Poppy Doll Amigurumi Free Pattern

MATERIALS 

Red Poppy (No: 1) 

 2.5 mm crochet hook 

 Bead fiber 

 Location marker 

 needle for sewing 

 Catania 105 (off-white) 

 Catania 106 (full white) 

 Catania 161 (brown) 

 Catania 412 (green) 

 Catania 263 (skin) 

 Catania 110 (black) 

 Catania 390 (tomato red) 

 Catania 115 (red) 

 Catania 403 (yellow) 

Pink Poppy (No: 2) 

 Catania 105 (off-white) 

 Catania 106 (full white) 

 Catania 161 (brown) 

 Catania 418 (green) 

 Catania 263 (skin) 

 Catania 110 (black) 

 Catania 409 (pink) 

 Catania 424 (red) 

 Catania 403 (yellow) 

 Catania 412 (green) 

TERMS and ABBREVIATIONS 

ch: Chain (chain) 

sc: single crochet

dc: double crochet

hdc: half double crochet. 

we sink by taking it and it is like a tight needle 

we take off at once. Fake frequent needle too trying.) 

inc: increase

dec: decrease 

blo: back loop (knit by sinking the back thread) 

flo: front loop (knitting by sinking the front yarn) 

rnd: round (tour) 

st: stitch (loop) 

sl st: slipstitch (loop shift) 

3 tog: together (knit 3 loops together) 

4 tog: (knit 4 loops together) 

DESCRIPTIONS 

 This recipe is a completely original product and belongs to me, duplication, distribution and sharing is prohibited. 

 You can sell the dolls you knit with this recipe. 

“The length of the baby you will knit with this recipe is approximately 30 cm.” 

 The baby is presented in two forms, sitting and standing. You can knit as you wish. 

 In addition, the baby’s skirt is formed in two different ways. You can apply as you wish. 

 You should knit this pattern in a spiral form before finishing the row. 

 While knitting the recipe, always determine the row heads with the loop marker and do not change this point, otherwise you may not be able to catch the form you want in your baby. 

 I recommend you to check the number of stitches from time to time in color transitions and row starts, you should spare time for this to produce a product with a proper form. 

 Thank you very much for choosing to try this recipe, I wish you convenience in advance. 

ARMS 

With skin color number 263 

1st row: 6-pack magic ring (6 sc) 

Row 2: 2 sc, 1 inc (2 times) (8 sc) 

3-20. Rows: (18 rnds) 8 sc (8 sc) 

21. Row: change to yarn 105 and knit 2 sc in each loop from the back loops to form 16 sc as a backloop. (16 sc) 

Row 22: (1 sc, 1 inc) x8 times (24 sc) 

23-25. rows: (3 rnds) 24 sc (24 sc) 

Row 26: (1 sc, 1 dec) x 8 times (16 sc) 

Here just fill the white part of the arm tightly 

27th row: 8 dec (8 sc) 

Cut the thread long and thread it into the needle, thread it once through each loop and tighten it, you will use it to sew the thread, not cut, to the body. 

In the 20th row, knit 8 sc with black to the front loops in the flesh-colored part, cut the rope long, attach it to the needle and make a round so that it goes around the starting loop, then fix the rope and hide it in the arm. You have created the bib of the arm. 

BOOTS, SOCKS AND LEGS 

I used two different shades of green for baby # 1 and baby # 2. Start with the green whatever baby you are knitting. 

Row 1: 7 ch, turn, 5sc from second ch, 4sc to last ch, 5sc (14 sc) in reverse direction 

 Put your loop marker here and move it one row higher in each row, the starting point is very important for the shoe form to be complete !!! 

Row 2: 1 inc, 4 sc, 4 inc, 4 sc, 1 inc (20 sc) 

Row 3: 2 inc, 5 sc, 1 inc, (1 sc, 1 inc) x3, 6 sc (26 sc) 

4th row: Backloop 26 sc 

5-6. Rows: (2 rnds) 26 sc 

Row 7: 6 sc, 8 dec, 4 sc (18 sc) 

 We stand here and make 1 turn of tight needles in black to the remaining frontloop loops knit backloop on the bottom of the boot (26 sc) 

We finish with the technique we apply in arm bias and hide the rest of the rope inside the boat. 

Row 8: 6 sc, 4 dec, 4 sc (14 sc) 

Row 9: 6 sc, 4 tog, 4 sc (11 sc) 

 We fill the entire boot tightly. 

10.-18. Rows: (9 rnds) 11 sc 

Row 11: flo 11 hdc cut long and finish the rope with the needle like the finishing you made on the sole of the boat and hide it in the boot, don’t forget to fill it! 

SOCKS and LEGS 

 In order for the thread passes to come to the back, start with the white thread in the middle of the back, and we can say from the 5th loop, so that the difference in thread passes will remain behind. 

 Do not cut the rope while knitting our black and white striped socks from blo loops, save time and get a smoother look by changing the thread when it comes to the beginning. 

 106 no with full white and 110 no in black; 

1st row: blo 11 sc with white 

2nd row: blo 11 sc with black 

3rd row: blo 11 sc with white 

4th row: blo 11 sc with black 

5th row: blo 11 sc with white 

Row 6: blo 11 sc with black 

 The socks are finished, we cut both threads, hide them inside and fill them. 

7th row: blo 11 sc with 263 ten 

8-22. Rows: (15 rnds) 11 sc 

23-24. Rows: baby # 1 with 390, baby # 2 with 409 (2 rnds) 11 sc 

Finish with the thread back inside, do not cut the rope on the second leg, and you will continue to the body by joining it. 

BABY NO.1 BODY 

I knit this baby so that he can sit and his legs can move freely. If you want your baby to sit, continue here, if you want a standing baby, you should continue with baby number 2. 

Row 1: On the leg that you do not cut the rope, knit 5 sc by combining the loops together, pass to the other leg with 5 chains and in the same way, knit 5 sc by combining the loops of this one, pull 1 chain and turn 

Row 2: Flo 5 sc, 5 sc on the chain, flo 5 sc, turn the rest of the block loop, continue with the loops, 5 sc, 5 sc on the chain, 5 sc (30sc) 

 Wear a loop marker here and try to put it in the same place in each row, you can also use a 15-20 cm thread, I do so. 

BABY NUMBER 2 BODY 

After finishing two rows of pink, knit another 5 sc with the left foot in front of it and add it to the right foot with 4 chains, 11 sc, 4 sc on the chain, 11 sc, 4 sc on the other side of the chain, 6 sc (30 sc) 

Here we attach the loop marker and continue from the 3rd Row. From here on, both babies will continue in the same way. 

Row 3: 1 inc, 6 sc, 1 inc, 6 sc, 1 inc, 7 sc, 1 inc, 7 sc (34 sc) 

4-12. Rows: (9 rnds) 34 sc 

13th row: 1 dec, 15 sc, 1 dec, 15 sc (32 sc) 

14-15. Rows: (2 rnds) blo 32 

16th row: blo 32 with black 

17th row: 32 sc 

SKIRT 

After cutting the black rope, the baby’s skirt 

we start knitting. Skirt-bottom skirt and top-skirt 

It consists of two floors. Bottom skirt one 

piece, top skirt from 4 or 8 pieces 

occurs. 3 small leaves in front of baby number 1 

and there is 1 big leaf in the back, number 2 

the baby has 8 small leaves. Both of them 

as someone who has tried, like baby number 1 

I recommend you to knit, but those who want 

Of course, they can also knit 8 leaves. No. 1 

strings with code 115 in baby and 424 in baby number 2 

we are using. 

1st place: 14th placed flo first 

We will make 32 dc to the loops. Slst the order with 2 chains to the second row we are passing. (32 dc) 

Row 2: One single, one double dc for each loop 

we complete the order. (48 dc) 

3rd Row: 1 round 48 dc 

4th Row: 7 dc, 1 inc dc, (6 times) (54 dc) 

5,6,7. Rows: (3 rnds) 54 dc 

8th Row: To the next 6 loops in order 

1 sc, 2 hdc, 2 dc, 2 dc, 2hdc, 1sc 

doing it and repeating it 9 times. 

9 waves will form at the ends of our skirt. 

We finish it by attaching it to the needle again. 

Top skirt (4 or 8 pieces) 

15th and 16th rows flo to make the top skirt 

We will use the loops. Make the first leaf 

starting from the starting point of the 15th row for 

and we knit it towards the front of the baby. 

1st Row: Baby # 1, code 390, # 2 

baby with yarn code 409 15. Ordinary 4 

sc, 8 sc in the 16th row to 4 sc, 

Turn 1ch (bottom row of 4 loops, 4 

the top row of the loop 

It will make it stand in layers. All 

leaves start like this 

we will knit. 

Row 2: 8 sc, turn 1ch 

Row 3: 1 inc, 3 sc, 1 inc, 2 sc, 1 inc, 1 ch 

turn (11 sc) 

Row 4: 11 sc, turn 1 ch 

5th row: 1 inc, 9 sc, 1 inc, turn 1 ch (13 sc) 

6th row: 1 inc, 5 sc, 1 inc, 5 sc, 1 inc, 1 ch 

turn (16 sc) 

Row 7: 16 sc, turn 1 ch 

Row 8: 1 inc, 14 sc, 1 inc, turn 1 ch (18sc) 

9- 14 rows: (6 rows) 18 sc, turn 1 ch 

15. Row: 2 sc, 3 hdc, 8 dc, 3 hdc, 2 sc after knitting, then knit 15 sc on the side of the leaf and finish with slst and hide the thread. 

In this way, you will knit a total of 8 leaves. Baby number 1 has 3 leaves and a large leaf on the back, while baby number 2 has 8 leaves. If you are knitting baby no.1; After 3 leaves in the front part, continue as follows to knit the whole section that comes to the back. 

Row 1: 4 sc from row 15, 20 sc from row 16, turn 1 ch (24 sc) 

Row 2: (3 sc, 1 inc) x6, 1 ch, turn (30 sc) 

Row 3: 1 inc, 28 sc, 1 inc, turn 1 ch (32 sc) 

Row 4: 32 sc, 1 ch, turn 

Row 5: 1 inc, (4 sc, 1 inc) x5, 5 sc, 1 inc, 1 ch, turn (39 sc) 

Row 6: 1 inc, 37 sc, 1 inc, turn 1 ch (41 sc) 

Row 7: 41 sc, turn 1 ch 

Row 8: 1 inc, 4 sc, 1 inc. (5 sc, 1 inc) x4, 4 sc, 1 inc, 1 ch, turn (48 sc) 

9. 14. Rows: (6 rows) 48 sc, turn 1 ch 

Row 15: (2 sc, 3 hdc, 6 dc, 3 hdc, 2 sc) x3 

after knitting on the side of the leaf 

Knit 15 sc and finish with slst and thread 

we are hiding. 

Now the part of the body up to here 

fill and top with number 105 off-white 

we will continue to knit the torso. Of black 

We start from where it ends. 

Row 1: blo 32 sc 

2-8. Rows: (7 rnds) 32 sc 

9. Row: (6 sc, 1 dec) x4 (28 sc) 

Switch to 363 skin colors. 

10th row: 28 sc 

Row 11: (5 sc, 1 dec) x4 (24 sc) 

Row 12: 24 sc 

13th row: (2 sc, 1 dec) x6 (18 sc) 

14th row: (1 sc, 1 dec) x6 (12 sc) 

15th row: 12 sc, 3 sc knit more and back to center 

we come and here knot 

to put on our marker and knit the head 

we are starting. 

HEAD 

1st row: 12 inc (24 sc) 

Row 2: (1 sc, 1 inc) x12 (36 sc) 

Row 3: (5 sc, 1 inc) x 6 (42 sc) 

Row 4: (6 sc, 1 inc) x 6 (48 sc) 

5th Row: 3 sc, (7 sc, 1 inc) x5, 4sc (54 sc) 

Row 6: (8 sc, 1 inc) x 6 (60 sc) 

Row 7: 4 sc, (9 sc, 1 inc) x5, 5sc (66 sc) 

Row 8: (10 sc, 1 inc) x 6 (72 sc) 

9-18. Rows: (10 rnds) 72 sc 

 If you are going to do the procedure, 11 to 12. 

In between the rows to the front 

put a little mark on eye work 

you will start here. 

12th to 13th, if you use locked eyes. 

6mm eye with 8 stitches between rows 

you will wear. For your head to come right out 

4 sc in decrements, after 1 dec 

then lightly fill the eye areas, this 

set accordingly, after wearing the eyes 

keep filling. Your baby quite 

He’s got a big head to stand firm 

You should fill the body and neck very well. 

If you look like baby no.1 

your job is easier if you are going to do it 

you will finish without inserting. 

19th Row: (10 sc, 1 dec) x6 (66 sc) 

Row 20: (9 sc, 1 dec) x6 (60 sc) 

21st row: (8 sc, 1 dec) x6 (54 sc) 

22nd row: (7 sc, 1 dec) x6 (48 sc) 

Row 23: (6 sc, 1 dec) x6 (42 sc) 

Row 24: (5 sc, 1 dec) x6 (36 sc) 

Row 25: (4 sc, 1 dec) x6 (30 sc) 

Row 26: (3 sc, 1 dec) x6 (24 sc) 

Here the head, especially the neck and the bottom 

Fill the part tightly. (Strict means 

until you get no fibers) 

Row 27: (2 sc, 1 dec) x6 (18 sc) 

Row 28: (1 sc, 1 dec) x6 (12 sc) 

Row 29: (1 dec) x6 (6 sc) slst with long rope 

cut and finish. 

EYE AND MOUTH PROCESSING 

 I will try to explain with lots of photos. 

First, a black thread in the middle of the head 

I placed a ribbon. 

 3 stitches away from this strip, 11 to 12. 

Thread the needle between the rows. 

Cheeks 

8-in-1 magic loop, finish with slst, rope to sew 

cut long. 

HAIR 

 You will knit in brown with code 161. 

1st row: 6-pack magic ring (6 sc) 

2nd row: 6 inc (12 sc) 

Row 3: (1 sc, 1 inc) x6 (18 sc) 

Row 4: (2 sc, 1 inc) x6 (24 sc) 

5th Row: (3 sc, 1 inc) x6 (30 sc) 

Row 6: (4 sc, 1 inc) x6 (36 sc) 

Row 7: (5 sc, 1 inc) x 6 (42 sc) 

Row 8: (6 sc, 1 inc) x 6 (48 sc) 

Row 9: (7 sc, 1 inc) x6 (54 sc) 

Row 10: (8 sc, 1 inc) x6 (60 sc) 

Row 11: (9 sc, 1 inc) x6 (66 sc) 

Row 12: (10 sc, 1 inc) x6 (72 sc) 

13-20. Rows: (8 rnds) 72 sc 

Row 21: 25 sc, 10 hdc, 3 sc, 1 ch, turn 

22nd Row: 1 dec, 2 sc, 2 dc, 5 dc inc, 3 dc, 

3 hdc, 45 sc, 3 hdc, 4 dc, 2 hdc, turn 1ch 

23rd row: 1 dec, 7 hdc, 44 sc, 3 hdc, 14 dc, 

3 hdc, 1 sc. 1ch, turn 

Row 24: 1 dec, 3 hdc, 15 dc, 2 hdc, 40 sc, 

8 hdc, 3 sc, turn 1ch 

25th row: 1 dec, 10 sc, 1 dec, (5 sc, 1dec) x5, 

23 sc, continue without turning and each 

Knit 20 sc in 1 sc in the loop. 

cut it quite long to sew the rope with 

Finish. 

Sew the hair to the head, then for curl 32 

chain, 3. The first three chains starting from the chain 

3 dc into each, 2 dc to 6 chains in the row and 

knit the remaining chain 1 dc in the last loop 2 

pull chain and join the last chain with slst, 

cut long to sew the thread. 

 After sewing the curl of the hair, 

30 cm long for a knit 

Cut 9 ropes each. Right sideways 

through the same loop 

pass with the help of crochet, knit, 

After tying, cutting the end part 

correct. 

HAIR BAND 

 Take 72 chains with 161 code brown, 

Join slst with the first chain. Pull 2 chains 

and knit 1 dc inside each chain, with slst 

finish the row, move up with 1 chain 

and knit 72 sc, finish with slst and hide the rope. 

 3 with yellow for poppies on it 

make 6 magic rings. (6 sc) 

 blo (1 inc) x6 with black in the second row 

(12 sc) 

With 390 coded thread inside each loop 

blo 3 dc knit, (36 dc) with slst to the first loop 

join and long to sew the rope 

finish by cutting. 

 For the lower part of the big flower in the middle, 

6 magic ring (6sc) with 115 coded rope 

 (1 inc) x6 (12 sc) 

 2 ch, 2dc (24 dc) per loop 

 2 ch, to each of the next 12 loops 

2dc (24 dc), 2 ch slst, 2ch, next 12 

2dc (24 dc), 2ch, to each loop 

slst cut the rope long to sew 

we finish. 

 The big we knit under a ferret 

we sew the piece and brown 

We sew on top of the tape. 

 There will be 4-5 loops between the flowers and 

colorful leaves will touch each other 

after planting all 3 flowers 

we knit the leaves with green thread. 

On the brown band 

serrated with green to the upper and lower parts 

we will make leaves. With rope sc 

we add, 1 sc, pull 7 chains, to chain 2 

add with slst, pull 7 chains again, 2. 

add slst to the chain, 1 in the opposite direction 

sc, pull 7 chains, add to chain 2 with slst, 

1sc, pull 7 chains, slst to chain 2 

add, 1sc, two flowers on top of the tape 

sc and leaves to the middle 

Repeat the above for. 

 After 3 sheets are finished, 

do the same to the edge. 

 When it comes to an end, also a poppy 

you will make the bud. 

 Continue without cutting the rope, pull 10 chains, 

7. Make 2 dc to chain, like popcorn stitch 

Knit 2 dc together, chain 2 to chain 7 

slst, again 2 chains, 7. make 2 dc to the chain, 

knit 2 dc together like popcorn stitch, 

2 chains, 7.Slst the chain, the rope to sew 

cut long. 

 6-in with 390 coded yarn for bud 

magic ring 

 4 rounds of 6 sc, finish slst and hide rope 

 Red with thread remaining in the green 

plant the bud between the two leaves. 

VEST 

1st row: 25 ch, turn, starting from 2nd Ch 24 sc 

2-4. Rows: (3 rnds) 24 sc, turn 1 ch 

5. Row: 8 slst, 8 sc, 1 ch, turn 

6. Row: 8 sc, 1 ch, turn 

7th Row: 8 sc, 1 ch, turn 

8. Row: 8 sc with 12 ch, first in row 4 

add sc in the loop, knit 4 more sc in the downward direction, 

1 ch, turn 

9. Row: 1 sc, sc in the next loop with 4 ch 

combine with (will form a tiny buttonhole), with 4sc, 4 ch 

join sc into the next loop (2nd buttonhole), 

12 sc on the chain, continue without turning 

10. Row: 8 sc, 12 ch with first row of 4th row 

add sc in the first loop, knit 4 more sc in the downward direction, 

1 ch, turn 

11th . Row: 1 sc into the next loop with 4 ch 

join with sc (will form a tiny buttonhole), 4sc, 4 ch 

join sc into the next loop with (2nd buttonhole), 

12 sc on the chain, continue without turning, 

7sc, finish slst. 

 100 chain pull and vest with black 

use to connect. 

# 2 Baby Mouth Processing 

Processing the boat’s threads 

Similar Posts

Leave a Reply