Santa Claus, Merry 

Gnome and the Cheerful Chef 

3 dolls one description! 

The master class is based on the Santa Claus doll. Added to description 

design options for the Jolly Gnome and Jolly Cook dolls. 

What the master class includes: 

The whole process of knitting a doll is shown step by step with a photo. 

M / c above the average level of difficulty, does not include training in techniques 

knitting, crochet skills are required. 

how to tie a doll body 

how to knit a set of clothes: a jacket, boots for Santa and 

shoes for the Cook and the Gnome, hats for Santa and the Gnome, 

a chef’s hat, mittens for Santa, a scoop and a chef’s shawl 

how to make eyes 

… 

how to sew on hair and beard tresses, how to sew on hair and 

Gnome’s beard 

The master class provides options for knitting the doll’s body and 

inside out. I knitted on the wrong side, it’s more convenient for me. 

Recommendation: For the doll’s clothes and body, take the same type of yarn, 

because the calculation for knitting the doll’s body and clothes is made for yarn 

the same footage. The body is crocheted 1.0, crocheted clothes 1.25. 

If your yarn is different in thickness, then try on clothes and 

adjust the knitting yourself. 

Snowflakes cut from winter tulle are used for decoration 

collection. 

Introduction: 

My instagram My group in FB My group in contact 

Important information! 

All rights to this master class are reserved. The master class is 

paid and is intended for personal use only. 

Resale of metal products and distribution is prohibited! Knit for yourself, for 

your loved ones, for your buyers, sell your dolls! 

Please respect copyrights! 

Olga Pinsky 

Cotton yarn (Pekhorka openwork or Alize miss) 280m / 50g. 

For finishing the yarn of your choice: weed Alize Dekofour, Adelina 

Diamond or Alize soft 

Hook number 1.0 for doll body, hook 1.25 for clothes 

Tresses such as a rope or wool and a felting needle 

Buttons for a jacket and boots, white beads, pom-poms 

Iris or floss thread for eye embroidery, sewing needle, 

markers for drawing on fabric (optional) 

Copper wire for the frame with a diameter of 2.0 or 2.5 (you can 

in isolation) about 60 -70cm. Desirable chenille wire with 

fluff, but not necessarily 25cm and aluminum wire 

diameter 1.5cm length about 25cm for pens 

Adhesive or gel like UXU or Crystal for textiles 

Filling: holofiber or synthetic fluff 

Some thin felt, plastic, or cardboard for the insoles 

ABBREVİATİONS:

sc – single crochet, 

DC – double crochet, 

HDC – half double crochet, 

sl-st – slip stitch, 

loop – lifting loop, if at the end of the row 

ch – chain, 

inc – increase, knit from 1 loop 2, 

dec – decrease, knit 2 loops together 

Hook 1.0. We knit with flesh-colored yarn. 

The handles may not seem symmetrical, but when we connect to the body and 

insert the frame everything will fall into place. Description for knitting on the wrong side. 

If you knit on the front side, then everything is the same, only the handles 

swap places (first you get right, then left). 

PATTERN

Left handle: 

1st row – knit in flesh color 6 sc in an amigurumi ring 

2nd row – 1inc * 6 (12), marker 

3rd row – (1sc, 1inc) * 6 (18) 

4 – 6 row (3 rows) – 18sc (18) 

7th row – put a marker, in 1sc knit 5DC, 17sc (23) 

8 row – 5DC knit with one vertex, 17sc (18) 

9th row – 2sc, (1dec, 2sc) * 4 (14) 

10 row – 1sc, (1dec, 2sc) * 3, 1sc (11) 

11-12 rows – 11sc (11) 

13th row – 1sc, (1inc, 2sc) * 3, 1sc (14) 

14th row – 13sc, 1inc (15) 

15th row – 1inc, 14sc (16), knit another 10sc 

to the middle of the back of the hand, marker 

Change the color to green for the sweater. 

16-17 rows – 16sc (16) 

18th row – 1inc, 7sc, 1inc, 7sc (18) 

19-20 rows (2 rows) – 18sc (18) 

Arms: 

21 row – 3sc, 1dec, 13sc (17) 

22 row – 2sc, 1dec, 2sc, 1dec, 7sc, 2inc HDC (elbow) (17) 

23rd row – 2sc, 1inc, 2sc, 1inc, 7sc, 2dec (17) 

24th row – 17sc (17) 

25th row – 3sc, 1inc, 13sc (18) 

26-28 rows (3 rows) – 18sc (18) 

29th row – 9sc, 1inc, 8sc (19) 

30th row – 19sc (19) 

31 row – 1inc, 18sc (20) 

32 row – 10sc, 1inc, 9sc (21) 

33 row – 21sc (21), knit another 10sc to the middle of the armpit, thread 

fasten and trim. 

Right handle: 

1-20 row – like the left handle 

21 row – 13sc, 1dec, 3sc (17) 2 alignment loops 

22nd row – 2inc HDC (elbow), 7sc, 1dec, 2sc, 1dec, 2sc (17) 

23rd row – 2dec, 7sc, 1inc, 2sc, 1inc, 2sc (17) 

24th row – 17sc (17) 

25th row – 13sc, 1inc, 3sc (18), 

26-28 rows (3 rows) – 18sc (18) 

29th row – 8sc, 1inc, 9sc (19) 

30th row – 19sc (19) 

31 row – 18sc, 1inc (20) 

32 row – 9sc, 1inc, 10sc (21), 

33 row – 21sc, knit another 14sc until the middle 

armpits, fasten and cut the thread. 

Hands (continued): 

Hook 1.0. Cast on a chain of 8 air loops with green yarn, 

knit in the 2nd loop from the hook: 

1 row – 1inc, 5sc, 4sc in 1 loop, 5sc, 1inc (18) 

2nd row – 2inc, 6sc, 3inc, 6sc, 1inc (24) 

3rd row – (1inc, 1sc) * 2, 1inc, 5sc, (1inc, 1sc) * 2, 1inc, 6sc, 1inc, 1sc, 

1inc (32) 

4th row – (1sc, 1inc) * 3, 8sc, (1inc, 1sc) * 3, 1inc, 8sc, 1inc, 1sc, 1inc (41) 

Cut the felt insole to fit the foot, glue it later. 

5 row – -41sc for the front half loop (if knitting on the wrong side) or for 

back half loop (if knitting on the front side) 

6,7,8 rows – 41sc, (at the end of the 8th row, make 4 alignment loops so 

so that the beginning of the row is in the middle of the back of the foot), marker. 

Glue the insole to the inside of the foot. 

Important! The description indicates knitting on the wrong side, if you knit on the front 

side, then accordingly change “for the front p / p” (9th row) to “for 

back p / p “and” behind the back p / p “(10, 11 rows) to” behind the front p / p ” 

(half loop). 

9 row – 7sc, 13 decDC for the front p / p, 8sc (28) 

10 row – 7sc, 7dec for back half loop, 7sc (21) 

11 row – 5sc, 5dec for the back half loop, 6sc (16) 

12 row – 1dec, 12sc, 1dec (14) 

You can start changing the thread from row 15 if it is difficult. 

13 row –- Changing the thread to white 2sc, 1inc, 8sc, 1inc, 2sc (16) 

14 row – 16sc (16) 

15 row – Change the thread to green 1sc, 1inc, 12sc, 1inc, 1sc (18) 

Legs: 

Legs (continued): 

16th row – 3sc, 1inc, 10, 1inc, 3sc (20) 

17th row – changing the thread to white 2sc, 1inc, 14sc, 1inc, 2sc (22) 

18th row – 1inc, 10sc, 1inc, 10sc (24) 

19, 20 row (2 rows) – change the thread to green 24sc (24) 

21, 22 row – change the thread to white 24sc (24) 

23rd row – changing the thread to green 24sc (24) 

24th row – (1dec, 4sc) * 4 (20) 

We begin to knit the pant leg with red yarn. 

25th row – 9sc, 2inc, 9sc (22) 

26th row – 22sc (22) 

27 row – (1sc, 1inc) * 11 (33) 

28th row – 33sc (33) 

29th row – (2sc, 1inc) * 11 (44) 

30-35 row (6 rows) – 44sc (44) 

36th row – 10sc, 1dec, 20sc, 1dec, 10sc (42) 

37 row – 42sc (42), knit 31-32sc more (to the middle of the inner 

parts of the leg), fasten and cut the thread. 

This will be the right leg (if you knit on the wrong side) and the left leg (if you knit 

on the face). 

Let’s tie the left leg. We finish knitting in the middle of the inner 

parts of the leg, i.e. 37 row – 42sc (42), knit another 10sc, the thread is not 

cut off. 

Author 

Legs (continued): 

It’s time to insert the frame. Take a wire and cut 2 sections 

30-35 cm long. Bend the wire at the ends (where the feet are), 

as shown in the photo, wrap with electrical tape. 

Insert into each leg. Start stuffing the legs first in the foot. 

Do not rush, add synthetic fluff in small portions using 

tweezers, while squeezing with your fingers, as if distributing 

filler inside. So gradually fill the legs themselves, wide 

do not fill part of the legs with filler so that the synthetic fluff does not climb 

under to 

A 

sniffer. 

second doll 

Body: 

We begin to connect the legs and knit the body. We continue to knit with color 

panties. 

38 row – dial 2 from the middle of the inner thigh of the left leg 

air loops (ch), then along the right leg (go to the side 

priests) 42sc, 2sc (along a chain of 2ch), 42sc on the left leg 

(88) Here we put a marker. This is for knitting on the wrong side. 

If you knit on the face, everything is the same, only from the right leg to the left. 

39 row – 13sc, 1inc, 60sc, 1inc, 13sc (90), 1 more sc from the next row, 

marker 

40-41 rows (2 rows) – 90sc (90) 

42 row – 20sc, 1dec, 46sc, 1dec, 20sc (88) 

Connect the wires of both legs, you can twist them a little and wind 

electrical tape. I start adding filler to the body when I tie it above 

waist. 

Body (continued): 

43rd row – 15sc, 1dec, 54sc, 1dec, 15sc (86) 

44th row – 14, 1dec, 54bn, 1dec, 14sc (84) 

45 row – 84sc (84), 1 alignment loop 

46 row – 10, 1dec, (19sc, 1dec) * 3, 9sc (80) 

47th row – 80sc (80) 

48th row – 9sc, 1dec, (18sc, 1dec) * 3, 9sc (76) 

49th row – 76sc (76) 

50th row – 9sc, 1dec, (17sc, 1dec) * 3, 8sc (72)) 

51 row – 72sc (72) 

52 row – 17sc, 1dec, 34sc, 1dec, 17sc (70) 

53 row – 7sc, 1dec, (16sc, 1dec) * 3, 7sc (66), 1 alignment loop 

54th row – (20sc, 1dec) * 3 (63) 

Change the color of the yarn to the color of the sweater. 

55 row – (19sc, 1dec) * 3 (60), 1 alignment loop 

56 row – 15sc, 1dec, 26sc, 1dec, 15sc (58) 

57 row – 11sc, 1dec, (14sc, 1dec) * 2, 11sc, 1dec (54) 

58-62 rows (5 rows) – 54sc (54), marker in the middle of the back, with 

make alignment loops if necessary 

Body (continued): 

63 row – 12sc, 1inc, 28sc, 1inc, 12sc (56) 

64-70 rows (7 rows) – 56sc (56) 

The height of the doll depends on the number of these rows, you can knit more 

or less by 2-4 rows. 

I do not like long dolls, I like cartoon more and 

slight disproportion in the figure of the character. Do not forget, 

that the shoulders, neck, head will also be added to the height of the doll, so I 

leaving only 70 rows before tying hands. 

Now add some padding to the legs and body. We fill tightly 

in small portions, seal. 

Important: check that the marker is exactly in the middle of the backrest. When 

if necessary, knit 1-2 offset loops. 

We begin to knit our hands. 

71 row – 12sc on the back, 3sc knit together with 3sc right 

knobs, 26sc, 3sc together with 3sc left knob, 12sc (56) 

72 row – 12sc, 18sc on the right handle, 26sc, 18sc on the left 

handle, 12sc (86) 

73 row – 11sc, 1dec, 16sc, 1dec, 11sc, 1dec, 11sc, 1dec, 16sc, 1dec, 

10sc, 1dec (together 1sc from this row and 1sc from next row) (80), marker 

74th row – 10sc, 1dec, 14sc, 1dec, 11sc, 1dec, 10sc, 1dec, 14sc, 1dec, 11sc (75) 

Body (continued): 

At this stage, you need to insert the wire into your hands. I take aluminum 

wire and chenille wire with fibers (if you don’t have one, then 

nothing wrong). Cut one and the other wire along the length of the arms along with 

shoulders and bend on the palms (try on), fold together, bend on 

place of your palms and wrap with electrical tape for strength, as shown in Photo. I cut about 25cm. 

Insert the wire first into one handle, then into the other, falling between body wires. Wrap the body wire with electrical tape to its full height neck. 

If there is no fuzzy wire, then add synthetic fluff to the handles throughout 

the length is a little, while kneading the handles. 

Body (continued): 

75th row – 75sc (75) 

76th row – 9sc, 1dec, 12sc, 1dec, 22sc, 1dec, 12sc, 1dec, 10sc, 1dec (70) 

77th row – 4sc, (1dec, 8sc) * 6, 1dec, 4sc (63) 

78 row (5sc, 1dec) * 9 (54), stuff the body tightly, a little filler 

add to the hands, form the hangers. 

79 row – (4sc, 1dec) * 9 (45) 

80th row – (3sc, 1dec) * 9 (36) 

81 row – (2sc, 1dec) * 9 (27) 

82 row – (1sc, 1dec) * 9 (18) 

We knit the neck. Before changing color to flesh, tie a collar and put on 

neck. Change the color to flesh after about 87-88 series. 

83-90 rows (8 rows) – 18sc (18), you can make your neck longer. 

Collar for sweater: 

Bend the wire in a loop and wrap 

electrical tape. 

We knit the collar in the color of the sweater. I knitted in a round and put it on my neck 

before knitting the head and before changing the color to flesh. You can simply link 

strip along the height of the neck with a width of 30sc and then sew the edges on the doll. 

Hook 1.25. We collect a chain of 30 ch (try on the girth of the neck 

dolls, if necessary, increase or decrease the number of loops). 

1st row – we close the chain in a circle, 2 pp, 30DC, sl-st, 2 pp 

At the end of each row we make a connecting post (sl-st) and 2 loops 

lifting (pp), we knit round. 

2-6 row – 2DC persons, 2DC from (30) 

Fasten, thread, leave the sewing tip and sew the collar to 

sweater with a few stitches. 

Sweater collar (continued): 

Head: 

We continue to knit the head after the neck. We bend the wire with a loop and 

wrap with electrical tape. 

1st row – (2sc, 1inc) * 6 (24) 

2nd row – (3sc, 1inc) * 6 (30) 

3rd row – 2sc, 1inc, (4sc, 1inc) * 5, 2sc (36) 

4th row – (5sc, 1inc) * 6 (42) 

5th row -3sc, 1inc, (6sc, 1inc) * 5, 3sc (48) 

6th row – (7sc, 1inc) * 6 (54) 

7th row – 4sc, 1inc, (8sc, 1inc) * 5, 4sc (60) 

8th row – (9sc, 1inc) * 6 (66) 

9th row – 5sc, 1inc, (10sc, 1inc) * 5, 5sc (72) 

10th row – (11sc, 1inc) * 6 (78) 

11th row – 6sc, 1inc, (12sc, 1inc) * 5, 6sc (84) 

12 – 28 rows (17 rows) – 84sc (84) 

At this stage, we will make the eyes (see the section “Eye Shaping”). After 

after the eyes are ready, we continue to knit further. 

We have tied 28 rows of the head, we begin to make the eyes. 

For eyes, you can use 4-5 ply floss or iris. I 

I use iris. 

1) Count 6 rows from top to bottom. On this row, define the center 

face, pin up photo 1. 

Then count 6-7 sc left and right and pin the pins. Here 

there will be pupils. 

2) Insert the needle and thread from the back, leaving the tip on the wrong side 

about 8cm, no knots yet. Take the thread itself about 80cm, do not 

cut the threads before the end of the process, then we will be the same thread 

make the contour and eyelashes of the eyes. 

We make the pupils with black or dark brown thread, as shown in 

photo: first a cross, then a square (2sc * 2sc). Required 

do both eyes in parallel. 

3) From the inside, we introduce a needle with a green thread and make a fix photo4, 

leaving a small loop of photo 5. Crochet this loop 1.25 

we make a chain of 11ch (try on the place) photo 6., the end of the thread with 

Pull up the wrong side so that it is not weak. 

Eye shaping: 

We put aside the hook, take the needle in our hands, insert it into the last loop 

chains, tighten the thread. We introduce the needle into the upper right corner of the pupil and 

output to the lower corner of the pupil. The result is an iris – a pigtail photo 8. 

5) Fix the pigtail iris. To do this, grab the iris pigtail as 

with a loop, insert the needle at the same point back inside and bring it to the left 

lower corner of the pupil photo 9. 

Look at the pictures and do the same with the second eye. 

6) Insert the needle with a light green thread into the upper left corner of the eye, 

we fix photo 10. Pull the thread, leaving a loop of photo 11. 

Eye shaping (continued): 

We take the hook, make 4-5ch (according to the height of the iris), put the hook aside, 

take the needle in our hands, insert it into the last loop of the chain, tighten the thread. 

We insert the needle into the lower left corner of the eye, we bring it to the upper right corner 

photo 13. Making another pigtail. 

7) We pass to the second eye, repeat all actions. 

We will make stitches on a dark green iris, as if wrapping it with thread 

light green photo 14. 

Also make the pigtails white, fasten them and embroider the highlights on 

pupils photo 15, 16. 

8) We take a needle with a brown thread, with which the pupils were embroidered, 

we enter into the upper right corner and sew the lower eyelid with a seam “back 

needle “along the contour not to the end of photos 17, 18, 19. 

Eye shaping (continued): 

9) Next, we stitch with a seam “back needle” along the contour between the iris and 

whites of the eyes photo 20. The eyes themselves are ready photo 21. 

10) Next, we make the upper eyelid according to photo 23-26. 

11) I show eyelashes from the photo of other eyes, but here it is only important 

principle of photo 27-27. 

Eye shaping (continued): 

The eyes are ready, we don’t make eyebrows yet. 

Now we select all the strings from the seamy side, tie the knots, 

cut off the ends. Try to keep the threads from pulling the head fabric. 

We tie the head. 

29th row – 6sc, 1dec, (12sc, 1dec) * 5, 6sc (78) 

30th row – (11sc, 1dec) * 6 (72) 

31 row – 5sc, 1dec (10sc, 1dec) * 5, 5sc (66) 

32 row – (9sc, 1dec) * 6 (60) 

33rd row – 4sc, 1dec, (8sc, 1dec) * 5, 4sc (54) 

34th row – (7sc, 1dec) * 6 (48) 

We begin to stuff our head evenly. 

35 row – 3sc, 1dec, (6sc, 1dec) * 5, 3sc (42) 

36th row – (5sc, 1 dec) * 6 (36) 

37 row – 2sc, 1dec, (4sc, 1inc) * 6, 2sc (30) 

38 row – (3sc, 1dec) * 6 (24) 

Fill your head tightly. 

39 row – (2sc, 1dec) * 6 (18)) 

40th row – (1sc, 1dec) * 6 (12), add filler one last time. 

41 row –6dec (6) 

Pull off the hole, fasten and cut the thread. 

Hook 1.0. Dial 6sc in the amigurumi ring 

1st row – inc * 6 (12) 

2nd row – 12sc (12) 

3rd row – (1inc, 1sc) * 6 (18) 

4-6 rows (3 rows) – 18sc (18) 

7th row – (1dec, 1sc) * 6 (12) 

Fasten the thread and leave the tip for sewing. Double ears, 

therefore, they must be sewn on the open edge before sewing. 

Head (continued): 

Santa Ears: 

We outline the places for sewing the ears, pin and sew, as 

shown in the photo. To prevent the ears from dangling, we grab them from behind 

stitch, stepping back about 1sc from the sewing line .. 

Ears for the Gnome: 

Ears for Santa (continued): 

1st row – we take the hook 1.25, 6sc in the amigurumi ring (6) 

2nd row – 6inc (12), 1pp, turn 

3rd row – 6sc, turn without lifting loop 

4th row – knit from the 2nd loop (skip 1sc) 5sc 

5th row – knit from the 2nd loop (skip 1sc) 4sc 

6th row – knit from the 2nd loop (skip 1sc) 3sc 

7th row – skip 1sc, 1dec, 1loop (do not turn any more), knit 

along the contour of the ear 11sc (12) 

We also knit the second ear, sew on. 

Jacket: 

If we knit a doll from a pekhorka openwork (280/50) crochet 1.0, then clothes 

crochet 1.25 from the same red yarn. 

If we knit a doll from a successful (220/50) crochet hook 1.25, then clothes and 

crochet shoes 1.5 (successful pekhorka 220 / 50g), i.e. hook on 

the size is larger than the knitted body. Then we will make a belt. 

We collect a chain of 26ch + 1 lifting loop We begin to knit from the second 

hook loops. The increase goes as if along the raglan of the sleeves in 4 points. 

In the 1st row, loops are indicated in red, which form lines raglan. 

1st row – 4sc, 1inc, 1sc, 1inc, 1sc, 1inc, 1sc, 1inc, 4sc, 1inc, 1sc, 1inc, 1sc, 1inc, 1sc, 1inc, 4sc (34) 2 lifting loops (pp) turn 

2nd row – 34DC (34) 2pp 

3rd row – 5DC, 1inc, 1DC, 1inc, 3DC, 1inc, 1DC, 

1inc, 6DC, 1inc, 1DC, 1inc, 3DC, 1inc, 1DC, 

1inc, 5DC (make DC increments) (42) 1pp 

twenty 

Jacket (continued): 

Note that in rows 4 and 5 we knit sc, not DC. 

4th row – 6sc, 1inc, 1sc, 1inc, 5sc, 1inc, 1sc, 1inc, 8sc, 1inc, 1sc, 

1inc, 5sc, 1inc, 1sc, 1inc, 6sc (50) 1pp 

5th row – 7sc, 1inc, 1sc, 1inc, 7sc, 1inc, 1sc, 1inc, 10sc, 1inc, 1sc, 

1inc, 7sc, 1inc, 1sc, 1inc, 7sc (58) 2pp 

6th row –8DC, 1inc, 1DC, 1inc, 9DC, 1inc, 1DC, 1inc, 12DC, 1inc, 1DC 

1inc, 9DC, 1inc, 1DC, 1inc, 8DC (increase is done by DC) (66) 2pp 

7th row – 9DC, 1inc, 1DC, 1inc, 11DC, 1inc, 1DC, 1inc, 14DC, 1inc, 

1DC, 1inc, 11DC, 1inc, 1DC, 1inc, 9DC (74) 2pp 

8th row – 10DC, 1inc, 1DC, 1inc, 13DC, 1inc, 1DC, 1inc, 16DC, 

1inc, 1DC, 1inc, 13DC, 1inc, 1DC, 1inc, 10DC (82) 2pp 

Try on a jacket, in row 9 you can knit DC or sc to adjust the size. 

9th row – 11sc, 1inc, 1sc, 1inc, 15sc, 1inc, 1sc, 1inc, 18sc, 1inc, 1sc, 

1inc, 15sc, 1inc, 1sc, 1inc, 11sc (90) 1pp 

10th row – 12sc, 1inc, 1sc, we collect a chain of 3 air loops, 

skip 19sc, 1sc, 1inc, 20sc, 1inc, 1sc, dial a chain of 3 

air loops, skip 19sc, 1sc, 1inc, 12sc (62) 2pp 

Further, we make all the increments DC, in the text I simply indicate pr. 

distribution is prohibited 

Jacket (continued): 

11th row – 62DC (62) 2pp 

12th row – 13DC, 1inc, 5DC, 1inc, 22DC, 1inc, 5DC, 1inc, 13DC (66) 

13th row – 14DC, 1inc, 5DC, 1inc, 24DC, 1inc, 5DC, 1inc, 14DC (70) 2pp 

14th row – 70DC (70) 2pp 

15th row – 15DC, 1inc, 5DC, 1inc, 26DC, 1inc, 5DC, 1inc, 15DC (74) ch 

16th row – 16DC, 1inc, 5DC, 1inc, 28DC, 1inc, 5DC, 1inc, 16DC (78) ch 

17th row – 78DC (78) 

Next, knit the sleeves in a circle. Photo of knitting the left sleeve, see below. 

1st row – On the left sleeve, we start the set along the bottom of the armhole from backs to the shelf: in the gap between the sleeves and the bottom of the armhole, we make a fastener and 1 air loop, 3sc along 

the bottom of the armhole, 1sc (in between between the rim of the sleeve and the bottom of the armhole), 19sc along the rim sleeves, 1sc in the gap between the sleeves and the bottom armholes (where the fastening and 1ch were made), connecting post, 2 lifting loops (24) 

Next, knit the sleeve in a circle, at the end of each row connecting column (sl-st) and 2 lifting loops (pp). 

2-4 rows (3 rows) – 24DC (24), 1sl-st 2pp 

5th row – 7DC, 1inc, 7DC, 1inc, 7DC, 1inc (27), 1sl-st, 2pp 

6th row – 8DC, 1inc, 8DC, 1inc, 8DC, 1inc (30), 1sl-st, 2pp 

Spread 

prohibited 

Jacket (continued): 

7th row – 30DC (30), 1sl-st 

On the right sleeve, we start the set from the bottom of the armhole up along the edge of the sleeve from the back: 

1st row – 1sc (in the interval between the cuff of the sleeve and the bottom of the armhole), 1ch, 19sc along the edge of the sleeve up, 1sc (in the interval between the sleeves and bottom of the armhole), 3sc at the bottom of the armhole, 1sc in the gap between the ridge of the sleeve and the bottom of the armhole (where the fastening was done and 1ch), connecting post, 2 lifting loops (24) 

2-7 rows – as for the left sleeve. 

We start tying with white yarn. I have Adelia yarn diamond, you can yarn like grass or Alize soft: 

1st row – We start on the left side of the right shelf from the neck about 19sc (if you tie in 1 row, then from 1 sc make 6 air loops for the first loop, after 7sc again 6ch, after 7sc 6ch more), 3sc into corner, 72sc down, 3sc into corner, 19sc on the left shelf, 1 lifting loop, turn. 

Jacket (continued): 

We turn knitting and make the 2nd row of strapping: 

2nd row – 19sc, 2sc in 1 loop, 1sc, 2sc in 1 loop, 76sc in hem, 2sc in 

1 loop, 1sc, 2sc in 1 loop, 4sc, 6ch for eyelet, 7sc, 6ch for 

loops, 7sc, 6ch for 1sc loops. Number of loops exactly may not coincide with my calculation, it’s okay, I give an approximate picture of the strapping. 

We knit a collar: 

The 1st and last posts of the gate are already occupied when we tied shelves, so we don’t count them. 

1st row – 1inc, 22sc, 1inc, (26) 1pp, turn, 

2 row -1inc, (5sc, 1inc) * 3 (30), 1pp, turn 

3rd row – 1inc, 28sc, 1inc (32), fasten and cut the thread. 

Tie the sleeves at the bottom sc. 

Match buttons by color and size and sew on. Hide all the strings with a needle. The jacket is ready! 

Now we will knit the belt with a pigtail of air loops with yarn in 2 additions. 

Try on the length of the pigtail in place. The ends of the belt can be worn 

white beads and tie knots. 

Hat for Santa and Gnome: 

For Santa, we begin to knit with red yarn, hook 1.25: 

1 row – 6sc in the amigurumi ring 

2nd row – 1inc * 6 (12) 

We knit all DC loops in a circular manner, make DC increments, at the end of each 

row to make a connecting post (sl-st) and 2 lifting loops (pp). 

Try on a hat on your head while knitting. 

3rd row – (3DC, 1inc) * 3 (15) 

4th row – 15DC (15) 

5th row – (4DC, 1inc) * 3 (18) 

6th row – 18DC (18) 

7th row – (5DC, 1inc) * 3 (21) 

8th row – (6DC, 1inc) * 3 (24) 

9th row – (3DC, 1inc) * 6 (30) 

10th row – (4DC, 1inc) * 6 (36) 

11th row – (5DC, 1inc) * 6 (42) 

12th row – (5DC, 1inc) * 7 (49) 

13th row – 49DC (49) 

14th row – (6DC.1inc) * 7 (56) 

15th row – (6DC, 1inc) * 8 (64) 

16-19 rows – 64DC 

For the Gnome, we knit a hat with stripes, the trimming is with grass yarn. 

Chef Hat: 

Cast on a chain of 68 chain stitches and close into a ring. 

1st row – 68sc (68) 2pp 

2-4 rows (3 rows) – 68DC (68) 

5th row – 68inc DC (136) 2pp 

6-8 rows (3 rows) – 136DC (136) 2pp 

9th row – (5DC, 1dec) *, 3DC (117) 2pp 

10th row – 117DC (117) 2pp 

11th row – 3DC, (4DC, 1dec) * 19 (98) 2pp 

12th row – (3DC, 1dec) * 19, 3DC (79) 2pp 

13th row – 3DC (2DC, 1dec) (60) 2pp 

14th row – (8sc, 1dec) * 6 (54) 

15th row – (7sc, 1dec) * 6 (48) 

16th row – (6sc, 1dec) * 6 (42) 

17th row – (5sc, 1dec) * 6 (36) 

18th row – (4sc, 1dec) * 6 (30) 

19 row – (3sc, 1dec) * 6 (24) 

20 row – (2sc, 1dec) * 6 (18) 

21 row – (1sc, 1dec) * 6 (12) 

Pull the loops, fasten the thread and cut. Tie a red hat on the bottom thread 1sl-st, 1ch. 

Tie the bottom of the hat with white yarn with single crochets (2sc, 1 skip loop) to the end of the row, knit 2 more rows all sc. 

You can grip the top of the hat a little with a thread and a needle so that there was a negligence effect, sew on a white pompom. 

Hat for Santa (continued): 

Cook for the Cook: 

We collect a chain of 60 air loops and close it in a ring. 

1 row -60sc (60) 

2nd row – (8sc, 1dec) * 6 (54) 

3 row -54sc (54) 

4th row – (7sc, 1dec) * 6 (48) 

5th row – 48sc (48) 

6th row – (6sc, 1dec) * 6 (42) 

7sc – 42sc (42) 

8th row – (5sc, 1dec) * 6 (36) 

9th row – 36sc 

You understand the principle, we make decreases through the row to the end, when it remains 6sc – Pull and secure the thread. Make wire frame to size cups with a long handle. Sew the cup to the frame. The handle can tie or grease with glue and wrap with yarn. 

We knit a scarf for the Chef in red. We collect the chain 75ch. 

1st row – 75sc 

Then in each row at the end we do not knit 5 loops and turn the knitting. So we knit until 5sc remains, close, fasten the thread and cut it off. 

For hair and beard, we use hair-tresses of the plait type. You can buy them at Aliexpress or at the Crafts Fair. You can use just yarn-dissolution. 

Ties are sold with a length of about 30cm. 

For hair and beard, cut a piece about 8-9cm long. Divide the weft very carefully into thin strands. 

Do not rush, do it very carefully so that the hair does not loosen up, but is separated by strands, as shown in the photo. First, draw a line of hair growth with a simple pencil over the forehead and along the temporo-occipital part. 

Sew the hair with a regular needle and sewing thread in the color of tres. 

We begin to sew at a point behind the right ear, going down along the drawn line: 

1) We fasten the thread and bring it to the starting point behind the right ear. 

2) Then we stick the needle back into the same point, and draw the tip side by side through 2 columns along the drawn line. A loop is formed at the starting point. We insert a lock of hair into it and tighten the thread with a needle. The strand should seem to slip inside. 

Hair and beard (tresses): 

Hair and beard (continued): 

3) With these stitches we sew the hair down along the drawn line, then along the 13th row from the neck, then up along the temporal part behind the left ear. 

4) After that, sew the strands over the forehead along the drawn line to the point from which you began to sew 1 row of hair. 1st row is ready. 

Step up to the crown of the 3rd row of loops and sew on the 2nd row of hair. 

5) Next, we outline the beard line with a simple pencil (about 6-7 rows from the neck) and sew locks along it in 2-3 rows, depending on how splendid the beard you want. I have a beard sewn into 3 rows. Here, between the rows in height there are 2 rows. 

Hair and beard: 

After the hair and beard are completely sewn on, put on 

a hat on a doll. Put on the hat so that the sewing line is not visible 

hair so that the eyebrows are visible. 

Sew the hat to the head with white thread, which was used to sew 

hair. Straighten your hair and beard and trim a little. 

Hair and beard for the Gnome (wool): 

Immediately I stipulate that a photo description of hair and beard using the felting method I 

I quote as an addition to the main master class. I do not pretend at all 

on the correctness of actions, just showing my version. 

The description uses wool for felting, bought at Aliexpress. 

Hair and beard for the Gnome (continued): 

1) Carefully divide the piece of wool by thickness, as in photo 1. 

2) Tear off a small piece of wool from the other end, shape beard, attach it to your face where you drew the beard line pencil, as in photo 2 and 3. 

3) Now try on, bend the beard over the face and bottom with a felting needle back and forth along the entire beard line, as picture 4. 

4) You should get it like in photo 3, only the beard is already rolled (fixed). If it’s a little thin, add some more wool and weld a little on top. Then just straighten with your hands so that the seam not visible (pull up the coat slightly, very lightly) 

5) In step 1, we divided the wool roll by thickness. 

We take this layer and apply it from above from the forehead to the back of the head, try on how 

in photos 5 and 6 along the width of the forehead and determined by the length. 

Next, the hair length that we have chosen is very careful trying 

“tear” from the main piece of wool. 

Hair and beard for the Gnome (continued): 

It’s not very easy, but you need to leave the torn edge, and not cut off with scissors. 

Now, along the line of the forehead and temporal part drawn with a pencil, we begin to roll with a needle for felting in reciprocating movements, as in photos 7 and 8. 

6) You should get as in photo 9. Next, you need to divide the thickness 

the entire layer of hair and lift the top layer to weld the bottom layer along 

nape lines, as in photo 10. 

The bottom layer can be thin, not scary. Then omit 

top layer to bottom. 

Pull the hair back a little at the ends to keep the length 

about the same. Smooth your hair and put on a beanie. 

Now decide on the length of your hair. I made a ponytail behind. Tip 

beards can be slightly moistened and curled with a wedge with your finger. Insert 

earring in the ear. The gnome turned out to be fashionable. 

Mittens for Santa: 

Hook 1.25, cast on 22 air loops, close the knitting in a circle. 

Then we knit in a circular fashion. 

1-5 rows (5 rows) – 22sc (22) 

6 row – 11sc, increase from 1 loop 5DC, 10sc (26) 

7th row – 26sc (26) 

8th row – 11sc, 5DC decrease in 1 loop, 10sc (22) 

9-11 rows (3 rows) – 22sc (22) 

12th row – (9sc, 1dec) * 2 (20) 

13 row – (8sc, 1dec) * 2 (18) 

14th row – 9dec (9) 

15th row – 4dec, tighten, fasten the thread, cut. 

We tie the top of the mittens with white yarn, starting with the back 

sides (opposite the finger). At the end of the row we make a connecting 

a column and a chain of 6 air loops. We attach the chain to the back 

parts of the sleeve strapping, we fix and cut the thread. 

Boots for Santa: 

We knit the boots in the color of Santa’s sweater. Hook 1.25, try to knit 

tight. We begin to knit with white yarn (yarn of the same type as on 

boots, i.e. I have an openwork pekhorka). We dial the 8ch chain, start with 

2nd loop from the hook. 

1st row – 1inc, 5sc, 4inc in 1 loop, 5sc, 1inc (18) 

2nd row – 2inc, 6sc, 3inc, 6sc, 1inc (24) 

3rd row – (1inc, 1sc) * 2, 1inc, 5sc, (1inc, 1sc) * 2, 1inc, 6sc, 1inc, 1sc, 1inc (32) 

4th row – (1sc, 1inc) * 3, 8sc, (1inc, 1sc) * 3, 1inc, 8sc, 1inc, 1sc, 1inc (41) 

5th row – (1sc, 1inc) * 3, 12sc, (1inc, 1sc) * 3, 1inc, 16sc (48) 

Cut the fleece insole to fit your foot. 

6 row-48sc for the front p / loop (if we knit on the wrong side), for the back p / 

loop (if we knit on the front side) (48) 

Change the color of the yarn to the color of the sweater, do not cut the white thread, leave it 

outside of the foot to tie the boot edging later. 

7-8 rows – 48sc (48), at the end of the 8th row we knit 5 alignment loops, 

place the marker exactly in the middle of the heel. 

Let’s go back to the white sole and make the strapping of the boot sole with thread 

white (the thread that we left was not cut off) – knit for 

front stitches 6 row 48sc, fasten and cut the thread, tighten 

inside the boot. We glue the insole. 

Boots for Santa: 

9th row – 46sc, 1dec (47) 

10 row – 1dec, 45sc (46) 

11th row – 46sc (46) 

We very carefully hide all the ends of the threads inside the sole and glue 

insole. We begin to shape the foot. 

12th row – 9sc, 14decDC for the back p / loop, 9sc (32) 

13th row – 9sc, 7decDC for the front p / loop, 9sc (25) 

Boot slits on the outside (not on the inside). 

14 row – 19sc, 2 lifting loops, we turn knitting, then 

we knit with rotary rows DC, at the end of each row 2 pp 

For the boot on the right foot: 

15th row – 18DC, 1 decDC for a full loop, 5DC, 2 lifting loops (24) 

16-18 row – 24DC (24), fasten the thread and cut it off. 

The result is a boot on the right leg. 

For the boot on the left foot: 

1-13 row – like the right boot 

Boots for Santa (continued): 

14th row – 7sc, 2 lifting loops, turn knitting, then knit 

turning rows DC, at the end of each row 2 pp 

15th row – 5DC. 1decDC per full loop, 18DC (24), 

16-18 rows – 24DC (24), fasten the thread and cut it. 

Now you need to tie the boots with a white thread: all sc to the end. 

I used the same thread as the Alize Decofur Fancy jacket white. 

Start with the right boot at the point between the cuts in the bootleg. We do fasten and go along the cut of the bootleg up 4sc, in the corner loop we make 3sc, continue to tie the top of the boot 23sc, do 5-6 air loops for the eyelet, go down the cut 4-5sc, connecting post, fasten and cut the thread. 

We tie the left boot in the same way, only we make a loop on the other bootleg. 

Sew on a button and fasten with a loop. 

A bag with presents: 

We knit in red, hook 1.25. 

1st row – 6sc in the amigurumi ring 

2nd row – 6inc (12) 

3rd row – (1sc, 1inc) * 6 (18) 

4th row – (2sc, 1inc) * 6 (24) 

5th row – (3sc, 1inc) * 6 (30) 

6th row – 2sc, 1inc, (4sc, 1inc) * 5, 2sc (36) 

7th row – (5sc, 1inc) * 6 (42) 

8 row -3sc, 1inc, (6sc, 1inc) * 5, 3sc (48) 

9 row – (7sc, 1inc) * 6, 2 lifting loops (54) 

Then we knit all the DC rows in a circle to the height you like. 

After that, we tie the edges of the bag with white yarn (the same as 

tied the edges of the jacket), make a loop for the bag 

hang on the handle. Tie a chain of air loops for 

strings, insert string between DC, fill lightly bag 

filler and tie a string. 

You can embroider snowflakes or sew on white beads on the bag! 

Dress up your doll. First, hang the loop of the bag on the handle, then put on 

mittens. Tie the belt and straighten the jacket under it. 

I drew the mouth with special markers on brown fabric 

colors. rouge the cheeks and nose. If your glasses don’t look good on your face, wear 

them over the eyebrows on the cap. 

Assembly and decoration of dolls: 

Dwarf and Chef Slippers: 

Slippers for the Dwarf and the Chef fit the same. 

We knit in red, hook 1.25. 

1st row – 6 loops in the amigurumi ring (6) 

2nd row – 1inc * 6 (12) if you want more elongated socks of shoes you can 

add 1-2 rows of 12sc. 

3rd row – (1inc, 3sc) * 3 (15) 

4th row – 15sc (15) 

5th row – (1inc, 4sc) * 3 (18) 

6th row – 18sc (18) 

7th row – (1inc, 2sc) * 6 (24) 

8 and 9 rows – 24sc (24) 

10th row – (1inc, 3sc) * 6 (30) 

11 – 14 rows (4 rows) – -30sc (30) We tied the toes of the shoes. IN 

at the end of the 14th row 1 lifting loop (pp), turn 

From the 15th row, we begin to knit the side of the shoes in rotary rows. 

15-19 rows (5 rows) – 24sc, 1loop, turn the canvas (24) photo1 

Gnome and Cook’s Slippers (prod.): 

We begin to knit the heel of the shoe. Mentally divide 24 loops 

as if into 3 parts of 8 loops: two side parts and one middle part. 

Row 20 – 15sc, 1dec (16 and 17 loops together), turn without lifting loop 

21 row – skip 1sc, 7sc, 1dec (i.e. we knit the 8th sc together with 1sc of the side part), turn without loop Fig. 2, 3, 4 

22 row – skip 1sc, 6sc, 1dec (i.e. we knit the 7th sc together with 1sc of the side part), turn without pp 

23rd row – skip 1sc, 5sc, 1dec (i.e. we knit the 6th sc together with 1sc of the side part), turn without pp 

Thus, the heel is formed. 

24 row – skip 1sc, 4sc, 1dec (i.e. knit the 5th sc together with 1sc of the side part), turn without pp 

In the next rows, we no longer skip 1sc at the beginning of the row, we knit 

immediately into the 1st sc and at the end of each row we make 1 lifting loop (so as not to lose the 5th loop) 

25 – 32 rows –4sc, 1 dec (ie 5th sc we knit with 1sc side part), 1p. 

When we finish knitting the backdrop, we do not cut the thread. We tie the top 

shoes: 1sl-st, 1ch. 

The toe of the shoe can be bent and sewn, a pompom can be sewn on top or 

buttons. See below for options for decorating shoes. 

To decorate shoes, you can use pom-poms (I bought at 

Aliexpress) or buttons to match the suit color. 

Gnome and Cook’s Slippers (prod.): 

How to make stripes on pants: 

We make stripes on the panties according to the same principle as the iris near the eyes: 

we knit pigtails from air loops and fix them. 

The post Santa Claus and Christmas Gnome Amigurumi Free Pattern appeared first on En.amigurumitariflerim.com.

Abbreviations:

mr – magic ring 

dc – double crochet (US – single crochet) 

dec – decrease by double crochet two stitches together 

ch – chain 

st – stitch 

sts – stitches 

slst – slip stitch 

Picot – 2ch, slst into 2nd ch from hook.

PATTERN

Head (skin color)

1 6SC into magic ring 6

2 İNC * 6 12

3 (İNC, 1SC) * 6 18

4 (İNC, 2SC) * 6 24

5 (İNC, 3SC) * 6 30

6 2SC, (İNC, 4SC) * 5, İNC, 2SC 36

7 (İNC, 5SC) * 6 42

8 3SC, (İNC, 6SC) * 5, İNC, 3SC 48

9 (İNC, 7SC) * 6 54

10 4SC, (İNC, 8SC) * 5, İNC, 4SC 60

11-20 60SC 60

21 4SC, (DEC, 8SC) * 5, DEC, 4SC 54

22 (DEC, 7SC) * 6 48

23 3SC, (DEC, 6SC) * 5, DEC, 3SC 42

24 (DEC, 5SC) * 6 36

25 2SC, (DEC, 4SC) * 5, DEC, 2SC 30

26 (DEC, 3SC) * 6 24

27 (DEC, 2SC) * 6 18

28 18SC 18

We insert safe eyes between rows 16 and 17 at a distance of 7 columns from each other.

Embroider a spout in the middle. Fill tightly and set aside.

Beanie (cherry color)

We collect a chain of white inc 61 loops, start with 2 loops from the hook

1-10 60SC, on the last column we change the color to cherry 60

11 (8SC, DEC) * 6 54

12-16 54SC 54

17 (7SC, DEC) * 6 48

18-22 48SC 48

23 (6SC, DEC) * 6 42

24-26 42SC 42

27 (5SC, DEC) * 6 36

28-30 36SC 36

31 (4SC, DEC) * 6 30

32-34 30SC 30

35 (3SC, DEC) * 6 24

36-38 24SC 24

39 (2SC, DEC) * 6 18

40-42 18SC 18

43 (1SC, DEC) * 6 12

44-46 12SC 12

47 DEC * 6 6

Tighten the hole, tie a chain of white inc for a pompom.

Pompom (white knit)

1 İNTO MAGİC RİNG 6SC 6

2 İNC * 6 12

3 (1SC, İNC) * 6 18

4-5 18SC 18

6 (1SC, DEC) * 6 12

7 DEC * 6 6

Tighten the hole, insert to the chain. Fold in half a lapel of a hat and inc

a button (wooden or decor as you wish).

2pcs legs

We start knitting with boots (cherry color), we fill the boots tightly, legs more

free. We collect a chain of 10CH, start knitting with 2 loops from the hook:

1 8SC, 3SC in 1 loop, 7SC, İNC 20

2 İNC, 7SC, 3İNC, 7SC, 2İNC 26

3 İNC, SC, 7SC, (İNC, SC) * 3, 7SC, (SC, İNC) * 2 32

4 İNC, 2SC, 7SC, (İNC, 2SC) * 3, 7SC, (2SC, İNC) * 2 38

5 İNC, 3SC, 7SC, (İNC, 3SC) * 3, 7SC, (3SC, İNC) * 2 44

6 Change the color to brown and knit the rear loops 44SC 44

7-9 44SC 44

10 13SC, (DEC, SC) * 6, 13SC 38

11 11SC, (DEC, SC) * 5, 12SC 33

12 9SC, (DEC, SC) * 4, 9SC, DEC 28

13 (2SC, DEC) x7 21

14-15 21SC (in the last column we change to cherry color) 21

16 We knit for the back wall of the loop 21SC 21

17 21SC 21

18 (5SC, DEC) * 3 18

19-20 White 18SC 18

21-22 Cherry Blossom 18SC 18

23-24 White 18SC 18

25-26 Cherry Blossom 18SC 18

27-29 Knit in cherry color for the front wall 18SC (close) 18

27 Behind the flesh-colored 18SC 18

28-29 18SC 18

30 7SC, DEC, 7SC, DEC 16

31-44 16 SC 16

This is if you knit a boy. If you knit a girl, then do not change the color, but inc

knit on 18 SC, changing through 2 rows white and cherry color. Do not cut the thread at the second leg,

and inc continue by typing 4CH – inc connect 2 legs. Knit in the main color.

1 16SC (1 leg), 4SC (chain), 16SC (2 leg),

4SC (chain)

40

2 (5SC, İNC) * 6 46

3-5 46SC 46

6 SC, 1İNC, 19SC, 1İNC, 24SC 48

7-13 48SC on the last column change the color to cherry 48

14-15 48SC (14 row knit for the back wall) 48

16 (5SC, DEC) * 6 42

17-21 42SC 42

22 (4SC, DEC) * 6 36

23-25 ​​36SC 36

26 (3SC, DEC) * 6 30

27-29 30SC 30

30 (2SC, DEC) * 6 24

31-33 24SC 24

34 (1SC, DEC) * 6 18

Cuffs on batinki (white knit)

1 (3SC, İNC) * 7 behind the front wall 28

2-8 28SC, finish, bend, incwrite. 28

Hands (2PCS) (flesh color)

We do not fill much, leave the top free.

1 İNTO MAGİC RİNG 6SC 6

2 İNC * 6 12

3 (1SC, İNC) * 6 18

4-6 18SC 18

7 16SC, DEC 17

8 7SC, DEC, 7SC, (POPCORN) 16

9 14SC, DEC 15

10 DEC, 13SC 14

11 6SC, DEC, 6SC 13

12 11SC, DEC 12

13 12SC 12

14 (3SC, İNC) * 3 Change the color to cherry 15

15 15SC, İNC behind the rear wall of the hinge 16

16-28 16SC 16

29 (6SC, DEC) * 2 14

30 (5SC, DEC) * 2 12

31 (4SC, DEC) * 2 10

32 DEC * 5, close

CUFF (white tie) fasten to the remaining loops on

15 row

1 (2SC, İNC) * 5 20

2-6 20SC, finish, bend inc write. 20

İncish to the body and fix the head. So that she does not swing, we knit a scarf of 2 neck sizes

additions. I got 10CH, then 9SC. rotary rows. Scarf should

be exactly on the neck.

Knickers (brown color)

PANTS – 2pcs (chain 31CH, with 2 loops from the hook)

1-7 30SC (we knit in rotary rows) 30

8 30SC right; 30SC left 60

9 2SC, DEC, (4SC, DEC) * 9.2SC 50

10-15 50SC 50

16 5SC, DEC, 25SC, 1DEC, 16SC 48

17-19 48SC 48

20 (6SC, DEC) * 6 42

21-22 42SC 42

23 42SC, close. 42

Stitch – incam on the doll, the seam should be on the back in the center.

We knit 2 straps: 31CH, from the second loop from the hook 30SC. İncish to the belt.

Fasten the buttons.

We decorate a sweater and shoes with a decor of cotton balls.

If you have a girl, you can fix her hair from inc.

The hat is inscribed to the head. We embroider cilia. We draw powder cheeks.

The post Christmas Elf Amigurumi Free Crochet Pattern appeared first on En.amigurumitariflerim.com.

Santa Claus Free Pattern

ABBREVIATIONS

Ch: chain

Sc: single crochet

İnc: 2sc in the next st(increase)

dec: sc next 2sts together (decrease)

Dc: Double crochet

Hdc: (half double crochet)

Sl-st : slip stitch

Sc3tog( single crochet 3 together) (…)* repetition

PATTERN

ARM 2x  

Start with beige 

1: 6 sc in magic ring [6]  

2: inc [12]  

3-5: 12 sc [12]  

Change colour to white  

6:12 sc [12]  

7:12 sc BLO [12]  

Change colour to red  

8-9:12 sc BLO [12]  

10-24: 12 sc [12]  

25: join the two sides and make 6 sc to close the arm. 

LEG 2x 

Start with black  

1: 6 sc in magic ring [6]  

2: inc [12]  

3: (sc, inc) [18]  

4: (2 sc, inc) [24]  

5: (3 sc, inc) [30]  

6:30 sc BLO[30]  

7-9: 30 sc [30]  

10: 9 sc, 6 dec, 9 SC [24]  

11: 6 sc, 6 dec, 6 SC [18]  

12-14: 18 sc [18] 

Change to white  

15:18 sc [18]  

16:18 sc BLO [18] Change to red  

17-18: 18 sc BLO [18]  

19-21:18 sc [18]  

22:(2 sc, inc) [24]  

23:24 sc [24]  

24: (3 sc, inc) [30]  

Fasten off the first and don’t cut the second leg yarn 

BODY  

Join the two legs with a sl st. Continue the rows.  

25-26: 60 sc [60]  

27: (8 sc, dec) [54]  

28:54 sc [54]  

29:07 sc, dim) [48]  

30:48 sc [48]  

31: (6 sc, dec) [42]  

32:42 sc [42]  

33: (5 sc, dec) [36]  

34: 22 sc, change to black , 14 sc [36]  

35: 22 sc, change to red, 14 sc [36]  

36-38: 36 SC [36]  

39:(4 sc, dec) [30]  

40-41:30 SC [30]  

42: (3 sc, dec) [24]  

43-44: 24 sc [24]  

45: (2 sc, dec) [18]  

46:18 sc [18]  

47:18 SC [18]  

fasten the arms in this row. 

HEAD  

Change the colour to beige  

48:18 SC BLO [18] 

49:(2 sc, inc) [24] on the leftover handle from the previous row  

50: (3 sc, inc) [30]  

51: (4 sc, inc) [36]  

52: (5 sc, inc) [42]  

53: (6 sc, inc) [48]  

54: (7 sc, inc) [54]  

55: (8 sc, inc) [60] 

56-63: 60 SC [60]  

64: (8 sc, dec) [54]  

65: (7 sc, dec) [48]  

66: (6 sc, dec) [42]  

67: (5 sc, dec) (36]  

68: (4 sc, dec) [30]  

69: (3 sc, dec) [24]  

70: (2 sc, dec) [18]  

71: (1 sc, dec) [12]  

72: dec [6]  

Fasten of and make a inverse magic ring. 

BEARD  

1:18 ch, 1 ch, turn [18] 

2:(2 sc, inc), 1 ch, turn [24]  

3: 24 sc, 1 ch, turn [24]  

4: (3 sc, inc), 1 ch, turn [30]  

5:30 sc 1 ch, turn [30]  

6:(4 sc, inc), 1 ch, turn [36]  

7:4 dc in the same st, sl st[90]  

Fasten off and leave a long tail. 

MOUSTACHE 2x  

1: 8 ch [8]  

2:2 sl st, 3 sc, 2 dc [8]  

Fasten off nas leave a long tail. 

SANTA CAP  

1:6 sc in magic ring [6]  

2: (1 sc, inc) [9]  

3: 9 SC [9]  

4: (2 sc, inc) [12]  

5:12 sc [12]  

6: (3 sc, inc) [15]  

7:15 sc [15]  

8: (4 sc, inc) [18]  

9:18 sc [18]  

10: (5 sc, inc) [21]  

11:21 sc [21]  

12:(6 sc, inc) [24]  

13: 24 sc [24] 

14: (3 sc, inc] [30]  

15:30 sc [30]  

16:04 sc, inc) [36]  

17:36 sc [36]  

18: (5 sc, inc) [42]  

19:42 sc [42]  

20:(6 sc, inc) [48]  

21-22:48 SC [48]  

23: (7 sc, inc) [54]  

24: (18 sc, inc) [57]  

Change to white  

25-27:57 sc BLO [57]  

28:57 sc [57]  

Fasten off 

CAP’S BALL  

1: 6 sc in magic ring [6]  

2: inc [12]  

3-4: 12 sc [12]  

4: dec [6]  

5: inverse magic ring  

Fasten off nas leave a long tail. 

SEW 

Embroider the eyes, eyebrow, nose and belt buckle. Sew the white ball on  the Santa cap. Then sew the beard, mustache and hat. 

The post Amigurumi Santa Claus Free Pattern appeared first on En.amigurumitariflerim.com.

Santa Claus 

You will need 

acrylic yarn (Children’s novelty “Pekhorka”) colors: red, flesh, black, white, hook No. 2, holofiber filler, For beard and hair, wool for felting, plastic eyes. Decorations for buckles. 

Abbrevations: 

Sc-single crochet. 

Ch – chain 

HDC half double crochet. 

Inc-increase in single crochet. 

Dec-decrease in single crochet. 

HEAD. 

Flesh-colored thread 

1p.6sc in the amigurumi ring. (6) 

2nd row: 6inc (12) 

3rd row: (1sc .inc.) 6pz (18) 

4th row: (2sc .inc) 6 times (24) 

5th row: (3sc .inc.) 6 times (30) 

6 row-30sc. 

7th row: 9sc. 3inc, 5sc, 3inc, 10sc. (36) Cheek formation. 

8th row: 9sc, 1inc, 1sc, 1inc, 1sc, 1inc, 7sc, 1inc, 1sc, 1inc, 1sc, 1inc, 10sc. (42) 

9-11 row: 42sc. 

12 row: 9sc, 1dec, 1sc, 1dec, 1sc, 1dec, 7sc, 1dec, 1sc, 1dec, 1sc, 1dec, 10sc. (36) 

13th row: 9sc, 3dec, 5sc, 3dec, 10sc (30) 

14th row: 9sc, 3inc, 5sc, 3inc, 10sc. (36) 

15th row: 9sc, 1inc, 1sc, 1inc, 1sc, 1inc, 7sc, 1inc, 1sc, 1inc, 1sc, 1inc, 10sc (42) 

16-18 row: 42sc. Stamp in the course of knitting. 

19 row: (5sc, dec) 6 times (36) 

20 row: (4sc.dec) 6 times (30) 

21 row: (3sc .dec) 6 times (24) 

22 row: (2sc.dec) 6 times (18) 

23rd row: (1sc, dec) 6 times (12), 

Row 24: 6dec. Finish knitting. This will be head up. 

Hands (2pcs) 

Knit in flesh color, 8 pcs of fingers. 

1st row: in the ring amigurumi 5sc. 

2-4 row: 5sc. 

We connect the fingers in the palm. 

1st row: 3sc 1 toes, 2sc 2 toes, 5 sc 3 toes, 3sc 2 toes, 2sc 1 toes. (15) 

Row 2-3: 15sc. 

For the left hand: 

4th row: 1sc, attach the 4th finger – 3sc grabbing the loops of the finger and palm, 11sc. (15) 

5th row: 1sc, 2sc of the 4th finger, 11sc (14) 

For the right hand: 

4th row: 4sc, 3sc capturing the loops of the 4th finger and palm, 8sc (15) 

5th row: 4sc, 2sc 4th finger, 8sc (14) 

6th row: 14sc. Fill in the fingers and palm. 

7th row: 2sc, dec, 2sc, dec, 2sc, dec, 2sc (11) 

Row 8: Attach a red thread and knit behind the back half loop (11) 

9th row: 2sc, inc, 2sc, inc, 2sc, inc, 2sc (14) 

10-18 row: 14 sc. 

19 row: 2sc, dec, 2sc, dec, 2sc, dec, 2sc (11) Fill in the part. 

20 row: 1sc, dec, 1sc, dec, 1sc, dec, 1sc (8) 

Finish knitting, leave the thread for sewing. Pull the hole. 

Cap. 

Dial a chain of 42 ch in white. 

1-3 row: 42 sc. 

4th row: In red -42sc. 

5th row: (5 sc, dec) to the end of the row (36) 

6th row: 36sc. 

7th row: (4sc, dec) to the end of the row (30) 

8th row: 30sc. 

9 row: (3 sc, dec) to end of row (24) 

10-12 row: 24sc. 

13 row: (3 sc, dec) to end of row (20) 

14-15 row: 20sc. 

16th row: (3sc, dec) to the end of the row (16) 

17-18 row: 16sc. 

19 row: (3 sc, dec) 3 times, 1sc (13) 

Row 20-21: 13sc. 

22 row: (2sc, dec) 3 times, 1 sc (10) 

Row 23: 10sc. 

24th row: (1sc, dec) 3 times, 1sc (7) 

25 row: dec. 

Finish knitting, cut off the thread, remove. Sew on the pompom. 

legs-torso. 

We knit shoes in black. 

1st row: Dial a chain of 8 ch. 

2nd row: 6sc, 3sc in 1 loop, on the other side 5sc, inc (16) 

3rd row: inc, 5sc, inc x 3 times, 5sc, inc x 2 times. (22) 

4th row: inc, 6sc, inc x 6 times, 6sc, inc x x 3 times. (32) 

5th row: 32sc for the back half loop Cut out the sole from cardboard or plastic. 

6-7 row: 32sc. 

8th row: 10sc (, dec x 6 times), 10sc (26) 

9th row: 9sc, (decx4 times), 9sc (22) 

10th row: 6sc, (dec x 4 times), 6sc (18) 

11th row: 6sc, (decx2 times), 8sc (16) 

12-16 row: 16sc. 

Change color to red 

1st row: for the back half loop 16sc. 

Row 2-8: 16sc. 

We knit the second leg in the same way, only we do not cut the thread, but connect both legs 3sc. Cut the thread. We knit along the way. 

Begin to knit the torso, fold the blank in half and attach the thread to the right side, retreating 2 loops towards the front. 

9th row: (1sc, inc) x6 times (this is the tummy), 3sc-side, 12inc (this is the butt), 3sc-side (48) 

10-11 row: 48sc. 

13th row: for the back half-loop -48sc. 

14th row: (decx8 times), 24sc (40) 

15th row: 40sc. 

16th row: (8sc, dec) x4 times (36) 

17th row: 36sc. 

18th row: (4sc, dec) x6 times (30) 

19-20 series: 30sc. 

21 row: (3sc, dec) to the end of the row (24) 

22-23 series: 24sc. 

24 row: (2sc, dec) to the end of the row (18) 

25th row: 18sc. 

26 row: (2sc, dec) to the end of the row (12) 

We change the thread to bodily. 

27 row: for the back half loop 12sc. (This is the neck) 

Row 28: 12sc.  

Finish knitting, leave the thread for sewing. 

Return to the first row (red for the back half loop) attach white. 

1-2 row: 16hdc. 

Back to row 13, in red: 

Row 1-2: 48sc. 

3rd row: White-48sc. 

Return to row 27, white, attach to the middle of the front (knit a collar) 

1st row: (1hdc, inc hdc) to the end. 

Assembly. 

Strap.Brown color. 

Cast on a 48ch chain, close to the ring and knit 

1 row -48sc. Until the head is sewn, put on through the strap up. Attach the buckle. 

Nose. 

1st row: 6sc in the amigurumi ring. 

2nd row: 6sc. 

You can fill the nose a little, sew on at about the 11th row. 

Open a paper clip, insert the blunt end into the neck, and the sharp ends into the head. Sew on the head. Sew on the sides of the arms. 

Attach a beard, mustache, hair like a fringe from wool for felting or from thick yarn. 

Put on a cap. Well, our Santa Claus is ready 

The post Santa Claus Amigurumi Free Crochet Pattern appeared first on En.amigurumitariflerim.com.

Abbreviations

Mr = Magic ring

sc = single crochet

inc = Increase

dec = decrease

sl-st = slip-stitch

dc =double crochet

Please note that the legs

fit in different ways!

PATTERN

First leg:

Start in red.

1st row: 6sc into magic ring

2nd row: inc into magic ring waiting for the loop (12sc)

3rd row: (1sc, inc) * 6 (18sc)

Next, prepare the insoles. On the sheet

circle the outsole, cut, and

for this pattern of plastic

make round insoles for shoes.

(In this toy, insoles are used

sole sole only,

the toy is not worth it yourself, as

the cap outweighs. Therefore their

availability is optional).

4th row: behind the back wall of the 18sc loop

5-6 rows: 18sc (2 rows)

Insert the plastic insole inside.

7 row: 6dec, 6sc (12sc)

8 row: 12sc

Change the color to green:

9 row: (1sc, inc) * 6 (18sc)

10-11 rows: 18sc (2 rows)

Make slst. Finish knitting, thread

fasten and cut.

Second leg:

Start in red.

1st row: 6sc into magic ring

2nd row: inc into magic ring waiting for the loop (12sc)

3rd row: (1sc, inc) * 6 (18sc)

4th row: behind the back wall of the 18sc loop

5-6 rows: 18sc (2 rows)

Insert the plastic insole inside.

7 row: 6sc, 6dec (12sc)

8 row: 12sc

Change the color to green:

9 row: (1sc, inc) * 6 (18sc)

10-11 rows: 18sc (2 rows)

On the second leg, knit another 20sc,

but do not cut the thread, but continue

knit the body. Put your legs close

check that the decavings are exactly

in front.

12 row: attach the second leg to

the first leg where they finished knitting

(into the loop following the slst), knit

18sc for the first part, then 18sc for

second part (36sc)

In this place you need to install

marker (marker is in front).

13 row: (5sc, inc) * 6 (42sc)

14-19 rows: 42sc (6 rows)

20 row: (5sc, dec) * 6 (36sc)

21-22 rows: 36sc (2 rows)

23 row: 2sc, dec, (4sc, dec) * 5, 2sc (30sc)

24-25 rows: 30sc (2 rows)

At this stage, you need to transfer the marker, for this, knit another 8sc

(or other necessary amount) so that it is exactly on the side, and change

color on white. Now here will be the beginning of the series.

26 row: behind the rear wall of the 30sc loop

27 row: 30sc

28 row: (3sc, dec) * 6 (24sc)

29-30 rows: 24sc (2 rows)

31 row: 1sc, dec, (2sc, dec) * 5, 1 sc (18sc)

Change the color to beige:

32 row: 18sc

33 row: inc into magic ring each loop (36sc)

34 row: (5sc, inc) * 6 (42sc)

35 row: 3sc, inc, (6sc, inc) * 5, 3sc (48sc)

36-44 rows: 48sc (9 rows)

45 row: 3sc, dec, (6sc, dec) * 5, 3sc (42sc)

46 row: (5sc, dec) * 6 (36sc)

47 row: 2sc, dec, (4sc, dec) * 5, 2sc (30sc)

48 row: (3sc, dec) * 6 (24sc)

49 row: 1sc, dec, (2sc, dec) * 5, 1sc (18sc)

50 row: (1sc, dec) * 6 (12sc)

Fasten and cut the thread, leaving a long tip with which

tighten the remaining hole.

Hide the tail of the thread inside the head.

Spout:

Tie in beige, lightly fill:

1st row: 6sc into magic ring

2 row: inc into magic ring each loop (12sc)

3rd row: 6 dec (6sc)

Fasten the thread, cut, leaving a long end for sewing.

Pens:

Tie the two pieces together, knit in a knitting process. Fill tightly only

lower part, then fill medium, the upper part does not need to be filled.

Start in red:

1st row: 6sc into magic ring

2 row: inc into magic ring each loop (12sc)

3-5 rows: 12sc (3 rows)

6 row: (4sc, dec) * 2 (10sc)

Change the color to white:

7-11 rows: 10sc (5 rows)

12 row: (3sc, dec) * 2 (8sc)

13-15 rows: 8sc (3 rows)

Fold the edges of the part together, knit

4sc. Fasten the thread, cut, leaving

long end for sewing.

Design and assembly:

Sew the handles symmetrically on the sides,

previously securing them with pins.

Sew eyelets between 39 and 40

(the distance between them is 2

sc), embroider the eyebrows with the same thread.

Sew a nose under the eyes.

Next, make a beard. For this from

Alize Softy Yarn Cook 19

lengths of 12cm. Fasten them with

using the hook on row 38 (see

a photo). I got 7 pcs with

both sides of the nose and 5 pcs under the nose

(for density you can add another row

below). Trim your beard.

Cap:

In white, dial a chain of 44 ch and use slst to close it in a circle.

1 row: 2 ch lift, 44DC, slst (44dc)

2 row: 1 ch lift, 44sc, slst (44sc)

Change the color to red.

Further, each row of the cap begins with a 2 ch rise and ends with a slst.

3rd row: behind the front wall of the 44DC loop

4-5 rows: 44DC (2 rows)

6 row: (20DC, dec) * 2 (42dc)

7 row: 10 DC, dec, 19DC, dec, 9DC (40dc)

8 row: (18DC, dec) * 2 (38dc)

9 row: 9DC, dec, 17DC, dec, 8DC (36dc)

10 row: (16DC, dec) * 2 (34dc)

11 row: 8DC, dec, 15DC, dec, 7DC (32dc)

12 row: (14DC, dec) * 2 (30dc)

13 Series: 7DC, dec, 13DC, dec, 6DC (28dc)

14 row: (12DC, dec) * 2 (26dc)

15 row: 6DC, dec, 11DC, dec, 5DC (24dc)

16 row: (10DC, dec) * 2 (22dc)

17 row: 5DC, dec, 9DC, dec, 4DC (20dc)

18 row: (8DC, dec) * 2 (18dc)

19 row: 4DC, dec, 7DC, dec, 3DC (16dc)

20 row: (6DC, dec) * 2 (14dc)

21 row: 3DC, dec, 5DC, dec, 2DC (12dc)

22 row: (4DC, dec) * 2 (10dc)

Amigurumi23 row: 2

The post Little Santa Claus Amigurumi Free Pattern appeared first on En.amigurumitariflerim.com.

Abbreviations:

SC – single crochet

İNC – increase

DEC – decrease

CH – chain

DOUBLE İNC- 3 sc in one loop

Necessary materials

For Santa

1. For the body, flesh-colored, I have YarnArt Jeans (160m in 50g) divided

in half (obtained in 100g-640m), hook 1.25

2. Clothing – Semenovskaya “Lydia” in three additions (50% wool, 50% acrylic in

100g-1613m) (obtained in 100g-540m) red or burgundy.

3 A little white boucle on the decoration of clothes, I have Alpina Baby (50g210m).

4.Little black yarn for mittens and boots YarnArt Jeans divided

in half.

5. filler

6. a little wool for felting white for hair and eyes, a little bit

red and black for the mouth and pupils, a needle for felting.

7.for belt: cardboard, piece of leather, shiny ribbon for decoration

buckles, glue. Wire for the frame.

For a horse:

1.I have YarnArt Jeans brown for a horse and a little gray for

muzzles (55% cotton 45% acrylic (50g, 160m)) divided in half. (in 100g640m),

2. A little red YarnArt Jeans (50g-160m, halved) for a bag with

giveaways.

3. A little black YarnArt Jeans (50g-160m divided in half) for hooves.

4. Filler.

5. a little wool for felting white and gray for eyes, mane,

tail and a little black for the pupils.

6. Ribbon for ties and rhinestones on the bag.

7. Wire for the frame.

Santa:

NOSE

flesh-colored hook 1.25 1. type 6 ch.

2.in the 2nd loop from the hook 1sc, 3sc, double inc (from one pole. Knit

3sc), on the other side of the tiptoe 4sc. (11)

3.inc., 3sc, inc., 1sc, inc., 3sc, inc. (15)

4.2sc, inc., 3sc, inc., 2sc., Inc., 5sc. (18)

5. (inc., 2sc) -6 times (24)

6. (inc., 3sc) -6p (30)

7. (inc., 4sc) -6p (36)

8-11. 36sc

12. (dec, 4sc) -6 times (30)

13.6sc (dec) -6 times, 12sc (24)

Knit with flesh-colored yarn.

The body from the crown to the legs is knitted in one piece, only shoes are sewn.

HEAD

6 SC İNTO MAGİC RİNG

1.6 inc. (12)

2. (1sc, inc.) – 6 times (18)

3. (2sc, inc.) – 6 times (24)

4. (3sc, inc.) – 6 times (30)

5. (4sc, inc.) – 6 times (36)

6. (5sc, inc.) – 6 times (42)

7. (6sc, inc.) – 6 times (48)

8. (7sc, inc.) – 6 times (54)

9. (8sc, inc.) – 6 times (60)

10-17. 60 sc

18. (dec, 8sc) -6 times (54)

19. 9sc, (then we knit the nose, start knitting from 3 loops to the beginning of the row on the nose, so

so that 6 decoks in the last row on the nose are below, i.e. above the mouth) 9sc on the head and nose

together, (the whole nasal tying site was 9sc), 36sc over the head. (54)

I drew a little diagram, with which loop you need to start tying your nose, I hope it is clear

20. 54sc

21.10sc, (then grab 1 pillar of the nose and knit together with the pillar of the head),

8sc, (then grab 1 pillar of the nose and knit together with the pillar of the head), 34sc

on the head (54)

22.54sc

23.11sc, (grab 1 pillar of the nose and knit together with the pillar of the head), 7sc, (1

pillar. nose with 1 pillar. heads), 34sc (54)

We stuff our nose.

24.12sc, (2sc of the nose with one pillar of the head), (1sc of the nose with one sc of the head), (1sc

nose with 1 sc head), (2sc nose with 1 sc head), (1sc nose with 1sc

head) -3 times, (2sc of the nose along with the pillar of the head), on the head 34sc (54)

25. (7sc, dec.) – 6 times (48)

26.48sc.

27. (6sc, dec) -6 times (42)

28.42sc

29. (5sc, dec.) – 6 times (36)

30.36sc

31.10sc, (inc.) – 5 times (these incavations are for where they should be exactly under the nose, if

does not match, then shift the beginning of the row to the desired number of loops) 21sc (41)

32.41sc.

33.dec, 26sc., Dec, 4sc., Dec., 5sc. (38)

34.dec, 25sc, dec, 3sc, dec, 4sc (35)

35.dec, 6sc, (dec.) – 5 times, 5sc, dec., 2sc, dec., 2sc, dec., 2sc. (26)

36.dec., 3sc, (dec.) – 5 times, 2sc, dec., 7sc (19)

37.19sc.

38.5sc, (dec.) – 2 times, 10sc. (17)

39.5sc, dec., 10sc. (16)

40.16sc We do not break the thread, we will continue to knit the body.

BODY

We shift the beginning of the row by 2 loops.

İncavki is the shoulders, make sure that they are on the sides

41. (inc.) – 2 times, 6sc, (inc.) – 2 times, 5sc, double inc (22)

42.double.incav, 9sc, (double inc.) -2 times, 10sc. (28)

43. (double.inc.) – 2 times, 12sc, (double.inc.) – 2 times, 12sc. (36)

44.2sc, (double .inc.) – 2 times, 16sc, (double.inc) -2 times, 14sc. (44)

45.3sc, (double .inc.) – 2 times, 21sc, (double.inc.) – 2 times, 16sc (52)

46.7sc, (double .inc.) – 2 times, 24sc, (double.inc.) – 2 times, 17sc (60)

47.9sc, (double inc.) – 2 times, 28sc, (double inc) -2 times, 19sc (68)

48.11sc, (doubleinc.) -2 times, 32sc, (doubleinc.) – 2p, 21sc (76)

49.13sc, (doubleinc.) – 2 times, 36sc, (doubleinc.) – 2p, 23sc (84)

50-56. 84sc.

57.7sc., Skip 20 sc (hand), connect the 8th with 29 columns, 22sc, skip 20 sc

(arm), connect 52 to 74 column, 11sc. (42)

we knit a belly

58-59 42 sc.

60.8sc, inc., 10sc, (inc.) – 2 times, 10sc, inc., 8sc, (inc.) – 2 times (48)

61. (7sc, inc) -6 times (54)

62. (8sc, inc.) – 6 times (60)

63. (9sc, inc) -6p (66)

64. (10sc, inc.) – 6p (72)

65. (11sc, inc) -6p (78)

66. (12sc, inc) -6p (84)

67. (13sc, inc) -6p (90)

68. (14sc, inc) -6p (96)

69-77.96sc.

78. (14sc, dec) -6p (90)

79. (13sc, dec.) – 6p (84)

80. (12sc, dec.) – 6p (78)

81 (11sc, dec) -6p (72)

82. (10sc, dec) -6p (66)

83. (9sc, dec.) – 6p (60)

84. (8sc, dec) -6 times (54)

85. (7sc, dec) -6 times (48)

Insert the wire into the head and body. We are stuffing.

divide the knitting into 2 parts for the legs. The first column is connected to the 24th. We knit a leg.

86-95. 24sc

on the remaining columns we knit the second leg similarly to the first. Insert

we stuff the wire.

HANDS (left.right)

primary color

Attach the thread to the left 20 loops of the hand on the body under the arm from the side

backs.

1-3.20sc

4. dec, 18sc (19)

5-10.19sc

11.9sc, (dec) -3 times, 4sc (16)) these decakes, elbow, they should be with the outside

side of the hand (shown in the photo by an arrow) if not matching, loop

bias

12.9sc, dec, 5sc (15)

13-20.15sc

Change the color to black (gloves)

21.4sc, inc., 4sc, inc., 4sc, inc. (18)

22-26.18sc

We shift the beginning of the row by 5 sc, or how much you get, so that the mitten

was in a natural position with respect to the hand.

27.dec, 7sc, dec, 7sc (16)

We insert the wire in both hands, we stuff.

28.dec, 6sc, dec, 6sc (14)

29.dec, 5sc, dec, 5sc (12)

30.dec, 4sc, dec, 4sc. (10)

31.dec, 3sc, dec, 3sc (8)

Dec to the end. fasten the thread. hide

BOOTS

black yarn

2 details

We dial 12 ch

1. knit in the second column from the hook 10sc, double incavka, 10sc on the other side

chains. (23)

2.double.inc., 10sc, (inc.) – 2p, 10sc (27)

3. (inc.) – 3 times, 10sc, inc., 1 sc, inc., 10sc, inc. (33)

4. (inc.) – 6 times, 12 sc, inc., 1sc, inc., 12sc (41)

5.inc, 8sc, inc., 13sc, inc., 2sc, inc., 1sc., Inc., 12sc (46)

6. 46sc behind the back wall

7-8. 46sc

9.42sc, 4hdc (46)

10.16 hdc, 25sc, 5hdc (46)

11.16hdc, 25sc, 5 hdc (46)

12.16 hdc, 26sc, (dec) -2 times (44)

13. (dec) -7 times, 26sc, (dec hdc) -2 times (35)

14. (dec hdc) -4 times, 25sc, dec (30)

15. (dec) -4p, 22sc (26)

16-18.26sc

19.7sc, SL-ST leave the thread for sewing. Cut cardboard insoles and paste into

shoes, stuff. You don’t need to sew yet, first we put on panties.

JACKET

Yarn Semenovskaya “Lydia” in three additions, hook number 1.25

We knit raglan, rotary rows, at the end of each row a lifting loop

1.Type 35 ch

2. starting from the second column we knit 34sc

3.5sc, (inc), 5sc, (inc), 10sc, (inc), 5sc, (inc), 5sc (38)

4.5sc, (inc), 6sc, (inc), 11sc, (inc), 6sc, (inc), 6sc (42)

5.6sc, (inc), 7sc, (inc), 12sc, (inc), 7sc, (inc), 6sc (46)

6.6sc, (inc), 8sc, (inc), 13 sc, (inc), 8sc, (inc) 7sc (50)

7.7sc, (inc), 9sc, (inc), 14sc, (inc), 9sc, (inc), 7sc (54)

8. 7sc, (inc), 10sc, (inc), 15sc, (inc), 10sc, (inc), 8sc (58)

9.8sc, (inc), 11sc, (inc), 16bn, (inc), 11sc, (inc), 8sc (62)

10.8sc, (inc), 12sc, (inc), 17sc, (inc), 12sc, (inc), 9sc (66)

11.9sc, (inc), 13sc, (inc), 18sc, (inc), 13sc, (inc), 9sc (70)

12.9sc, (inc), 14sc, (inc), 19sc, (inc), 14sc, (inc), 10sc (74)

13.10sc, (inc), 15sc, (inc), 20sc, (inc), 15sc, (inc), 10sc (78)

14.10sc, (inc), 16sc, (inc), 21sc, (inc), 16sc, (inc), 11sc (82)

15.11sc, (inc), 17sc, (inc), 22sc, (inc), 17sc, (inc), 11sc (86)

16.11sc, (inc), 18sc, (inc), 23sc, (inc), 18sc, (inc), 12sc (90)

17.12sc, (inc), 19sc, (inc), 24sc, (inc), 19sc, (inc), 12sc (94)

18. 12sc, (inc), 20sc, (inc), 25sc, (inc), 20sc, (inc), 13sc (98)

19. 13sc, (inc), 21sc, (inc), 26sc, (inc), 21sc, (inc), 13sc (102)

20. 13sc, (inc), 22sc, (inc), 27sc, (inc), 22sc, (inc), 14sc (106)

21.14sc, (inc), 23sc, (inc), 3sc, inc., 3sc, inc., 12sc, inc., 3sc, inc., 3sc, (

inc), 23sc, (inc), 14sc (114)

22. 8sc, inc., 5sc., Then we knit the 6th column along with the first sc of the back (i.e.

skip 23 sc., (sleeve)), 2sc, (inc., 9sc) -3 times, inc., 2sc, last column of the back

together with the first shelf (skip 23 sc. (sleeve)), 5 sc, inc., 9sc. (72)

23.72sc

24.8sc, (inc., 8sc) -6 times (78)

25.9sc. (Inc., 9sc) -6 times (84)

26-33. 84 sc. Break the thread, hide.

SLEEVE

We knit in straight back rows. At the end of each row is a lifting column. Bind

the thread to the sleeve of the jacket under the armpit.

We knit 15 rows of 23sc.

We tie the edge of the jacket and sleeves with two rows of white fluffy yarn (I have ALPINA Baby).

Panties

Yarn “Lydia” in three additions.

Dial 72 ch., Connect into magic ring

1-11. 72sc.

12. (10sc, dec.) – 6 times (66)

13. (9sc, dec) -6 times (60)

14. (8sc, dec) -6 times (54)

15. (7sc, dec) -6 times (48)

16-18. 48sc.

We knit the legs.

19.connect the first column with the 25th column (divided into legs)

Next, in a circle, we knit the first leg, 7 rows of 24sc.

Break the thread, fix.

The second leg is similar to the first.

We tie the bottom of the legs to a white boucle.

Cap

We collect 42 sc yarn boucle white

1-2.42sc

3-7. yarn “Lydia” red 42sc

8. (5sc, dec) -6 times (36)

9. (4sc, dec) -6 times (30)

10. (3sc, dec) -6 times (24)

11-14. 24sc

15. (2sc, dec) -6 times (18)

16-18. 18sc

19 (1sc, dec) -6 times (12)

20-25. 12 sc

26. dec, 4sc, dec, 4sc (10)

27-30. 10sc

31. dec, 3sc, dec, 3sc (8)

32-35. 8sc

36. dec, 6sc. (7)

37-39.7sc

40.dec, 5sc (6)

Go to the white boucle (pompom)

41. (inc) -6 times (12)

42 (inc., 1sc) -6 times (18)

43-44. 18sc, stuff the pompom

45. dec to the end.

Assembly and design

We make the weight of the bottom gde.

EYES

From white wool we twist the balls for the eyes. On the pillow for felting a little

we give them a shape.

We attach blanks to the head and roll

When the eyes become hard enough, roll over the pupils of black wool.

We lay red wool in the mouth.

KNITTED EYES (from the tested toy Punk Irina) white yarn

1.6 sc per ring

2.6 incav = 12 sc

3. 3 incavals, 3 sc, 3 incavails, 3 sc = 18 sc

4. (D, sc) * 3 times, 3 sc, (D, sc) * 3 times, 3 sc = 24 sc

5.24 sc, offset loop

6. (Dec, sc) * 3 times, 3 sc, (dec, sc) * 3 times, 3 sc = 18 sc, sl-st.

Then fill and sew to the head

CENTURY (optional)

1.6sc in ring (6)

2. (inc) -6 times (12)

3. (1sc, inc) -6 times (18)

4. (2sc, inc) -6 times (24)

5-7. 24sc. To sew

HAIRSTYLE

We tear off a piece of white wool and roll it under the nose (mustache).

Another beard piece.

Fold in half, roll under gdecoy.

Tack hair

Now curls. For raw cleaning, wind the ends of the hair and beard.

We put on a jacket, sew. We put on panties. We put the legs in the shoes, sew it in. We insert the wire into the cap cap (we’ll leave the end of the wire more authentic so that you can

insert into the head for strength) we’ll slightly cap the cap, do not stuff the cap tail

necessary. Sew to the head.

BELT

Cut the buckle out of cardboard, glue it with a shiny ribbon, insert the strap.

Santa is ready!

thirteen

A BAG WITH PRESENTS

6sc red yarn in a ring

1. (inc) -6 times (12)

2. (1sc, inc.) – 6 times (18)

3. (2sc, inc) -6 times (24)

4. (3sc, inc) -6 times (30)

5. (4sc, inc) -6 times (36)

6. (5sc, inc) -6 times (42)

7. (6sc, inc) -6 times (48)

8. (7sc, inc) -6 times (54)

9. (8sc, inc) -6 times (60)

10-30. 60sc

31 rows. (3sc, then make a fold (skip 3sc, we knit the fourth together with the first

from missed)) – 8 times, 3sc (35)

32. (2sc, dec) -8 times, 3sc (27)

33. inc in each column (54)

34-38 54sc. Fasten the thread, hide it. Put a little filler in the bag or

large beads, tie a ribbon, glue rhinestones. Sew to the back of the horse.

Stand

There are no photos, so I’ll try to describe how I did it.

For the base, I took three old discs. Glued them together

From felt (it is possible from cardboard) I cut an oval in the form of a workpiece from disks.

From white wool she fell slightly (not completely, but so that she only kept her shape).

I glued discs to felt, and a pancake made of wool on top. The edge of the stand pasted

To the grandfather with the horse stood more or less stable, in those places where they

will stand made holes in the wool and glued the feet of the toys to the discs.

HORSE:

NOSTRIES

2 details

In gray.

We dial 6sc into the ring

1.inc-6 times (12)

2. (1sc, inc.) – 6 times (18)

3-5.18sc

We connect the last column with the 9th column.

Fasten the thread, leave the end for sewing.

Muzzle-HEAD

In gray.

6sc in the ring

1. (inc) -6 times (12)

2. (1sc, inc.) – 6 times (18)

3. (2sc, inc.) – 6 times (24)

4. (3sc, inc.) – 6 times (30)

5. (4sc, inc.) – 6 times (36)

6. (5sc, inc.) – 6 times (42)

7. (6sc, inc.) – 6 times (48)

8. (7sc, inc.) – 6 times (54)

9-11.54sc

We knit the nostrils

12.5sc along the muzzle and nostril together,

15sc, (5sc along the muzzle and along the nostril together, 29sc (54)

13.5sc across the nostril, 2sc across the muzzle, dec, 7sc, dec, 2sc, 5sc across the nostril, dec, 7sc,

dec, 7sc, dec, 7 sc, dec (48)

fifteen

14.48sc

15. (6sc, dec) -6 times (42)

16.42sc

17 (5sc, dec) -6 times (36)

18. (4sc, dec) -6 times (30)

19. (3sc, dec) -6 times (24) We stuff

Change color to brown

20-26. 24sc

then we make sure that the incavals are exactly under the head, if it does not fit, we make loops

bias

27. inc., 15sc, (inc.) – 8 times (33)

28.1sc., Inc, 15sc, (inc., 1sc) -8 times (42)

29-32. 42 sc

33. 18sc, (dec) -12 times (30)

34.30sc

35.18sc, (dec) -6 times (24)

36-38. 24sc

39. (dec, 2sc) -6 times (18)

40. (dec, 1sc) -6 times (12) dec before closing

The head is ready!

BODY

In brown.

6 sc in the ring

1. (inc.) – 6 times (12)

2. (inc., 1sc) -6 times (18)

3. (inc., 2sc) -6 times (24)

4. (inc., 3sc) -6 times (30)

5. (inc., 4sc) -6 times (36)

6-12. 36 sc

13. (inc., 1sc) -5 times, 26sc (41)

14-16. 41sc

17. (inc., 1sc) -7 times, 27sc (48)

18-24. 48sc

25.3sc, (dec, 1sc) -6 times, 27 sc (42)

26-28. 42sc

29.1sc, dec, 19sc, dec, 18sc (40)

30-31. 40sc

32.1sc, dec, 17sc, dec, 18sc (38)

33. 38sc

34.dec, 17sc, dec, 17sc (36)

35. (dec, 4sc) -6 times (30)

36. (dec, 3sc) -6 times (24)

37. (dec, 2sc) -6 times (18)

38. (dec, 1sc) -6 times (12)

39.dec to the end. Break the thread. Leave for sewing

NECK

Dial brown 14 ch

We connect in a ring, knit in a circle.

1-14.13sc.

Further back by turning rows at the end of ch., Turn.

15.7sc, ch, turn

16.6sc, ch, rotation

17.5 sc, ch, turn

18. 4sc, ch, turn

19.3sc.

leave the thread for sewing to the head.

Hoofs

Black yarn dial 2 ch

1. In the 2nd column we knit 4 sc, ch, turn (4)

2. (inc) -4 times, ch, turn (8)

3-4. 8sc, ch, rotation

5. (inc) -8 times, ch, turn (16)

6. 16sc, we knit further on the base of the resulting fan 10sc.

7.16sc, 10sc. behind the back wall (26)

8.5sc, (dec) -3 times, 5sc, dec, 6sc, dec (21)

cardboard can be inserted into the sole

9. dec, 9sc, dec, 8sc (19)

10. dec, 8sc, dec, 7sc. (17)

11.17sc

12. dec, 7sc, dec, 6sc (15)

RIGHT FOOT RIGHT

We continue to knit on the hoof with brown yarn.

13.15sc

14.dec, 6sc, dec, 5sc (13)

15.9sc, (dec) -2 times, (11) decakes should be behind the hoof. If necessary, do

offset loops.

16-20. 11sc

Next we knit the joint, located behind.

We knit in straight back rows, at the end of the row ch, turn

The beginning of the row is shifted by 2 columns, ch, turn

21. skip the first column, 4sc, ch, rotation

22. first sc skip, 3sc, ch, turn

23. first sc skip, 2sc, ch, turn

Knit in a circle

24.2sc, 3sc downhill, 6sc on the foot, 3sc downhill (14)

25.3sc, dec at the fold, 4sc, dec at the fold, 2sc. (12)

26-28.12sc

29.1sc, dec, 4sc, inc., Inc., 3sc. (13)

30.7sc, inc., 4sc (14)

31.7sc, (inc.) – 4 times, 3sc (18)

32. 18sc

33.9sc, (inc) -4 times, 5sc (22)

34.22sc

35.1sc, (inc.) – 3 times, 10sc, dec, 6sc (24)

36. 3sc, SL-ST, ch, rotation

37.15sc, SL-ST, ch, turn

38 14sc, SL-ST leave thread for sewing. to stuff

LEFT LEFT LEG

We knit up to the 25th row as the right one. Next, slightly increase the joint height

26.3sc, ch, rotation

27.3sc, ch, rotation

28.3sc, continue in a circle

(dec) -2 times, 4sc, (dec) -2 times (11)

29. dec, 3sc, dec, (inc) -2 times, dec (10)

30.5sc, (inc) -2 times, 3sc (12)

31.6sc, (inc) -3 times, 3sc (15)

32.1sc, dec, 5sc, (inc) -2 times, 5sc (16)

33. (dec) -2 times, 4sc, (inc) -2 times, 6sc (16)

34.16sc

35.1sc, inc., 6sc, dec, 6sc (16)

36. (inc) -3 times, 5sc, (dec) -2 times, 4sc (17)

37. (inc) -6 times, 4sc, (dec) -3 times, 1sc (20)

38.5sc, inc., 14sc (21)

39.5sc, inc., 1sc, inc., 8sc, dec, 3sc (22)

40.6sc, (inc) -4 times, 8sc, dec, 2sc (25) SL-ST.

41.16 sc, SL-ST, ch, turn

42 16sc, SL-ST. Fasten the thread, leave the end for sewing.

LEGS FORWARD

FIRST

We knit up to 14 rows as back

15. dec, 5sc, dec, 4sc (11)

16.8sc, dec, 1sc (10)

17-20. 10sc

21.2sc, 4dc, 4sc (10)

23-24. 10sc

25.1sc, inc., 4sc, inc., 3sc (12)

26.12sc

27.2sc, inc., 5sc, inc., 3sc (14)

28.14sc

29.1sc, SL-ST, ch, rotation

30.7sc, SL-ST. Fasten, leave for sewing.

SECOND

We knit 28 rows as the first leg

29.10sc, SL-ST, ch, turn

30 7sc, SL-ST. Tear off the thread, leave the end for sewing.

Ears

2 details.

We dial 12ch. Knit around the chain

Starting from the second column

1st row. 2sc, 2hdc, 3dc, 2hdc, 1sc, in one loop (SL-ST, ch, SL-ST) further on the other side

chains.

1sc, 2hdc, 3dc, 2hdc, 2sc (23)

2nd row. 11sc, inc., 11sc (24). Fasten, leave the end for sewing.

ASSEMBLY CLEARANCE

We insert the wire into the head, neck, body. Sew the neck to the head, stuff it,

sew to the body

Insert the wire into the legs. sew the hind legs in the region of the 7th row of the body, the front

area 33 rows of the body. Ears on the 3-4th row until closing of the loops of the head.

EYES

From white wool we twist small balls of different sizes (one eye is larger,

another smaller one) lightly roll them with a needle for felting, give shape to the pillow

for felting. Then put on the head and roll to the end. When the eyes

become hard enough, roll pupils from small balls of black

wool.

Muzzle for mouth

Make a fold at the bottom of the muzzle. We fasten with several stitches.

nostril tightening

We introduce the needle, tighten so that the nostrils are flattened a little.

MANE, TAIL

We tear off a small piece of gray wool, roll the mane, bangs, tail.

The horse is READY!

The post Santa Claus And Horse Amigurumi Free Pattern appeared first on En.amigurumitariflerim.com.