sc 

11 row: 7sc, dec, 5sc, dec, 1sc = 15sc 

12-13 rows: 15sc 

14th row: 7sc, inc, 7sc = 16sc 

15 row: (7sc, inc) * 2p = 18sc 

16-20 rows: 18sc (5 rows) 

21 row: (7sc, dec) * 2p = 16sc 

22 row: 16 sc 

23 row: 9sc, 4inc, 3sc = 20sc Elbow 

Rows 24-26: 20sc (3 rows) 

27 row: 9sc, 4dec, Зsc = 16sc 

28 row: 9sc, 2dec, Зsc = 14sc 

29th row: (6sc, inc) * 2p = 16sc 

30 row: (inc, 7sc) * 2p = 18sc 

Row 31: 18sc 

32 row: (7sc, inc) * 2p, 2sc = 20sc 

33-40 rows: 20sc (8 rows) 

41 row: (dec, 8sc) * 2p = 180 

Row 42: 18sc 

43 row: dec, 4sc, dec, 10sc = 16sc 

Place an additional marker in the 7th loop. 

Cut the thread, fasten. 

LOWER FEET 

The marker passes from the side, in case of deviation – knit an offset loop. 

1st row: 8SC INTO MAGIC RING 

2nd row: 8inc = 16sc 

3rd row: (1sc, inc) * 8p = 24sc 

4th row: 24sc 

5 row: (3sc, inc) * 6p = 30sc 

6 row: (4sc, inc) * 6p = 36sc 

7-11 rows: 36sc (5 rows) 

In the 11th row, put additional markers in the 6th and 13th loops. 

12th row: (10sc, dec) * Зp = 33sc 

13 row: (dec, 9sc) * Зp = 30sc 

Row 14: 30sc 

15 row: (8sc, dec) * Зp = 27sc 

16 row: 27sc 

17th row: hsc, (dec, 7sc) * Зp = 24sc 

Rows 18-19: 24sc 

20 row: 12sc, dec, 2sc, 2dec, 2sc, dec = 20sc 

Rows 21-25: 20sc (5 rows) 

26 row: hsc, Зsc, 4ch, skip 4, 13sc = 20sc 

27 row: Зsc, 4sc in air loops, 5sc, dec, 4sc, dec = 18sc 

Row 28: 18sc Row 29: dec, 8sc, dec, 6sc = 16sc 

30 row: (2sc, dec) * 4p = 12sc 

Row 31: 12sc 

Potebrell Toe fill loosely. 

If you want the dog to stand confidently, prepare a wire frame. Take two pieces of wire with a cross section of 2.5 mm, 25 cm and 40-42 cm long. 

The length of the wire may vary, depending on the yarn you choose and the size of your toy. Make a loop, secure with adhesive plaster, insert the frame into the foot. 

Add filler to the stack. Continue knitting. 

Row 31: 6dec, sl-st 

Cut the thread, fasten, pull the remaining loops. Add the filling to the heel tightly. 

Dial 20sc on the foot, start from the heel side. The marker runs strictly in the center at the back, when it is deflected, knit offset loops. 

Then continue knitting around the frame. Stuff elastic as you knit. 

Rows 1-2: 20sc 

3rd row: 2sc, dec, 12sc, dec, 2sc = 18sc 

4th row: 18sc 

5 row: 2sc, inc, 12sc, inc, 2sc = 20sc 

6 row: 20sc 

7 row: 1sc, dec, 5sc, inc, 2sc, inc, 5sc, dec, 1sc = 20sc 

8 row: 20sc 

9 row: 1sc, dec, 5sc, inc, 2sc, inc, 5sc, dec, 1sc = 20sc 

10 row: 20sc 

11 row: dec, 6sc, inc, 2sc, inc, 6sc, dec = 20sc 

12 row: 20sc 

13 row: dec, 6sc, inc, 2sc, inc, 6sc, dec = 20sc 

14th row: 1sc, dec, 14sc, dec, 1sc = 18sc 

15 row: 1sc, dec, 4sc, inc, 2sc, inc, 4sc, dec, 1sc = 18sc 

16 row: 6sc, inc, 4sc, inc, 6sc = 20sc 

17th row: 8sc, 4inc, 8sc = 24sc knee 

Rows 18-19: 24sc 

20 row: 8sc, 4dec, 8sc = 20sc 

21 row: 1sc, inc, (4sc, dec) * 2p, 4sc, inc, 1sc = 20sc 

22 row: 1sc, inc, 5sc, dec, 2sc, dec, 5sc, inc, 1sc = 20sc 

23 row: 20sc 

24th row: (4sc, inc) * 4p = 24sc 

Rows 25-26: 24sc 

27 row: (5sc, inc) * 4p = 28sc 

Rows 28-29: 28sc 

30 row: (6sc, inc) * 4p = 32sc 

Rows 31-34: 32sc (4 rows) 

Cut the thread, fasten. 

Put additional markers in the 34th row: 

For the right leg in the 9th loop, for the left leg in the 30th loop. 

TRUNK 

The marker runs in the center of the back, when it is deflected, knit the offset loops. 

1st row: 6SC INTO MAGIC RING 

2nd row: 6inc = 12sc 

3 row: (1 sc, inc) * 6p = 18sc 

4th row: (2sc, inc) * 6p = 24sc 

5th row: 2sc, dbl.inc, 4sc, dbl.inc, 8sc, dbl.inc, 4sc, dbl.inc, 2sc = 32sc 

6 row: 4sc, 7sc 

along the left leg and trunk together (fold the details of the trunk and legs right sides to each other and knit 7sc 

legs and torso together, starting to tie from the 30th loop of the leg, marked with an additional marker (insert the hook from the wrong side of the leg), along the torso – 10sc 

7sc along the right leg and torso together (fold the details of the torso and legs right sides to each other and knit 7sc legs and torso together, starting to tie from the 9th loop of the leg, marked with uluuk / additional marker (insert the hook from the wrong side of the leg), along torso – 4sc = 32sc 

7 row: on the body – 4sc, 1sc in the loop of the previous row, 

on the leg – 1sc Into the loop of the previous row, 25sc, 1sc Into the loop of the previous row, 

along the body – 1sc in the loop of the previous row, 10sc, sc In the loop of the previous row. 

on the leg – 1sc Into the loop of the previous row, 25sc, 1sc Into the loop of the previous row, 

on the body – 1sc in the loop of the previous row, 4sc = 76sc Thus, in the 7th row, sc B was added due to tying 

loops of the previous row of 8 loops. 

8 row: (2sc, inc) * 2p, 26sc, inc, 10sc, inc, 26sc, (inc, 2sc) * 2p = 82sc 

Form a horizontal bar from the wire of the leg frames to the width of the body, twist the wire together, wrap it with adhesive plaster. Then continue knitting around the frame. 

9 row: 82sc 

10 row: 7sc, inc, 66sc, inc, 7sc = 84sc 

Rows 11-17: 84sc (7 rows) 

18th row: 2sc, dec, 6sc, dec, 60sc, dec, 6sc, dec, 2sc = 80sc 

19 row: 12sc, (dec, 16sc) * Zr, dec, 12sc = 76sc 

20 row: 6sc, dec, 5sc, dec, 46sc, dec, 5sc, dec, 6sc = 72sc 

21 row: 6sc, dec, 4sc, dec, 44sc, dec, 4sc, dec, 3sc, 3sc 

along the ponytail and torso together (fold the details of the torso and tail uur with the front sides to each other and tie Зsc of the tail and trunk together (insert the hook from the wrong side of the tail) = 68sc 

22 row: Зsc along the tail and trunk together, along the body at 62sc, Зsc along the remaining loops of the tail = 68sc 

Move the main marker here. 

23 row: 3sc along the remaining loops of the tail, along the body 65sc = 68sc 

24 row: 6sc, dec, 52sc, dec, dec, sc = 66sc 

25 row: 1sc, dec, 60sc, dec, 1sc = 64sc 

Rows 26-28: 64sc (3 rows) 

29th row: 5sc, dec, 12sc, dec, 22sc, dec, 12sc, dec, 5sc = 60sc 

30 row: 60sc 

31 row: 10sc, dec, 36sc, dec, 10sc = 58sc 

32 row: 6sc, dec, 42sc, dec, 6sc = 56sc 

33 row: 4sc, dec, 44sc, dec, 4sc = 54sc 

34 row: 11sc, dec, 28sc, dec, 11sc = 52sc 

35 row: 10sc, dec, 28sc, dec, 10sc = 50sc 

Insert the wire into the tail. Twist the tail frame and the torso frame together. Secure with adhesive plaster. Add loose filler to the tail. 

Fill the lower part of the body with filler elastic, but not stone. 

Adjust the shape of the buttocks. Spread out the filler with a needle. 

Continue knitting. 

Rows 36-39: 50sc (4 rows) 

40 row: 9sc, dec, 28sc, dec, 9sc = 48sc 

Rows 41-42: 48sc 

43 row: 12sc, dec, 20sc, dec, 12sc = 46sc 

Buttocks tightening 

It can also be done on a finished toy, but in an open body it is more convenient to evenly distribute the filler, emphasizing the knitted shapes. 

Withdraw the needle from the body to the first row of tail tying (leave the tip of the thread about 20 cm inside the body to fix the tightening with a knot). 

Then sew with a stitch in two rows, each time bring the needle into the body. First, in one direction from the beginning of tying the tail to the beginning of knitting of the body, while pulling up the working thread and pressing the 1st row with your fingers. 

Then sew the stitches in the opposite direction, bringing the needle out in exactly the same places, only pulling the thread through the unstitched areas. Do not forget to tighten the working thread after each stitch! 

The last stitch is in the first row of the tail tie. 

Fix the tightening with a knot. Cut the thread, hide it in the body. 

Rows 44-49: 46sc (6 rows) 

Elastic, but not stone, fill the body with filler. 

50 row: 8sc, 6sc on the left arm and trunk together (fold the details of the torso and arms right sides to each other and knit 6 sc KING of the arms and torso together, starting to tie from the 7th loop of the hand, 

marked with an additional marker (insert the hook from the wrong side of the hand), 

along the trunk – Зsc, dec, 8sc, dec, 3sc, 6sc along the right arm and torso together (fold the details of the torso and arms with the front sides to each other and tie 6sc of the arms and trunk together, starting to tie from the 15th loop of the arm, marked with an additional marker (insert the hook from the seamy side of the hand), along the body – 8sc = 44sc 

51 row: on the body 6sc, dec, 

on the remaining loops of the hand 10sc, 

on the torso 16sc 

on the remaining loops of the hand 10sc, 

torso dec, 6sc = 50sc 

Twist the wires of the main frame and arm frames together. Secure with adhesive plaster. Stuff the torso with filler as you knit. 

52 row: 7sc, dec, Зsc, dec, 22sc, dec, Зsc, dec, 7sc = 46sc 

Row 53: 46sc 

54 row: 7sc, (dec, 2sc) * 2p, dec, 12sc, (dec, 2sc) * 2p, dec, 7sc = 40sc 

55 row: 6sc, dec, 4sc, dec, 12sc, dec, 4sc, dec, 6sc = 36sc 

56 row: 1sc, dec, (3sc, dec) * 2p, 10sc, dec, (3sc, dec) * 2p, 1sc = 30sc 

57 row: 5sc, dec, 2sc, dec, 8sc, dec, 2sc, dec, 5sc = 26sc 

Rows 58-59: 26sc 

60 row: 5sc, dec, 12sc, dec, 5sc = 24sc 

Rows 61-64: 24sc (4 rows) 

65 row: 6sc, dec, 8sc, dec, 6sc = 22sc 

66 row: 6sc, dec, 8sc, dec, 6sc = 22sc 

67 row: 5sc, dec, 8sc, dec, 5sc = 20sc sl-st. 

Cut the thread, fasten. 

Leave the thread for sewing. 

Add filler to the neck. 

LOWER JAW 

Do not follow the marker. 

1st row: 6SC INTO MAGIC RING 

2nd row: 6inc = 12sc 

3 row: (1 sc, inc) * 6p = 18sc 

4th row: 18sc 

5 row: 1sc, (inc, 2sc) * 5p, inc, 1sc = 24sc 

6 row: 24sc 

7 row: 5sc, inc, 12sc, inc, 5sc = 26sc 

8 row: 1sc, dec, 4sc, inc, 10sc, inc, 4sc, dec, 1sc = 26sc 

9th row: 6sc, inc, 12sc, inc, 6sc = 28sc 

10 row: 1sc, dec, 5sc, inc, 10sc, inc, 5sc, dec, 1sc = 28sc 

11 row: 7sc, inc, 12sc, inc, 7sc = 30sc 

12 row: 1sc, dec, 5sc, inc, 12sc, inc, 5sc, dec, 1sc = 30sc 

13 row: 8sc, inc, 12sc, inc, 8sc = 32sc 

14th row: 8sc, dbl.inc, 14sc, dbl.inc, 8sc = 36sc 

15 row: 36sc 

16 row: 1sc, dec, 7sc, inc, 14sc, inc, 7sc, dec, 1sc = 36sc 

Place an additional marker in the 8th loop. Cut the thread, fasten. 

HEAD 

The marker runs in the center of the muzzle, when it is deflected, knit offset loops. 

1st row: 6SC INTO MAGIC RING 

2nd row: 6inc = 12sc 

3rd row: (1sc, inc) * 6p = 18sc 

4th row: (2sc, inc) * 6p = 24sc 

5 row: (3sc, inc) * 6p = 30sc 

6 row: 2sc, (inc, 4sc) * 5p, inc, 2sc = 36sc 

7 row: 12sc, (inc, 1sc) * 2p, inc, 2sc, inc, (1 sc, inc) * 2p, 12sc = 42sc 

8 row: 42sc 

9th row: 10sc, (inc, 3sc) * 2p, inc, 4sc, inc, (Зsc, inc) * 2p, 10sc = 48sc 

10 row: 48sc 

11 row: 1sc, inc, (5sc, inc) * 2p, 20sc, (inc, 5sc) * 2p, inc, 1sc = 54sc 

12-15 rows: 54sc (4 rows) 

16 row: 1sc, inc, 16sc, dec, 14sc, dec, 16sc, inc, 1sc = 54sc 

17 row: 54sc 

18 row: 1sc, inc, 2sc, dec, 42sc, dec, 2sc, inc, 1sc = 54sc 

19th row: 1sc, inc, 16sc, dec, 14sc, dec, 16sc, inc, 1sc = 54sc 

Row 20: 54sc 

21 row: 9sc, dec, 2sc, dec, 24sc, dec, 2sc, dec, 9sc = 50sc 

Row 22: 50sc 

23 row: (7sc, dec) * 2p, 14sc, (dec, 7sc) * 2p = 46sc 

24 row: 1sc, inc, (5sc, dec) * 2p, 14sc, (dec, 5sc) * 2p, inc, 1sc = 44sc 

Rows 25-26: 44sc 

27 row: 1sc, inc, 40sc, inc, 1sc = 46sc 

Row 28: 46sc 

29 row: 15sc, 16sc on the head and lower jaw together (fold the parts of the head and jaw with their front sides to each other and, starting from the 8th loop marked with an additional marker, knit 16sc of the jaw and head together (insert the hook from the wrong side of the jaw), 15sc = 46sc. 

30 row: on the head 1sc, inc, 13sc, 1sc in the loop of the previous row (in the corner), on the jaw 1sc In the loop of the previous row, 20sc, 1sc In the loop of the previous row, on the head 1sc in the loop of the previous row, 13sc, inc, 1sc = 56sc 

Rows 31-32: 56sc 

33 row: 10sc, (inc, 3sc) * Зр, 12sc, (3sc, inc) * Зp, 10sc = 62 

34 row: 1sc, inc, 58sc, inc, 1sc = 64 

35 row: 10sc, (inc, 4sc) * 3p, 14sc, (4sc, inc) * Зp, 10sc = 70sc. 

36 row: 1sc, inc, 66sc, inc, 1sc = 72sc 

Place eye markers in sts 7 and 66. 

37 row: 1sc, inc, (10sc, inc) * 2p, 6sc, dec, 8sc, dec, 6sc, (inc, 10sc) * 2p, inc, 1sc = 76sc 

38 row: 1sc, inc, (11sc, inc) * 2p, 24sc, (inc, 11sc) * 2p, inc, 1sc = 82sc 

Rows 39-41: 82sc (3 rows) 

42 row: 39sc, 4ch, 4sc skip. 39sc = 82sc 

Rows 43-44: 82sc 

45 row: 39sc, 2dec, 39sc = 80sc 

46 row: 34sc, dec, 8sc, dec, 34sc = 78sc 

47 row: 78sc 

48 row: (11sc, dec) * 6p = 72sc 

49 row: 9sc, 7sc along the ear and head together (fold the parts of the head and ear right sides to each other and tie 7sc of the ear and head together, starting to tie from the ear marker (insert the hook from the wrong side of the ear), 40sc, 7sc along the ear and head together (fold the parts of the head and ear right sides to each other and knit 7sc of the ear and head together, starting to tie from the ear marker (insert the hook from the wrong side of the ear), 9sc = 72sc 

50 row: 5sc, dec, 2sc, 7sc along the remaining ear loops, 1sc, (dec, 10sc) * 3p, dec, 1sc, 7sc along the remaining ear loops, 2sc, dec: 5sc = 66sc 

Twist the ends of the ear wires together. Secure the frame with adhesive tape. 

51 row: 66sc 

52 row: (9sc, dec) * 6p = 60sc 

53 row: 4sc, (dec, 8sc) * 5p, dec, 4sc = 54sc 

54 row: (7sc, dec) * 6p = 48sc 

Rows 55-56: 48sc 

57 row: Зsc, (dec, 6sc) * 5p, dec, 3sc = 42sc 

Insert the wire into the jaw. 

Insert the wire coming out of the necks into the hole of the 42nd row of the 2 head. Twist the ends of the jaw and neck wire, wrap with adhesive plaster and hide in the head. Sew the neck to the head. 

Add filler to the head, paying special attention to the upper jaw and cheeks. We fill elastic, but not stone. 

58 row: (5sc, dec) * 6p = 36sc 

Row 59: 36sc 

60 row: 2sc, (dec, 4sc) * 5p, dec, 2sc = 30sc 

Row 61: 30sc 

62 row: (3sc, dec) * 6p = 24sc 

63 row: (2sc, dec) * 6p = 18sc 

64 row: (1sc, dec) * 6p = 12sc 

Cut the thread, leaving the tip about 20 cm long. 

Do not close the hole yet, you need to make and fix the ties through it. 

Add filler to the back of the head. 

REGISTRATION 

Eye markings: 

Point 1, Point 2 -7 stitches from center (main marker) to the side. Distance between points: T1 and TZ, T2 and T4 1 loop. 

From Point 1, insert the needle into Point 2, step back 1 loop, insert the needle into Point. From Point3 to insert the needle to Point4 

Pull up. Repeat the tightening and fix. 

Tightening order: 1-2-3-4 beats 

From Point1, insert the needle into Point4-Point. 

Bring the head into the not closed loops. Pull up. Repeat the tightening. 

From not closed loops in the head, bring the needle to Point 1. Pull up. 

Repeat the tightening and fix. 

Tie-down order: 1-4-3-1 

From Point4, insert the needle into Point2- Point3 

Bring the head into the unclosed loops. Repeat the tightening. Pull up. 

From not closed loops in the head, bring the needle out to Point – Point 4. Pull up. Repeat the tightening and fix. 

Weight order: 4-2-3-4 

Do not cut the thread. 

ROTARY TIGHTENING 

From Point 4, withdraw the needle to the corner of the mouth. Step 1 loop, back to eye. Tighten the tightening, but not strongly, repeat. Commit. 

From Point 4, withdraw the needle to the other eye. Similarly, tighten the other corner of the mouth. 

NOSE TIGHTENING 

Withdraw the needle to the first (start of knitting (leave the tip of the thread about 10 cm, to fix the tightening with a knot). Then bring the needle out to the 15th row and pressing with your fingers make a tightening. Repeat the tightening. Fix the tightening with a knot. Cut the thread, hide. 

TREATMENT OF FINGERS 

Before flashing, make markings (with pins or draw with a pencil). It will be more convenient if all the markings are also repeated from the side of the sole. Do the same in the mirror image on the other leg. 

Withdraw the needle where the pencil line ends (pin). Pull out the thread, while leaving a small protruding tail in the very place where the needle was inserted. Sew a small one-stitch bartack. Each finger will be sewn with four equal stitches. Sew the leg through, while each time pulling the thread and pressing it with your fingers. The last stitch should be done by pulling the thread from above between the fingers. Duplicate the stitch for strength. Now sew the stitches in the opposite direction, bringing the needle out in exactly the same places, only pulling the thread through the unstitched sections. … Don’t forget to tighten the thread! 

Eyebrows 

Mark the location of the eyebrows. Put up the pins. Fasten the thread. Make a stitch, wind 25-30 turns on the needle. Gently pull the turns onto the working thread. Tighten an eyebrow. Do not break the thread. Make the second eyebrow in the same way. 

Toning 

Tint the toy in any way you are used to. For tinting, you can use dry or oil pastels, oil paints. When tinting a toy with oil paint, it is necessary to prepare the paint in advance: squeeze a small amount of paint from the tube onto a napkin and cover it with a saucer so that it does not dry out. After 10-12 hours, when the excess oil is absorbed into the napkin, you can start toning. 

Highlight the eyes and mouth with the darkest tint. 

EYES 

Cut off a piece of white plastic. Knead it in your hands, divide it into two equal parts. Form ball eyes. 

Try on the blanks for the toy. 

Gently press in the glass eye, then gently pull it out of the plastic part and peel off the plastic. Chop the plastic blanks on a thin wire. 

Make teeth from white plastic, trying on the lower jaw. 

tongue 

Form a tongue from a piece of red plastic, giving it the desired shape. Insert a thin wire into the Tongue. 

NOSE 

Cut off a piece of black plastic, or form an oval to give it the shape of a nose. 

Chop the workpiece on a thin wire. 

Bake or cook blanks according to the instructions. 

Polish the details with fine sandpaper. Cover with acrylic varnish. 

If desired, you can tint the recess of the peephole under the pupil. Glue the pupil into the eye blanks. 

Glue eyes, nose, teeth, tongue.

The post Dog Phillip Amigurumi Free Pattern appeared first on En.amigurumitariflerim.com.

Source: Craftsman 

Crochet crochet dog 

Materials and tools: 

Yarn Lama Sonata (250 m / 100 g, wool-50%, acrylic-50%) in two colors 

Hook 2.5 mm 

Ready eyes 12 mm 

Some white felt for the peephole 

Scissors 

Sewing needle 

Glue 

Filler 

Description of how to crochet a dog 

ABBREVATİONS: 

sc – single crochet; 

ch – chain; 

dec – decrease; 

inc – increase; 

sl-st – slip stitch; 

After *, the number of times in parentheses is indicated in parentheses. 

The number of stitches in the row is indicated in brackets at the end of the row. 

The toy is knitted in a spiral. We fill in the course of knitting. 

When publishing your works related to this master class, please indicate Svetlana Voronkova as the author. 

PATTERN

Tail (1 piece) 

We knit in a dark color. We do not follow the marker. We do not stuff. 

6 sc into magic ring; 

1st row: 6 sc; 

2nd row: (2 sc, inc) * 2 (8); 

Rows 3-8: 8 sc; 

Cut the thread, leaving a long end for sewing. 

Ears (2 parts) 

Each ear has two parts. 

First detail 

We knit in rotary rows in a light color. At the end of each row, we make a lifting loop, we unfold the knitting. 

3 sc into magic ring; 

1st row: 3 sc; 

2nd row: inc, sc, inc (5); 

3rd row: 5 sc; 

4th row: inc, 3 sc, inc (7); 

5 row: 7 sc; 

6 row: inc, 5 sc, inc (9); 

7 row: 9 sc; 

8 row: inc, 7 sc, inc (11); 

9 row: 11 sc; 

10 row: inc, 9 sc, inc (13); 

11th row: inc, 11 sc, inc (15); 

12th row: inc, 13 sc, inc (17); 

Rows 13-16: 17 sc; 

Cut the thread, hide the end. 

We knit the second part in a dark color as well as the first. We do not cut the thread. 

Fold in both parts (dark and light) and tie sc with dark yarn. 

We knit the other ear in the same way. 

Front legs (2 parts) 

We start with a light color. Side marker. 

6 sc into magic ring; 

1 row: pr * 6 (12); 

2nd row: (sc, inc) * 6 (18); 

3rd row: (2 sc, inc) * 6 (24); 

Rows 4-6: 24 sc; 

7 row (for left foot): 4 sc, 6 dec, 8 sc (18); 

7 row (right foot): 8 sc, 6 dec, 4 sc (18); 

Next, we knit the same for both legs. 

Rows 8-10: 18 sc; 

11 row: (7 sc, dec) * 2 (16); 

12-20 rows: 16 sc; 

Fill not very tightly. Cut the thread. 

Hind legs (2 parts) 

We start with a light color. We do not follow the marker. 

6 sc into magic ring; 

1 row: pr * 6 (12); 

2nd row: (sc, inc) * 6 (18); 

3rd row: (5 sc, inc) * 3 (21); 

Rows 4-7: 21 sc; 

8 row: (5 sc, dec) * 3 (18); 

9-10 rows: 18 sc; 

11 row: 8 ch, skip 8 sc of the previous row, 10 sc (18); 

12 row: (sc, dec) * 6 (12); 

13 row: 6 dec; 

Pull the hole, cut the thread and hide. 

Fill the foot tightly through the hole. 

Next, knit in a dark color. The marker is on the back of the foot, we do not follow it. 

Row 1: 16 sc around the edge of the hole in the foot; 

2nd row: (7 sc, inc) * 2 (18); 

3rd row: 18 sc; 

4th row: (2 sc, inc) * 6 (24); 

5 row: 24 sc; 

6 row: (3 sc, inc) * 6 (30); 

Rows 7-11: 30 sc; 

12 row: (3 sc, dec) * 6 (24); 

13 row: (2 sc, dec) * 6 (18); 

Slightly!!! fill in the detail. 

14 row: (sc, dec) * 6 (12); 

15th row: 6 dec; 

Pull the hole, cut the thread and hide. 

Head (1 piece) 

We start at the bottom of the head. We knit in a dark color. We do not follow the marker. 

8 sc into magic ring; 

1st row: 8 inc (16); 

2nd row: (sc, inc) * 8 (24); 

3rd row: (2 sc, inc) * 8 (32); 

4th row: (3 sc, inc) * 8 (40); 

5 row: (4 sc, inc) * 8 (48); 

6 row: (5 sc, inc) * 8 (56); 

7 row: (6 sc, inc) * 8 (64); 

8 row: (7 sc, inc) * 8 (72); 

Rows 9-19: 72 sc; 

20 row: (10 sc, dec) * 6 (66); 

21 row: (9 sc, dec) * 6 (60); 

22 row: (8 sc, dec) * 6 (54); 

23 row: (7 sc, dec) * 6 (48); 

24 row: (6 sc, dec) * 6 (42); 

25 row: (5 sc, dec) * 6 (36); 

26 row: (4 sc, dec) * 6 (30); 

27 row: (3 sc, dec) * 6 (24); 

Stuff the part quite tightly. 

28 row: (2 sc, dec) * 6 (18); 

29 row: (sc, dec) * 6 (12); 

30 row: 6 dec (6); 

Pull off the hole. Cut the thread. Dog amigurumi crochet pattern

Body (1 piece) 

We knit in a dark color. Marker on the side, if necessary make an offset loop. 

6 sc into magic ring; 

1st row: 6 inc (12); 

2nd row: (sc, inc) * 6 (18); 

3rd row: (2 sc, inc) * 6 (24); 

4th row: (3 sc, inc) * 6 (30); 

5 row: (4 sc, inc) * 6 (36); 

6 row: (5 sc, inc) * 6 (42); 

7 row: (6 sc, inc) * 6 (48); 

8-13 rows: 48 sc; 

Row 14: 10 sc, 4 dec, 30 sc (44); 

Rows 15-23: 44 sc; 

24 row: 10 sc, 4 inc, 30 sc (48); 

Rows 25-26: 48 sc; 

In the next row, we begin to knit the front legs. 

27 row: 32 sc, 8 sc together with 8 loops of the left foot (6 decreases on the foot look in front), 8 sc together with 8 loops of the right foot (48); 

Row 28: 32 sc, 8 sc on left foot, 8 sc on right foot (48); 

Row 29: 48 sc; 

30 row: (6 sc, dec) * 6 (42); 

31 row: (5 sc, dec) * 6 (36); 

32 row: (4 sc, dec) * 6 (30); 

33 row: (3 sc, dec) * 6 (24); 

Stuff the part quite tightly. 

34 row: (2 sc, dec) * 6 (18); 

35 row: (sc, dec) * 6 (12); 

36 row: 6 dec (6); 

Pull off the hole. Cut the thread. 

Neck (1 piece) 

We start from the bottom. We knit in a dark color. We do not follow the marker. 

Close 15 ch into a ring, then knit in a circle; 

Rows 1-4: 15 sc; 

5 row: (3 sc, dec) * 3 (12); 

6 row: 12 sc; 

Cut the thread, leaving a long end for sewing. 

Muzzle (1 piece) 

We knit in a light color. The marker is on the side, we do not follow it. 

9 ch, then we knit, starting from the second loop from the hook. 

Row 1: 7 sc, 3 sc on the last st of the chain, 6 sc, inc (18); 

2nd row: inc, 6 sc, 3 inc, 6 sc, 2 inc (24); 

3rd row: sc, inc, 6 sc, (sc, inc) * 3, 6 sc, (sc, inc) * 2 (30); 

Rows 4-7: 30 sc; 

Cut the thread, leaving a long end for sewing. 

Lower lip (1 piece) 

We knit in a light color. We do not follow the marker. We do not stuff. 

6 sc into magic ring 

1st row: 6 inc (12); 

2nd row: (sc, inc) * 6 (18); 

3-4 row: 18 sc; 

Fold the piece in half, knit on both sides 9 sc; 

Eye sockets (2 parts) 

We knit in a light color. We do not follow the marker. 

6 sc into magic ring; 

1st row: 6 inc (12); 

2nd row: (sc, inc) * 6 (18); 

3rd row: (2 sc, inc) * 6 (24); 

4th row: (3 sc, inc) * 6 (30); 

5 row: (4 sc, inc) * 6 (36); 

Cut the thread, leaving a long end for sewing. 

Assembly 

Sew on all details. Reinforce the neck with thick wire and sew. For the hind feet, you can use a thread mount. Glue round circles of white felt under the eyes, eyes, nose. Your dog Nyusha is ready! 

The post Cute Dog Amigurumi Free Pattern appeared first on En.amigurumitariflerim.com.

TERMS USED

sc – single crochet

inc – increase

dec – decrease

PATTERN

Ears (2 pcs)

1)6 sc into magic ring

2)6 sc

3)6 inc (12)

4)12 sc (12)

5) (1 sc, inc) * 6 (18)

6-8) 18 sc (18)

9) (1 sc, dec) * 6 (12)

10)6 dec

Knit in gray. Fasten the thread. The original says what to leave

the tail, probably for sweats later, but I did not leave, because the ears get tied up, and you can correct them later if necessary)) here is at your discretion.

Head.

We start in white

1)6 sc into magic ring

2)6 inc (12)

3) (1 sc, inc) * 6 (18)

4) (2 sc, inc) * 6 (24)

5) (3 sc, inc) * 6 (30)

6-8) 30 sc (30)

9)9 sc, gray: 2 sc, white: 19 sc (30)

10) (2 sc, inc) * 2, 2 sc, gray: inc, 2 sc, inc, white: (2 sc, inc) * 2, 12 sc (36)

11) (3 sc, inc) * 2, 3 sc, gray: inc, 3 sc, inc, white: (3 sc, inc) * 2, 12 sc (42)

12) (4 sc, inc) * 2, 3 sc, gray: 1 sc, inc, 4 sc, inc, white (4 sc, inc) * 2, 12 sc (48)

Then everything is gray

13) (5 sc, inc) * 6, 12 sc (54)

14-19) 54 sc (54)

20) In this row we will knit the ears 13 sc, 3 sc with the ear, 15 sc, 3 sc

with ear, 20 sc (54)

You can insert eyes between 10 and 11 rows

21) (7 sc, dec) * 6 (48)

22) 48 sc

23) (6 sc, dec) * 6 (42)

24) (5 sc, dec) * 6 (36)

25) (4 sc, dec) * 6 (30)

Stuff your head

26) (3 sc, dec) * 6 (24)

27) (2 sc, dec) * 6 (18)

28) (1 sc, dec) * 6 (12)

29)6 dec

Paws and tail

Front legs 2 pcs.

White

1)6 sc into magic ring

2)6 inc (12)

3) (1 sc, inc) * 6 (18)

4) (2 sc, inc) * 6 (24)

5-7) 24 sc

Gray

8)24 sc

9) (10 sc, dec) * 2 (22)

10)22 sc

11) (9 sc, dec) * 2 (20)

12)20

13) (8 sc, dec) * 2 (18)

14)18

15) (7 sc, dec) * 2 (16)

16) 16 sc

17) (6 sc, dec) * 2 (14)

18)14 sc

19) (5 sc, dec) * 2 (12)

20-25) 12 sc

26) (4 sc, dec) * 2 (10)

27-31) 10 sc

32) (3 sc, dec) * 2 (8)

Tail

start white

1)6 sc into magic ring

2)6 sc

3)6 inc (12)

4)12 sc

5) (1 sc, inc) * 6 (18)

6) (2 sc white, 1 sc gray) * 6 (18)

7) (1 sc white, 2 sc gray) * 6 (18)

Next we knit gray

8-15) 18 sc

16) (1 sc, dec) * 6 (12)

17) 6 dec (6)

Hind legs 2 pcs.

White

1)6 sc into magic ring

2)6 inc (12)

3) (1 sc, inc) * 6 (18)

4) (2 sc, inc) * 6 (24)

5) (3 sc, inc) * 6 (30)

6) (4 sc, inc) * 6 (36)

7-10) 36 sc

11) (2 sc, dec) * 4, 10 sc, gray 10 sc (32)

12) (1 sc, dec) * 4, 20 sc (28)

13)4 dec, 20 sc (24)

14) (10 sc, dec) * 2 (22)

15)22 sc

16) (9 sc, dec) * 2 (20)

17)20 sc

18) (8 sc, dec) * 2 (18)

19) 18 sc

20) (7 sc, dec) * 2 (16)

21)16 sc

22) (6 sc, dec) * 2 (14)

23) 14 sc

24) (5 sc, dec) * 2 (12)

25)12 sc

Body

Gray

1)6 sc into magic ring

2)6 inc (12)

3) (1 sc, inc) * 6 (18)

4) (2 sc, inc) * 6 (24)

5) (3 sc, inc) * 6 (30)

6) (4 sc, inc) * 6 (36)

7) (5 sc, inc) * 6 (42)

8) We knit the hind legs and tail. 6 sc with the foot, inc, 6 sc, inc, 6 sc with the foot, inc, 6 sc, inc, 1 sc, 3 sc with the tail, 2 sc, inc, 6 sc, inc (48)

9) (7 sc, inc) * 6 (54)

10-18) 54 sc

19) Move the marker 3 loops back, it will be 3 loops of a new row and continue to knit (dec, 3 sc) * 6, 21 sc (48)

20) (2 sc, dec) * 6, 24 sc (42)

21) (12 sc, dec) * 3 (39)

22)39 sc

23) (11 sc, dec) * 3 (36)

24) 36 sc

25) (10 sc, dec) * 3 (33)

26)33 sc

27) (9 sc, dec) * 3 (30)

28)30 sc

29) (8 sc, dec) * 3 (27)

30)27 sc

31) (7 sc, dec) * 3 (24)

32)24 sc

33) (6 sc, dec) * 3 (21)

34)21 sc

35) (5 sc, dec) * 3 (18)

36) We knit the front legs 2 sc, 4 sc with the paw, 6 sc, 4 sc with the paw, 2 sc

37) (4 sc, dec) * 3 (15)

38)15 sc

Stuff

Decor

We embroider the nose, make the ears tightened, embroider a strip on the forehead

tum:

White

1)6 sc into magic ring

2)6 inc (12)

3) (1 sc, inc) * 6 (18)

4) (2 sc, inc) * 6 (24)

5) (3 sc, inc) * 6 (30)

Further turning rows

1)9 sc, ch (9)

2) Skip 1 loop, 8 sc, ch, rotate

3) Skip 1, 7 sc, ch, rotate, etc. up to 9 row

Sew the body to the head. Done!

The post Amigurumi Dog Husky Free Crochet Pattern appeared first on En.amigurumitariflerim.com.

** SIZE: 9″ /23 cm tall when made with the indicated yarn.  

MATERIALS:

– Worsted weight yarn in light brown, white, blue, dark brown and pink  

– Size C-2/3 mm  

crochet hook – Safety eyes (15 mm) – Safety nose (22 mm x 16 mm)  

– Yarn needle 

– Fiberfill for stuffing  

— Stitch marker 

ABBREVATİONS

Ch – Chain

Sc – Single crochet

Dec – Decrease

İnc – İncrease

Dc – Double Crochet

Sl-st – Slip – stitch

PATTERN

HEAD  

(in light brown yarn)  

Rnd 1: start 6 sc in a magic ring [6]  

Rnd 2: inc in all 6 st [12]  

Rnd 3: (sc in next st, inc in next st) repeat 6 times (18)  

Rnd 4: (sc in next 2 st, inc in next st) repeat 6 times (24)  

Rnd 5: (sc in next 3 st, inc in next st) repeat 6 times (30)  

Rnd 6: (sc in next 4 st, inc in next st) repeat 6 times (36)  

Rnd 7: (sc in next 5 st, inc in next st) repeat 6 times [42]  

Rnd 8: (sc in next 6 st, inc in next st) repeat 6 times (48)  

Rnd 9: (sc in next 7 st, inc in next st) repeat 6 times (54)  

Rnd 10 – 12: sc in all 54 st [54]  

For the following rounds, we change color to create the eye patches.  

The underlined stitches are worked in dark brown yarn.  

The other stitches are worked in light brown yarn.  

Rnd 13: sc in next 19 st, sc in next 4 st, sc in next 8 st, sc in next 4 st, sc in next 19 st [54]  

Rnd 14: sc in next 18 st, sc in next 6 st, sc in next 6 st, sc in next 6 st, sc in next 18 st [54]  

Rnd 15: sc in next 17 st, sc in next 7 st, sc in next 6 st, sc in next 7 st, sc in next 17 st [54]  

Rnd 16: sc in next 17 st, sc in next 3 st, ch 1, skip 1 st, sc in next 3 st, sc in next 6 st, sc in next 3 st, ch 1, skip 1 st, sc in next 3 st, sc in next 17 st (52 + 2 ch! Work round 17 on all stitches, including chairs.  

Rnd 17: inc in next st, sc in next 8 st, inc in next st, sc in next 7 st, sc in next st, inc in next st, sc in next 5 st, sc in next 3 st, inc in next st, sc in next 2 st, sc in next 6 st, inc in next st, sc in next 8 st, inc in next st, sc in next 8 st [60]  

Rnd 18:(sc in next 5 st, inc in next st) repeat 3 times, sc in next 3 st, sc in next 2 st, inc in next st, sc in next 3 st, sc in next 2 st, inc in next st, sc in next 4 st, sc in next st, inc in next st, sc in next 4 st, sc in next st, inc in next st, (sc in next 5 st, incin next st) repeat 3 times (70)  

Fasten off the dark brown yarn and weave in the yarn end.  

Continue with light brown yarn.  

Rnd 19 – 24: sc in all 70 st [70]  

Rnd 25: sc in next 7 st, (dec, sc in next st) repeat 4 times, (sc in next st, dec) repeat 4 times, sc in next 8 st, (dec, sc in next st) repeat 4 times, (sc in next st, dec) repeat 4 times, sc in next 7 st (54)  

Rnd 26: (dec, sc in next 4 st) repeat 9 times (45)  

Rnd 27: (dec, sc in next st) repeat 15 times (30)  

Fasten off and weave in the yarn ends.  

Insert the safety eyes in the ch-spaces on round 16. Using white yarn, embroider a line below the eyes. Stuff the head with fiberfill (picture 5). 

FOOT  

(make 2, in light brown yarn)  

We start by making two feet.  

They are later joined to to create the body.  

Rnd 1: start 6 sc in a magic ring [6]  

Rnd 2: inc in all 6 st [12]  

Rnd 3: (inc in next st, sc in next st) repeat 6 times [18]  

Rnd 4: (anc in next st, sc in next 2 st) repeat 6 times (24)  

Rnd 5: sc in next 8 st, (4-dc bobble in next st, sc in next st) repeat 4 times, sc in next 8 st [24]  

Rnd 6: sc in next 6 st, dec 6 times, sc in next 6 st [18]  

Rnd 7 – 9: sc in all 18 st [18]  

Fasten off the first foot and mark the 4th last stitch of round 9 with a stitch marker.  

Don’t fasten off the second foot but continue working round 10.  

Rnd 10: sc in next 6 st [6] Do not finish this round. 

BODY  

(in light brown yarn)  

In the next round, we will join both feet.  

Rnd 11: continue working on the first foot, inc into the marked st of the first foot, sc in next st, (inc in next st, sc in next st) repeat 8 times, continue on the second foot, (inc in next st, sc in next st) repeat 9 times [54]  

Rnd 12: sc in next 21 st, (inc in next st, sc in next st) repeat 3 times, (sc in next st, inc in next st) repeat 3 times, sc in next 21 st [60]  

Rnd 13 – 15: sc in all 60 st [60] 

Change to white yarn.  

Rnd 16: slst in all 60 st [60]  

Rnd 17: BLO sc in all 60 st [60]  

Rnd 18 – 19: sc in all 60 st [60]  

Stuff the feet firmly with fiberfill.  

Rnd 20: (dec, sc in next 8 st) repeat 6 times (54)  

Rnd 21: sc in all 54 st (54)  

Rnd 22: (dec, sc in next 7 st) repeat 6 times [48]  

Rnd 23: sc in all 48 st [48]  

Rnd 24: (dec, sc in next 6 st) repeat 6 times [42]  

Rnd 25 – 26: sc in all 42 st [42]  

Rnd 27: (dec, sc in next 5 st) repeat 6 times (36)  

Rnd 28 – 29: sc in all 36 st [36]  

Rnd 30: (dec, sc in next 4 st) repeat 6 times [30]  

Rnd 31: sc in all 30 st [30]  

Fasten off, leaving a long tail for sewing.  

Stuff the body firmly with fiberfill.  

Sew the head to the body.  

Add more fiberfill if necessary, before closing the seam. 

SNOUT  

(in dark brown yarn)  

Ch 12. Stitches are worked around both sides of the foundation chain.  

Rnd 1: skip first ch on the hook, sc in next 10 st, 3 SC in next st. Continue working on the other side of the foundation chain, sc in next 9 st, inc in next st (24)  

Rnd 2: inc in next st, sc in next 4 st, SC + ch 1 + sc in next st, sc in next 4 st, inc in next 5 st, sc in next st, sc3tog, sc in next st, inc in next 4 st [34]  

Rnd 3: sc in next 7 st, 3 sc in next st, sc in next 7 st, (sc in next st, inc in next st) repeat 3 times, sc in next 2 st, sc3tog, sc in next 2 st, (inc in next st, sc in next st) repeat 3 times [40]  

Rnd 4: sc in next 26 st, dec, sc in next st, dec, sc in next 9 st [38] Rnd 5: dec, sc in next 4 st, dec, sc in next st, dec, sc in next 4 st, dec, sc in next 8 st, dec, sc in next st, dec, sc in next 8 st [32]  

Rnd 6: FLO hdc in all 32 st (32)  

Fasten off, leaving a long tail for sewing.  

Insert the safety nose in the ch 1 made in round 2.  

Stuff the snout with fiberfill.  

Sew the remaining loops of round 6 between rounds 16 and 22 of the head.  

1 snour should resemble a triangular shape.  

Use the yarn tail to embroider a few lines, starting below the nose down to round 5 to create a crease picture 6). 

TONGUE  

(in pink yarn)  

Rnd 1: start 3 hdc in a magic ring (3)  

Fasten off, leaving a long tail for sewing.  

Sew the tongue to the bottom of the crease picture 7). 

EAR  

(make 2, in dark brown yarn)  

Rnd 1: start 6 sc in a magic ring [6]  

Rnd 2: (inc in next st, sc in next st) repeat 3 times (9)  

Rnd 3: (inc in next st, 2 sc in next st) repeat 3 times (12)  

Rnd 4 – 6: sc in all 12 st [12]  

Rnd 7: (inc in next st, sc in next st) repeat 6 times (18)  

Rnd 8: sc in all 18 st [18]  

Continue crocheting in rows.  

Row 9: (inc in next st, sc in next st) repeat 2 times, (sc in next st, inc in next st) repeat 2 times, ch 1, turn [12]  

Row 10: sc in all 12 st (12) 

Fasten off, leaving a long tail for sewing.  

Sew the ears to either side of the head in a slanted manner, between rounds 7 and 13. 

ARM  

(make 2, start in light brown yarn)  

Rnd 1: start 6 sc in a magic ring [6]  

Rnd 2: inc in all 6 st (12)  

Rnd 3: (inc in next st, sc in next st) repeat 6 times (18)  

Rnd 4: sc in next 6 st, (3-dc bobble in next st, sc in next st) repeat 3 times, sc in next 6 st [18]  

Rnd 5:sc next 6 st, dec 3 times, sc in next 6 st [15]  

Rnd 6: sc in all 15 st (15)  

Change to white yarn.  

Rnd 7: slst in all 15 st (15)  

Rnd 8: BLO sc in all 15 st [15]  

Put a stitch marker in your last loop and leave the white yarn hanging.  

Join blue yarn between rounds 7 and 8 and work a round of surface slip stitches (pic tures 8-12).  

Continue with the white yarn.  

Rnd 9: (dec, sc in next 3 st) repeat 3 times [12]  

Rnd 10: sc in all 12 st [12]  

Rnd 11: (dec, sc in next 2 st) repeat 3 times [9]  

Rnd 12: sc in all 9 st [9]  

Fasten off, leaving a long tail for sewing.  

Stuff the arms lightly with fiberfill.  

Flatten the opening and sew it closed. Sew the arms to either side of the body in a slanted manner, between rounds 29 and 30. 

SAILOR-STYLE COLLAR  

(in blue yarn)  

Ch 57. Work in rows.  

Rnd 1: start in the second ch from the hook, slst in next 2 st, sc in next 6 st, hdc in next 3 st, dc in next 4 st, dc + ch 1 + dc in next st, dc in next 24 st, dc + ch 1 + dc in next st, dc in next 4 st, hdc in next 3 st, sc in next 6 st, slst in next 2 st [58 + 2 ch]  

Fasten off, weave in the yarn ends. Join blue yarn with a slst in the ch 1 made in Rnd 1. Rnd 2: ch 3, dc in next 26 st, ch 3, sist in next ch 1. Fasten off, leaving a long tail for sewing picture 13).  

Turn the collar and work on the wrong side for the em bellishment. Join white yarn in the right tip. Surface slst around the collar (picture 14).  

The chains should be on the wrong side picture 15) and the straight lines at the front.  

Fasten off, leaving a long tail for sewing (picture 16).  

Pin the collar to the body.  

Sew the inside of the collar to the neck using the blue yarn tail, leaving both tips of the collar free.  

Place one tip on top of the other to form a cross. 

Using the white yarn tail, sew the collar tips together, about 1″/2.5 cm from the end. Include a few stitches of the body to lock them in place (pictures 17-18).  

Repeat your stitch a few times to thicken as this will serve as the knot for the collar picture 19). 

TAIL  

(in light brown yarn)  

Ch 8. Start in the second ch from the hook.  

Rnd 1: sist in next 2 st, inc in next 2 st, 2 hdc in next st, inc in next st, hdc in next st [11]  

Fasten off, leaving a long tail for sewing. ew the tail to the back below the white shirt (picture 20).  

Use the remaining yarn tail to close the hole where the feet connect. 

HAT  

(in white yarn)  

Rnd 1: start 6 sc in a magic ring [6]  

Rnd 2: inc in all 6 st [12]  

Rnd 3: (inc in next st, sc in next st) repeat 6 times (18)  

Rnd 4: (inc in next st, sc in next 2 st) repeat 6 times (24)  

Rnd 5 – 7: sc in all 24 st [24]  

Fasten off.  

Turn, ch 1. Work in the opposite direction.  

Rnd 8: FLO (inc in next st, sc in next 3 st) repeat 6 times [30]  

Rnd 9: sc in all 30 st [30]  

Fasten off, leaving a long tail for sewing.  

Join blue yarn.  

Surface slst in all 30 st of  

Rnd 9. Fasten off and weave in the yarn ends.  

Stuff the hat with fiberfill and sew it on top of the head using the white yarn tail. 

The post Papi the Sailor Pug Amigurumi Free Pattern appeared first on En.amigurumitariflerim.com.