Mickey Mouse Amigurumi Free Pattern
Cartoon hero mickey mouse amigurumi free pattern is waiting for you in this article. You can find everything you are looking for about Amigurumi on our site.
Materials:
* black wire.
yellow and red thread.
white and beige thread. © tapestry needle.
scissors. © filling. 1,7 1.75 needle. 35 35cm wire © glue.
Size: Approximately. 42 cm ..
Abbreviations
ch – chain
sc – single crochet
inc – increase
dec – decrease
FLO – front loop
BLO – back loop
Youtube Video
PATTERN
Body:
The body will be knitted from bottom to top with the transition to the head.
With black wire!
Row 1: 6sc into magic ring
Row 2: (inc, * 6) = (12)
Row 3: (1sc, inc) * 6 = (18)
Row 4: (2sc, inc) * 6 = (24)
Row 5: (3sc, inc) * 6 = (30)
Row 6: (4sc, inc) * 6 = (36)
Row 7: (5sc, inc) * 6 = (42)
Row 8: (6sc, inc) * 6 = (48)
Row 9: (7sc, inc) * 6 = (54)
Row 10: (8sc, inc) * 6 = (60)
Row 11: (9sc, inc) * 6 = (66)
Row 12—23: 66sc. (12rows)
Row 24: (9sc, dec) * 6 = (60)
Row 25: 08sc, dec) * 6 = (54)
Row 26: 54sc. (lrow)
(see photos below)
Row 27p- (7sc, dec) * 6 = (48)
Row 28-33: 48sc. (6row)
Row 34: (6sc, dec) * 6 = (42
You can now start filling the body.
Row 35: (5sc, dec) * 6 = (36)
Row 36: (4sc, dec) * 6 = (30)
Row 37: (3sc, dec) * 6 = (24)
Take a 35 cm wire, make this structure (see photos below).
Wrap the joint with a bandage. Insert the side where the loop of the wire is shortest inside the body and fill the body arow the wire.
The wire is necessary for the stability of the head, as it is large in size.
Row 38: (2sc, dec) * 6 = (18)
Row 39-42: 18sc. (4row)
We don’t pull the thread and start knitting the head.
Head:
Row 43: (2sc, inc) * 6 = (24)
Row 44: (3sc, inc) * 6 = (30)
Row 45: (4sc, inc) * 6 = (36)
Row 46: (5sc, inc) * 6 = (42)
Fill your neck tightly.
Row 47: (6sc, inc) * 6 = (48)
Row 48: (7sc, inc) * 6 = (54)
Row 49: (8sc, inc) * 6 = (60)
Row 50: (9sc, inc) * 6 = (66)
Row 51: (10sc, inc) * 6 = (72)
Row 52: (11sc, inc) * 6 = (78)
Row 53: (12sc, inc) * 6 = (84)
Row 54—73: 84sc. (20rows)
Row 74: (12sc, dec) * 6 = (78)
Row 75: (11sc, dec) * 6 = (72)
Row 76: (10sc, dec) * 6 = (66)
start filling your head.
Row 77: (Osc, dec) * 6 = (60)
Row 78: (8sc, dec) * 6 = (54)
Row 79: (7sc, dec) * 6 = (48)
Row 80: (6sc, dec) * 6 = (42)
Row 81: (5sc, dec) * 6 = (36)
Row 82: (4sc, dec) * 6 = (30)
Row 83: (3sc, dec) * 6 = (24)
Row 84: (2sc, dec) * 6 = (18)
Row 85: (1sc, dec) * 6 = (12)
fill your head.
Row 86: (dec * 6) Finish and finish
Legs (2):
We started to knit the legs of the foot.
With yellow thread.
Row 1: 6sc into magic ring
Row 2: (inc, * 6) = (12)
Row 3: (1sc, inc) * 6 = (18)
Row 4: (2sc, inc) * 6 = (24)
Row 5: (3sc, inc) * 6 = (30)
Row 6: 1sc, inc, (4sc, inc) * 5.3sc. = (36)
Row 7: (5sc, inc) * 6 = (42)
Row 8: 2sc, inc, (6sc, inc) * 5.4sc. = (48)
Row 9-16: 48sc. (8rows)
Row 17: 24sc, (dec, 9sc) * 2, dec = (45)
Row 18: 25sc, (dec, 7sc) * 2, dec = (42)
Row 19: 24sc, (dec, 6sc) * 2, dec = (39)
Row 20: 25sc, (dec, 4sc) * 2, dec = (36)
-Fill
Row 21: 24sc, (dec, 3sc) * 2, dec = (33)
Row 22: 25sc, (dec, 1sc) * 2, dec (30)
Row 23-24: 30sc. (2rows)
Row 25: 24sc, (dec * 3) = (27)
Row 26-35: 27sc. (10rows)
Row 36: (2sc, dec) * 6,3sc. = (21)
Row 37: (1sc, dec) * 7 = (14)
Row 38: (dec * 7)
Fill to the end, finish.
Attach the line and weave 24sc. on the leg. (see photos below)
Further
Row 1-2: 24sc. (2rows)
Row 3: FLO- 24sc.
Leave the yellow wire aside for now.
Attach the black thread and weave –
Row 4: (dec, sc) * 8 = (16)
Row 5-30: 16sc. (26rows)
fill the whole process
We fix the wire and cut.
We return to the left yellow line, knit more – 24sc – (3 rows), fix the line and cut it.
Wrap as in the photo below.
Arms:
We started to weave our fingers. There will be 4 fingers on each hand.
With white thread.
Thumb (2)
Row 1: 6sc into magic ring
Row 2: (inc, * 6) = (12)
Row 3: 12sc. (1row)
Row 4: (4sc, dec) * 2 = (10)
Row 5—6: 10sc. (2rows)
Finish and finish the wire.
1st finger (2)
Row 1: 6sc into magic ring
Row 2: (inc, * 6) = (12)
Row 3: 12sc. (1row)
Row 4: (4sc, dec) * 2 = (10)
Row 5—7: 10sc. (Zrows)
Finish and finish the wire.
2nd finger (2)
Row 1: 6sc into magic ring
Row 2: (inc, * 6) = (12)
Row 3: 12sc. (1row)
Row 4: (4sc, dec) * 2 = (10)
Row 5—8: 10c6h. (4rows)
Finish and finish the wire.
3rd finger (2)
Row 1: 6sc into magic ring
Row 2: (inc, * 6) = (12)
Row 3: 12sc. (1row)
Row 4: (4sc, dec) * 2 = (10)
Row 5—6: 10con. (2rows)
Don’t cut the thread, put a marker, weave more ….
Grease your fingers –
knit 5 sc 3rd finger
5 sc 2rd finger
10 sc 1 rd finger
5 sc 2 rd finger
5 sc 3 rd finger
knit 30 SC – 4 round
Further
for the right hand: we weave 11sc., apply the thumb and, with the thumb, we weave 5sc. Then we weave the remaining 14sc. = (30) (see photos below)
For the left hand:
we weave 18 sc, 5 sc. along with the thumb, 7sc. = (30)
(see photo above) In addition, the pattern for both hands is the same.
Row 1—3: 30sc. (3rows)
We weave taking the remaining 5sc of the thumb.
Row 4: (4sc, dec) * 5 = (25)
Row 5: 25sc. (1row)
Fill your fingers and palm with padding.
Row 6: FLO (3sc, dec) * 5 = (20)
Row 7: (3sc, inc) * 5, = (25) finish and finish the thread
Change to black!
Row 8: BLO (2dec, sc.) * 5 = (15) (see photos below)
Fill your palm all the way
9p-33p- 15sc. (25rows)
On the back surface of your palm, make three stripes with a black thread in two additions! (see photo above).
Sew the pens as pictured below. We haven’t sewed the legs yet! (I noticed the legs temporarily for the photo).
Ears (2):
Row 1: 6sc into magic ring
Row 2: (inc, * 6) = (12)
Row 3: (1sc, inc) * 6 = (18)
Row 4: (2sc, inc) * 6 = (24)
Row 5: (3sc, inc) * 6 = (30)
Row 6p- 1sc, inc, (4sc, inc) * 5.3sc. = (36)
Row 7p- (5sc, inc) * 6 = (42)
Row 8p- 2sc, inc, (6sc, inc) * 5, 4sc. = (48)
Row 9p- (7sc, inc) * 6 = (54)
We fixed the wire. It is necessary to tie such 4 pieces.
Then we add 2 circles on the wrong side to each other and weave the two edges with sc (see photos below)
Face: Eyes
Use beige. Make 6 ch and start from the 2nd ch loop:
Row 1: 4sc, 3sc on the last floor, on the other side of the floor, 3sc, inc = (12)
Row 2: linc, 3sc, 3inc, 4sc, linc = (17)
Row 3: 2inc, 5sc, 3inc, 6sc, linc = (23)
Row 4: 2inc, 8sc, 3inc, 10sc. = (28)
Row 5: Zinc, 11sc, 3inc, 11sc. = (34)
Row 6: (inc, sc) * 3,12sc, (inc, sc) * 3 end with = (30)
(see photos below)
Cheeks:
Make 18 ch and start from the 2nd ch handle:
Row 1: 8sc, inc, 7sc, 3inc, 14sc, inc = (39)
Row 2: 2inc, 2sc, (3sc, inc) * 3,3sc, 3inc, 17sc. = (47)
Row 3: 3inc, 23sc, 3inc, 18sc. = (53)
Row 4: (1sc, inc) * 3,23sc, (1sc, inc) * 3,7sc, 2dec, 7sc. = (57)
Row 5: (2sc, inc) * 4.18sc, (inc, 2sc) * 4.15sc. = (65)
Row 6: (3sc, inc) * 4.20sc, (inc, 3sc) * 4.13sc. = (73)
Row 7: (4sc, inc) * 12.13sc. = (85)
Row 8: (4sc, dec) * 12.13sc. = (73) (see photos below)
Nose:
Row 1: 6sc into magic ring
Row 2: (inc, * 6) = (12)
Row 3: (2sc, inc) * 4 = (16)
Row 4: (3sc, inc) * 4 = (20)
Row 5: 20sc. (1row)
Row 6: (4sc, inc) * 4 = (24)
Row 7: 24sc. (1row)
Row 8: (5sc, inc) * 4 = (28)
Row 9: (6sc, inc) * 4 = (32)
Row 10: (7sc, inc) * 4 = (36)
Row 11: 3sc, inc, (8sc, inc) * 3,5sc. = (40)
We knit in rotating rows
Row 12: 20sc, ch, turn
Row 13: 20sc, ch, turn
Row 14: 20sc, ch, turn
Row 15: 20sc.
Finish and cut the wire
Black nose
With black thread
Row 1: 6sc into magic ring
Row 2: (inc, * 6) = (12)
Row 3: (1sc, inc) * 6 = (18)
Row 4: (2sc, inc) * 6 = (24)
Row 5: (3sc, inc) * 6 = (30)
Row 6: 15dec = (15)
finish and finish (see photos below)
Face assembly:
Place the cheeks and mouth and sew as in my photo, leaving a small space not sewn, through it is necessary to add filling, distribute it only by the edges of the cheeks, in the middle of the filling it should not be!
After sewing this gap. (see photos below)
Fill the black nose with filling and sew on the nose. moving the nose with the padding is not tight. Arrange and sew your nose as in my photo (see photos below)
Then, we make mouth guards, inserting the needle alternately from below (where the smile will be) upwards (where the nose ends). The same is true for 4-5 ducks. While the mouth is not being drawn.
It should look like this
(see photos below)
Then, embroider the mouth with black thread where the mark was made. Insert the line in the corner of the mouth, apply glue to the cavity (where the reduction was made) and stretch the line, placing it in the glue.
Embroider the dimples in the corners of the mouth (making only one stitch)
Then we do the language. We form a semicircle with the same thread, we glue the thread. Inside the semicircle, you can paste felt, paint with pastel or blush – for us (at your discretion).
We painted the corners of the cheeks with a pink blush. We move on to the eyes. From the white felt we cut an oval (2 pcs.).
Take oval eyes (see photos below)
We cut holes in the felt, insert the black eyes there and glue.
the eyes according to the photo
No.1 – (indent from the middle of 2 rows)
No2- (indent 2 lines)
No3- (indent 2 lines)
Apply glue along the edge of the felt and glue the black thread, embroider the lashes. Paint the shine with white acrylic paint. (see photos below)
Tail:
Make 9 ch, and close.
Row 1–10: FLO 9sc. (10rows)
Row 11: 1dec = (8)
Row 12—14: 8sc. (3rows)
Row 15: 1dec = (7)
Row 16—18: 7sc. (3rows)
Row 19: 1dec = (6)
Row 20—22: 6sc. (3rows)
Row 23: 1dec = (5)
Row 24—26: 5sc. (3rows)
Row 27—32: 5sc. (6rows)
Row 33: 1dec = (4)
Row 34—39: 4sc. (6rows)
Row 40: 1dec = (3)
Row 41–43: 3sc. (3rows)
Change to a smaller size needle
finish with 8 ch. Finish and finish.
Shorts:
With red thread.
Weave 80 ch, close the circle. Weave 24 rows.
Then, we divided it into three parts, as in the photo below –
Two parts, which are larger, exist for 32sc.
The middle part is 16sc.
First we knit a part – this is a pant leg, 7 rows (we do not touch the markers, they are not ignored in the calculation)
Then we attach the thread to the other part and knit the second and first legs. Sew the middle with a needle
Sew a tail (see photos below)
